Browse Source

Improve USB Media Host conditions (#20176)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
vanilla_fb_2.0.x
Victor Oliveira 4 years ago
committed by Scott Lahteine
parent
commit
ccac37613b
  1. 4
      Marlin/src/HAL/LPC1768/inc/Conditionals_adv.h
  2. 4
      Marlin/src/HAL/LPC1768/main.cpp
  3. 2
      Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp
  4. 4
      Marlin/src/HAL/STM32/inc/Conditionals_adv.h
  5. 24
      Marlin/src/HAL/STM32F1/HAL.cpp
  6. 4
      Marlin/src/HAL/STM32F1/HAL.h
  7. 5
      Marlin/src/HAL/STM32F1/inc/Conditionals_LCD.h
  8. 8
      Marlin/src/HAL/STM32F1/inc/Conditionals_adv.h
  9. 4
      Marlin/src/HAL/STM32F1/msc_sd.cpp
  10. 9
      Marlin/src/HAL/STM32F1/onboard_sd.cpp
  11. 4
      Marlin/src/inc/Conditionals_post.h

4
Marlin/src/HAL/LPC1768/inc/Conditionals_adv.h

@ -20,3 +20,7 @@
*
*/
#pragma once
#if DISABLED(NO_SD_HOST_DRIVE)
#define HAS_SD_HOST_DRIVE 1
#endif

4
Marlin/src/HAL/LPC1768/main.cpp

@ -122,7 +122,7 @@ void HAL_init() {
delay(1000); // Give OS time to notice
USB_Connect(TRUE);
#if DISABLED(NO_SD_HOST_DRIVE)
#if HAS_SD_HOST_DRIVE
MSC_SD_Init(0); // Enable USB SD card access
#endif
@ -140,7 +140,7 @@ void HAL_init() {
// HAL idle task
void HAL_idletask() {
#if HAS_SHARED_MEDIA
#if HAS_SD_HOST_DRIVE
// If Marlin is using the SD card we need to lock it to prevent access from
// a PC via USB.
// Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but

2
Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp

@ -31,7 +31,7 @@
#error "ERROR - Only STM32F103xE, STM32F103xG, STM32F4xx or STM32F7xx CPUs supported"
#endif
#ifdef USBD_USE_CDC_COMPOSITE
#if HAS_SD_HOST_DRIVE
// use USB drivers

4
Marlin/src/HAL/STM32/inc/Conditionals_adv.h

@ -20,3 +20,7 @@
*
*/
#pragma once
#if defined(USBD_USE_CDC_COMPOSITE) && DISABLED(NO_SD_HOST_DRIVE)
#define HAS_SD_HOST_DRIVE 1
#endif

24
Marlin/src/HAL/STM32F1/HAL.cpp

@ -82,7 +82,7 @@
// Public Variables
// ------------------------
#if (defined(SERIAL_USB) && !defined(USE_USB_COMPOSITE))
#if defined(SERIAL_USB) && !HAS_SD_HOST_DRIVE
USBSerial SerialUSB;
#endif
@ -251,7 +251,7 @@ void HAL_init() {
#if PIN_EXISTS(LED)
OUT_WRITE(LED_PIN, LOW);
#endif
#ifdef USE_USB_COMPOSITE
#if HAS_SD_HOST_DRIVE
MSC_SD_init();
#endif
#if PIN_EXISTS(USB_CONNECT)
@ -263,17 +263,15 @@ void HAL_init() {
// HAL idle task
void HAL_idletask() {
#ifdef USE_USB_COMPOSITE
#if HAS_SHARED_MEDIA
// If Marlin is using the SD card we need to lock it to prevent access from
// a PC via USB.
// Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but
// this will not reliably detect delete operations. To be safe we will lock
// the disk if Marlin has it mounted. Unfortunately there is currently no way
// to unmount the disk from the LCD menu.
// if (IS_SD_PRINTING() || IS_SD_FILE_OPEN())
/* copy from lpc1768 framework, should be fixed later for process HAS_SHARED_MEDIA*/
#endif
#if HAS_SD_HOST_DRIVE
// If Marlin is using the SD card we need to lock it to prevent access from
// a PC via USB.
// Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but
// this will not reliably detect delete operations. To be safe we will lock
// the disk if Marlin has it mounted. Unfortunately there is currently no way
// to unmount the disk from the LCD menu.
// if (IS_SD_PRINTING() || IS_SD_FILE_OPEN())
/* copy from lpc1768 framework, should be fixed later for process HAS_SD_HOST_DRIVE*/
// process USB mass storage device class loop
MarlinMSC.loop();
#endif

4
Marlin/src/HAL/STM32F1/HAL.h

@ -42,7 +42,7 @@
#include "../../inc/MarlinConfigPre.h"
#ifdef USE_USB_COMPOSITE
#if HAS_SD_HOST_DRIVE
#include "msc_sd.h"
#endif
@ -61,7 +61,7 @@
#endif
#ifdef SERIAL_USB
#ifndef USE_USB_COMPOSITE
#if !HAS_SD_HOST_DRIVE
#define UsbSerial Serial
#else
#define UsbSerial MarlinCompositeSerial

5
Marlin/src/HAL/STM32F1/inc/Conditionals_LCD.h

@ -20,8 +20,3 @@
*
*/
#pragma once
#if ENABLED(USE_USB_COMPOSITE)
//#warning "SD_CHECK_AND_RETRY isn't needed with USE_USB_COMPOSITE."
#undef SD_CHECK_AND_RETRY
#endif

8
Marlin/src/HAL/STM32F1/inc/Conditionals_adv.h

@ -20,3 +20,11 @@
*
*/
#pragma once
#ifdef USE_USB_COMPOSITE
//#warning "SD_CHECK_AND_RETRY isn't needed with USE_USB_COMPOSITE."
#undef SD_CHECK_AND_RETRY
#if DISABLED(NO_SD_HOST_DRIVE)
#define HAS_SD_HOST_DRIVE 1
#endif
#endif

4
Marlin/src/HAL/STM32F1/msc_sd.cpp

@ -13,7 +13,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(__STM32F1__) && defined(USE_USB_COMPOSITE)
#if defined(__STM32F1__) && HAS_SD_HOST_DRIVE
#include "msc_sd.h"
#include "SPI.h"
@ -77,4 +77,4 @@ void MSC_SD_init() {
#endif
}
#endif // __STM32F1__ && USE_USB_COMPOSITE
#endif // __STM32F1__ && HAS_SD_HOST_DRIVE

9
Marlin/src/HAL/STM32F1/onboard_sd.cpp

@ -21,10 +21,11 @@
#include "SPI.h"
#include "fastio.h"
#if HAS_SHARED_MEDIA
#ifndef ONBOARD_SPI_DEVICE
#define ONBOARD_SPI_DEVICE SPI_DEVICE
#endif
#ifndef ONBOARD_SPI_DEVICE
#define ONBOARD_SPI_DEVICE SPI_DEVICE
#endif
#if HAS_SD_HOST_DRIVE
#define ONBOARD_SD_SPI SPI
#else
SPIClass OnboardSPI(ONBOARD_SPI_DEVICE);

4
Marlin/src/inc/Conditionals_post.h

@ -360,14 +360,13 @@
*/
#if ENABLED(SDSUPPORT)
#if SD_CONNECTION_IS(ONBOARD) && DISABLED(NO_SD_HOST_DRIVE) && !defined(ARDUINO_GRAND_CENTRAL_M4)
#if HAS_SD_HOST_DRIVE && SD_CONNECTION_IS(ONBOARD)
//
// The external SD card is not used. Hardware SPI is used to access the card.
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
//
#undef SD_DETECT_PIN
#define HAS_SHARED_MEDIA 1
#endif
#if PIN_EXISTS(SD_DETECT)
@ -381,7 +380,6 @@
#define SD_DETECT_STATE LOW
#endif
#endif
#endif
#if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT) || !PIN_EXISTS(SD_DETECT)

Loading…
Cancel
Save