andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

BigTreeTech SKR Mini E3 (#14457)

pull/1/head
Msq001 5 years ago
committed by Scott Lahteine
parent
2f932a11b3
commit
c9be936d4a
5 changed files with 166 additions and 28 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 5
      Marlin/src/core/boards.h
  2. 2
      Marlin/src/pins/pins.h
  3. 139
      Marlin/src/pins/pins_BIGTREE_SKR_MINI_E3.h
  4. 28
      Marlin/src/pins/pins_BIGTREE_SKR_MINI_V1_1.h
  5. 20
      Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h

5
Marlin/src/core/boards.h
View File

@ -245,12 +245,13 @@
#define BOARD_STM32F1R 1800 // STM32R Libmaple based STM32F1 controller
#define BOARD_MALYAN_M200 1801 // STM32C8T6 Libmaple based stm32f1 controller
#define BOARD_STM3R_MINI 1803 // STM32 Libmaple based stm32f1 controller
#define BOARD_GTM32_PRO_VB 1805 // STM32f103VET6 controller
#define BOARD_GTM32_PRO_VB 1805 // STM32F103VET6 controller
#define BOARD_MORPHEUS 1806 // STM32F103C8/STM32F103CB Libmaple based stm32f1 controller
#define BOARD_MKS_ROBIN 1808 // MKS Robin / STM32F103ZET6
#define BOARD_MKS_ROBIN_MINI 1813 // MKS Robin Mini / STM32F103VET6
#define BOARD_MKS_ROBIN_NANO 1812 // MKS Robin Nano / STM32F103VET6
#define BOARD_BIGTREE_SKR_MINI_V1_1 1814 // STM32F103RC
#define BOARD_BIGTREE_SKR_MINI_V1_1 1814 // BigTreeTech SKR Mini v1.1 / STM32F103RC
#define BOARD_BIGTREE_SKR_MINI_E3 1815 // BigTreeTech SKR Mini E3 / STM32F103RC
#define BOARD_JGAURORA_A5S_A1 1820 // JGAurora A5S A1 / STM32F103ZET6
#define BOARD_FYSETC_AIO_II 1890 // FYSETC AIO_II
#define BOARD_FYSETC_CHEETAH 1891 // FYSETC CHEETAH

2
Marlin/src/pins/pins.h
View File

@ -422,6 +422,8 @@
#include "pins_STM3R_MINI.h" // STM32F1 env:STM32F1
#elif MB(BIGTREE_SKR_MINI_V1_1)
#include "pins_BIGTREE_SKR_MINI_V1_1.h" // STM32F1 env:BIGTREE_SKR_MINI
#elif MB(BIGTREE_SKR_MINI_E3)
#include "pins_BIGTREE_SKR_MINI_E3.h" // STM32F1 env:BIGTREE_SKR_MINI
#elif MB(MALYAN_M200)
#include "pins_MALYAN_M200.h" // STM32F1 env:malyanm200
#elif MB(CHITU3D)

139
Marlin/src/pins/pins_BIGTREE_SKR_MINI_E3.h
View File

@ -0,0 +1,139 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef TARGET_STM32F1
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "BIGTREE SKR MINI E3"
#endif
// Release PB3/PB4 (E0 STP/DIR) from JTAG pins
#define DISABLE_JTAG
// Ignore temp readings during develpment.
//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//
// Servos
//
#define SERVO0_PIN PA1
//
// Limit Switches
//
#define X_STOP_PIN PC0
#define Y_STOP_PIN PC1
#define Z_STOP_PIN PC2
//
// Z Probe must be this pins
//
#define Z_MIN_PROBE_PIN PC14
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC15
#endif
//
// Steppers
//
#define X_ENABLE_PIN PB14
#define X_STEP_PIN PB13
#define X_DIR_PIN PB12
#define Y_ENABLE_PIN PB11
#define Y_STEP_PIN PB10
#define Y_DIR_PIN PB2
#define Z_ENABLE_PIN PB1
#define Z_STEP_PIN PB0
#define Z_DIR_PIN PC5
#define E0_ENABLE_PIN PD2
#define E0_STEP_PIN PB3
#define E0_DIR_PIN PB4
#if HAS_DRIVER(TMC2209)
/**
* TMC2209 stepper drivers
* Hardware serial communication ports.
*/
#define X_HARDWARE_SERIAL Serial4
#define Y_HARDWARE_SERIAL Serial4
#define Z_HARDWARE_SERIAL Serial4
#define E0_HARDWARE_SERIAL Serial4
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PA0 // Analog Input
#define TEMP_BED_PIN PC3 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN PC8 // EXTRUDER
#define HEATER_BED_PIN PC9 // BED
#define FAN_PIN PA8
//
// USB connect control
//
#define USB_CONNECT PC13
#define USB_CONNECT_INVERTING false
#define SD_DETECT_PIN PC4
/**
* _____
* 5V | · · | GND
* (LCD_EN) PB7 | · · | PB8 (LCD_RS)
* (LCD_D4) PB9 | · · | PA10 (BTN_EN2)
* RESET | · · | PA9 (BTN_EN1)
* (BTN_ENC) PB6 | · · | PB5 (BEEPER)
* -----
* EXP1
*/
#if HAS_SPI_LCD
#define BEEPER_PIN PB5
#define BTN_ENC PB6
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS PB8
#define BTN_EN1 PA9
#define BTN_EN2 PA10
#define LCD_PINS_ENABLE PB7
#define LCD_PINS_D4 PB9
#else
#error "Only CR10_STOCKDISPLAY is currently supported on the BIGTREE_SKR_MINI_E3."
#endif
#endif // HAS_SPI_LCD

28
Marlin/src/pins/pins_BIGTREE_SKR_MINI_V1_1.h
View File

@ -48,10 +48,6 @@
// Steppers
//
/**
* TODO: Currently using same Enable pin for all steppers.
*/
#define X_STEP_PIN PC6
#define X_DIR_PIN PC7
#define X_ENABLE_PIN PB15
@ -84,8 +80,8 @@
//
// Temperature Sensors
//
#define TEMP_BED_PIN PB1 // Analog Input
#define TEMP_0_PIN PA0 // Analog Input
#define TEMP_BED_PIN PB1 // Analog Input
#define TEMP_0_PIN PA0 // Analog Input
//
// LCD Pins
@ -166,19 +162,19 @@
#if ENABLED(STM32_SD_LCD)
#define ENABLE_SPI3
#define SD_DETECT_PIN PB9
#define SCK_PIN PB3
#define MISO_PIN PB4
#define MOSI_PIN PB5
#define SS_PIN PA15
#define SD_DETECT_PIN PB9
#define SCK_PIN PB3
#define MISO_PIN PB4
#define MOSI_PIN PB5
#define SS_PIN PA15
#else
#define SDCARD_CONNECTION ONBOARD
#define ENABLE_SPI1
#define SD_DETECT_PIN PA3
#define SCK_PIN PA5
#define MISO_PIN PA6
#define MOSI_PIN PA7
#define SS_PIN PA4
#define SD_DETECT_PIN PA3
#define SCK_PIN PA5
#define MISO_PIN PA6
#define MOSI_PIN PA7
#define SS_PIN PA4
#endif
#ifndef ST7920_DELAY_1

20
Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
View File

@ -169,16 +169,16 @@
#define FAN_PIN P2_03
#define HEATER_BED_PIN P2_05
/*
| _____ _____
| NC | · · | GND 5V | · · | GND
| RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
| (MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4)
| (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN)
| (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
| ￣￣ ￣￣
| EXP2 EXP1
*/
/**
* _____ _____
* NC | · · | GND 5V | · · | GND
* RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
* (MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4)
* (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN)
* (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
* ----- -----
* EXP2 EXP1
*/
#if HAS_SPI_LCD
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define BTN_ENC P0_28 // (58) open-drain

Write Preview
Loading…
Cancel
Save