You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
188 lines
4.8 KiB
188 lines
4.8 KiB
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#ifndef TARGET_STM32F1
|
|
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
|
#endif
|
|
|
|
#ifndef BOARD_NAME
|
|
#define BOARD_NAME "BIGTREE SKR mini V1.1"
|
|
#endif
|
|
|
|
//#define DISABLE_DEBUG
|
|
#define DISABLE_JTAG
|
|
|
|
// Ignore temp readings during develpment.
|
|
//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN PC2
|
|
#define X_MAX_PIN PA2
|
|
#define Y_MIN_PIN PC1
|
|
#define Y_MAX_PIN PA1
|
|
#define Z_MIN_PIN PC0
|
|
#define Z_MAX_PIN PC3
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
|
|
#define X_STEP_PIN PC6
|
|
#define X_DIR_PIN PC7
|
|
#define X_ENABLE_PIN PB15
|
|
|
|
#define Y_STEP_PIN PB13
|
|
#define Y_DIR_PIN PB14
|
|
#define Y_ENABLE_PIN PB12
|
|
|
|
#define Z_STEP_PIN PB10
|
|
#define Z_DIR_PIN PB11
|
|
#define Z_ENABLE_PIN PB2
|
|
|
|
#define E0_STEP_PIN PC5
|
|
#define E0_DIR_PIN PB0
|
|
#define E0_ENABLE_PIN PC4
|
|
|
|
#if ENABLED(TMC_USE_SW_SPI)
|
|
#define TMC_SW_SCK PB3
|
|
#define TMC_SW_MISO PB4
|
|
#define TMC_SW_MOSI PB5
|
|
#endif
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN PA8
|
|
#define FAN_PIN PC8
|
|
#define HEATER_BED_PIN PC9
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_BED_PIN PB1 // Analog Input
|
|
#define TEMP_0_PIN PA0 // Analog Input
|
|
|
|
//
|
|
// LCD Pins
|
|
//
|
|
|
|
/**
|
|
* _____ _____
|
|
* NC | · · | GND 5V | · · | GND
|
|
* RESET | · · | PB9 (SD_DETECT) (LCD_D7) PC14 | · · | PC15 (LCD_D6)
|
|
* (MOSI) PB5 | · · | PB8 (BTN_EN2) (LCD_D5) PB7 | · · | PC13 (LCD_D4)
|
|
* (SD_SS) PA15 | · · | PD2 (BTN_EN1) (LCD_RS) PC12 | · · | PB6 (LCD_EN)
|
|
* (SCK) PB3 | · · | PB4 (MISO) (BTN_ENC) PC11 | · · | PC10 (BEEPER)
|
|
* ----- -----
|
|
* EXP2 EXP1
|
|
*/
|
|
|
|
#if HAS_SPI_LCD
|
|
#define BEEPER_PIN PC10
|
|
#define BTN_ENC PC11
|
|
#define LCD_PINS_RS PC12
|
|
|
|
#define BTN_EN1 PD2
|
|
#define BTN_EN2 PB8
|
|
|
|
#define LCD_PINS_ENABLE PB6
|
|
|
|
#if ENABLED(FYSETC_MINI_12864)
|
|
|
|
#define LCD_BACKLIGHT_PIN -1
|
|
#define LCD_RESET_PIN PC13
|
|
#define DOGLCD_A0 PC12
|
|
#define DOGLCD_CS PB6
|
|
#define DOGLCD_SCK PB3
|
|
#define DOGLCD_MOSI PB5
|
|
|
|
#define FORCE_SOFT_SPI // SPI MODE3
|
|
|
|
#define LED_PIN PB7 // red pwm
|
|
//#define LED_PIN PC15 // green
|
|
//#define LED_PIN PC14 // blue
|
|
|
|
//#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
|
// #ifndef RGB_LED_R_PIN
|
|
// #define RGB_LED_R_PIN PB7
|
|
// #endif
|
|
// #ifndef RGB_LED_G_PIN
|
|
// #define RGB_LED_G_PIN PC15
|
|
// #endif
|
|
// #ifndef RGB_LED_B_PIN
|
|
// #define RGB_LED_B_PIN PC14
|
|
// #endif
|
|
//#elif ENABLED(FYSETC_MINI_12864_2_1)
|
|
// #define NEOPIXEL_PIN PB7
|
|
//#endif
|
|
|
|
#else // !FYSETC_MINI_12864
|
|
|
|
#define LCD_PINS_D4 PC13
|
|
#if ENABLED(ULTIPANEL)
|
|
#define LCD_PINS_D5 PB7
|
|
#define LCD_PINS_D6 PC15
|
|
#define LCD_PINS_D7 PC14
|
|
#endif
|
|
|
|
#endif // !FYSETC_MINI_12864
|
|
|
|
#endif // HAS_SPI_LCD
|
|
|
|
//
|
|
// SD Card
|
|
//
|
|
|
|
// By default the onboard SD is enabled.
|
|
// To disable it and use an external SD (connected to LCD)
|
|
// enable STM32_SD_LCD.
|
|
|
|
//#define STM32_SD_LCD
|
|
|
|
#if ENABLED(STM32_SD_LCD)
|
|
#define ENABLE_SPI3
|
|
#define SD_DETECT_PIN PB9
|
|
#define SCK_PIN PB3
|
|
#define MISO_PIN PB4
|
|
#define MOSI_PIN PB5
|
|
#define SS_PIN PA15
|
|
#else
|
|
#define SDCARD_CONNECTION ONBOARD
|
|
#define ENABLE_SPI1
|
|
#define SD_DETECT_PIN PA3
|
|
#define SCK_PIN PA5
|
|
#define MISO_PIN PA6
|
|
#define MOSI_PIN PA7
|
|
#define SS_PIN PA4
|
|
#endif
|
|
|
|
#ifndef ST7920_DELAY_1
|
|
#define ST7920_DELAY_1 DELAY_NS(125)
|
|
#endif
|
|
#ifndef ST7920_DELAY_2
|
|
#define ST7920_DELAY_2 DELAY_NS(125)
|
|
#endif
|
|
#ifndef ST7920_DELAY_3
|
|
#define ST7920_DELAY_3 DELAY_NS(125)
|
|
#endif
|
|
|