Giuliano Zaro
5 years ago
committed by
Scott Lahteine
Scott Lahteine
5 changed files with 1 additions and 279 deletions
@ -1,259 +0,0 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
*/ |
|||
|
|||
/**
|
|||
* Adafruit Grand Central M4 pin assignments ported by Giuliano Zaro |
|||
*/ |
|||
#ifndef ARDUINO_GRAND_CENTRAL_M4 |
|||
#error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'" |
|||
#endif |
|||
|
|||
#define BOARD_INFO_NAME "RuRAMPS4AGCM4 v1.3" |
|||
|
|||
//
|
|||
// Servos
|
|||
//
|
|||
#define SERVO0_PIN 5 |
|||
#define SERVO1_PIN 3 |
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_MIN_PIN 45 |
|||
#define X_MAX_PIN 39 |
|||
#define Y_MIN_PIN 46 |
|||
#define Y_MAX_PIN 41 |
|||
#define Z_MIN_PIN 47 |
|||
#define Z_MAX_PIN 43 |
|||
|
|||
//
|
|||
// Z Probe (when not Z_MIN_PIN)
|
|||
//
|
|||
#ifndef Z_MIN_PROBE_PIN |
|||
#define Z_MIN_PROBE_PIN 49 |
|||
#endif |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_STEP_PIN 37 // Support Extension Board
|
|||
#define X_DIR_PIN 36 |
|||
#define X_ENABLE_PIN 31 |
|||
#ifndef X_CS_PIN |
|||
#define X_CS_PIN 38 |
|||
#endif |
|||
|
|||
#define Y_STEP_PIN 32 // Support Extension Board
|
|||
#define Y_DIR_PIN 35 |
|||
#define Y_ENABLE_PIN 31 |
|||
#ifndef Y_CS_PIN |
|||
#define Y_CS_PIN 34 |
|||
#endif |
|||
|
|||
#define Z_STEP_PIN 30 // Support Extension Board
|
|||
#define Z_DIR_PIN 2 |
|||
#define Z_ENABLE_PIN 31 |
|||
#ifndef Z_CS_PIN |
|||
#define Z_CS_PIN 10 |
|||
#endif |
|||
|
|||
#define E0_STEP_PIN 29 |
|||
#define E0_DIR_PIN 28 |
|||
#define E0_ENABLE_PIN 33 |
|||
#ifndef E0_CS_PIN |
|||
#define E0_CS_PIN 14 |
|||
#endif |
|||
|
|||
#define E1_STEP_PIN 22 |
|||
#define E1_DIR_PIN 24 |
|||
#define E1_ENABLE_PIN 26 |
|||
#ifndef E1_CS_PIN |
|||
#define E1_CS_PIN 15 |
|||
#endif |
|||
|
|||
#define E2_STEP_PIN 25 |
|||
#define E2_DIR_PIN 23 |
|||
#define E2_ENABLE_PIN 27 |
|||
#ifndef E2_CS_PIN |
|||
#define E2_CS_PIN 74 |
|||
#endif |
|||
|
|||
#if USES_Z_MIN_PROBE_ENDSTOP |
|||
#define Z_MIN_PROBE_PIN 49 |
|||
#endif |
|||
|
|||
#if HAS_FILAMENT_SENSOR |
|||
#ifndef FIL_RUNOUT_PIN |
|||
#define FIL_RUNOUT_PIN Y_MIN_PIN |
|||
#endif |
|||
#endif |
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN 13 |
|||
#define HEATER_1_PIN 12 |
|||
#define HEATER_2_PIN 11 |
|||
#define HEATER_BED_PIN 7 // BED H1
|
|||
|
|||
#define FAN_PIN 9 |
|||
#define FAN1_PIN 8 |
|||
#define CONTROLLER_FAN_PIN -1 |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN 0 // ANALOG A0
|
|||
#define TEMP_1_PIN 1 // ANALOG A1
|
|||
#define TEMP_2_PIN 2 // ANALOG A2
|
|||
#define TEMP_3_PIN 3 // ANALOG A3
|
|||
#define TEMP_BED_PIN 4 // ANALOG A4
|
|||
|
|||
// The thermocouple uses Analog pins
|
|||
#if ENABLED(VER_WITH_THERMOCOUPLE) // Must be defined in Configuration.h
|
|||
#define TEMP_4_PIN 5 // A5
|
|||
#define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support)
|
|||
#endif |
|||
|
|||
// SPI for Max6675 or Max31855 Thermocouple
|
|||
/*
|
|||
#if DISABLED(SDSUPPORT) |
|||
#define MAX6675_SS_PIN 53 |
|||
#else |
|||
#define MAX6675_SS_PIN 49 |
|||
#endif |
|||
*/ |
|||
|
|||
//
|
|||
// Misc. Functions
|
|||
//
|
|||
#define SDSS 4 |
|||
#define LED_PIN -1 // 13 - HEATER_0_PIN
|
|||
#define PS_ON_PIN -1 // 57
|
|||
|
|||
// MKS TFT / Nextion Use internal USART-1
|
|||
#define TFT_LCD_MODULE_COM 1 |
|||
#define TFT_LCD_MODULE_BAUDRATE 115200 |
|||
|
|||
// ESP WiFi Use internal USART-2
|
|||
#define ESP_WIFI_MODULE_COM 2 |
|||
#define ESP_WIFI_MODULE_BAUDRATE 115200 |
|||
#define ESP_WIFI_MODULE_RESET_PIN -1 |
|||
#define PIGGY_GPIO_PIN -1 |
|||
|
|||
//
|
|||
// EEPROM
|
|||
//
|
|||
#define E2END 0x7FFF // 32Kb (24lc256)
|
|||
#define I2C_EEPROM // EEPROM on I2C
|
|||
|
|||
//
|
|||
// LCD / Controller
|
|||
//
|
|||
#if HAS_SPI_LCD |
|||
|
|||
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) |
|||
|
|||
#define BEEPER_PIN 54 |
|||
#define LCD_PINS_D4 48 |
|||
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
|
|||
#define LCD_PINS_RS 55 |
|||
#define LCD_PINS_ENABLE 56 |
|||
|
|||
#elif EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER) |
|||
|
|||
#error "Pin compatibility check needed!" |
|||
#define BEEPER_PIN 54 |
|||
#define LCD_PINS_D4 48 |
|||
#define LCD_PINS_D5 -1 // 50 can't be used, it's MISO
|
|||
#define LCD_PINS_D6 -1 // 52 can't be used, it's SCK
|
|||
#define LCD_PINS_D7 53 |
|||
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
|
|||
#define LCD_PINS_RS 55 |
|||
#define LCD_PINS_ENABLE 56 |
|||
|
|||
#elif HAS_SSD1306_OLED_I2C |
|||
|
|||
#error "Pin compatibility check needed!" |
|||
#define BEEPER_PIN 54 |
|||
#define LCD_SDSS 10 |
|||
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
|
|||
|
|||
#elif ENABLED(FYSETC_MINI_12864) |
|||
|
|||
#define BEEPER_PIN 54 |
|||
#define DOGLCD_CS 56 |
|||
#define DOGLCD_A0 55 |
|||
|
|||
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
|
|||
// results in LCD soft SPI mode 3, SD soft SPI mode 0
|
|||
|
|||
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
|
|||
|
|||
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) |
|||
#error "Pin compatibility check needed!" |
|||
#ifndef RGB_LED_R_PIN |
|||
#define RGB_LED_R_PIN 50 // 50 can't be used, it's MISO
|
|||
#endif |
|||
#ifndef RGB_LED_G_PIN |
|||
#define RGB_LED_G_PIN 52 // 52 can't be used, it's SCK
|
|||
#endif |
|||
#ifndef RGB_LED_B_PIN |
|||
#define RGB_LED_B_PIN 53 |
|||
#endif |
|||
#elif ENABLED(FYSETC_MINI_12864_2_1) |
|||
#error "Pin compatibility check needed!" |
|||
#define NEOPIXEL_PIN 50 // 50 can't be used, it's MISO
|
|||
#endif |
|||
|
|||
#elif ENABLED(MKS_MINI_12864) |
|||
|
|||
#error "Pin compatibility check needed!" |
|||
#define ORIG_BEEPER_PIN 75 |
|||
|
|||
#define DOGLCD_A0 52 // 52 can't be used, it's SCK
|
|||
#define DOGLCD_CS 50 // 50 can't be used, it's MISO
|
|||
|
|||
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
|
|||
|
|||
#endif |
|||
|
|||
#if ENABLED(NEWPANEL) |
|||
#define BTN_EN1 44 |
|||
#define BTN_EN2 42 |
|||
#define BTN_ENC 40 |
|||
#endif |
|||
|
|||
#endif // HAS_SPI_LCD
|
|||
|
|||
//
|
|||
// SD Support
|
|||
//
|
|||
#ifndef SDCARD_CONNECTION |
|||
#define SDCARD_CONNECTION ONBOARD |
|||
#endif |
|||
|
|||
#if SD_CONNECTION_IS(ONBOARD) |
|||
#undef SDSS |
|||
#define SDSS 83 |
|||
#undef SD_DETECT_PIN |
|||
#define SD_DETECT_PIN 95 |
|||
#endif |
|||
Loading…
Reference in new issue