andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

[SAMD51] Remove RuRamps4D (#15264)

pull/1/head
Giuliano Zaro 5 years ago
committed by Scott Lahteine
parent
02d400e413
commit
c96844fae2
5 changed files with 1 additions and 279 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      .travis.yml
  2. 5
      Marlin/src/core/boards.h
  3. 7
      Marlin/src/pins/pins.h
  4. 259
      Marlin/src/pins/samd/pins_AGCM4_RURAMPS4D_13.h
  5. 7
      buildroot/share/tests/SAMD51_grandcentral_m4-tests

2
.travis.yml
View File

@ -16,7 +16,6 @@ env:
- TEST_PLATFORM="LPC1768" - TEST_PLATFORM="LPC1768"
- TEST_PLATFORM="LPC1769" - TEST_PLATFORM="LPC1769"
- TEST_PLATFORM="megaatmega2560" - TEST_PLATFORM="megaatmega2560"
- TEST_PLATFORM="SAMD51_grandcentral_m4"
- TEST_PLATFORM="STM32F103R" - TEST_PLATFORM="STM32F103R"
- TEST_PLATFORM="teensy31" - TEST_PLATFORM="teensy31"
- TEST_PLATFORM="teensy35" - TEST_PLATFORM="teensy35"
@ -45,6 +44,7 @@ env:
#- TEST_PLATFORM="mks_robin_lite" #- TEST_PLATFORM="mks_robin_lite"
#- TEST_PLATFORM="mks_robin_mini" #- TEST_PLATFORM="mks_robin_mini"
#- TEST_PLATFORM="mks_robin_nano" #- TEST_PLATFORM="mks_robin_nano"
#- TEST_PLATFORM="SAMD51_grandcentral_m4"
#- TEST_PLATFORM="STM32F103R_bigtree" #- TEST_PLATFORM="STM32F103R_bigtree"
#- TEST_PLATFORM="STM32F103R_fysetc" #- TEST_PLATFORM="STM32F103R_fysetc"
#- TEST_PLATFORM="STM32F4" #- TEST_PLATFORM="STM32F4"

5
Marlin/src/core/boards.h
View File

@ -307,11 +307,6 @@
// //
#define BOARD_ESP32 6000 #define BOARD_ESP32 6000
//
// SAMD51 ARM Cortex M4
//
#define BOARD_AGCM4_RURAMPS4D_13 6100
// //
// Simulations // Simulations
// //

7
Marlin/src/pins/pins.h
View File

@ -525,13 +525,6 @@
#elif MB(ESP32) #elif MB(ESP32)
#include "esp32/pins_ESP32.h" // ESP32 env:esp32 #include "esp32/pins_ESP32.h" // ESP32 env:esp32
//
// Adafruit Grand Central M4 (SAMD51 ARM Cortex-M4)
//
#elif MB(AGCM4_RURAMPS4D_13)
#include "samd/pins_AGCM4_RURAMPS4D_13.h" // SAMD51 env:SAMD51_grandcentral_m4
// //
// Linux Native Debug board // Linux Native Debug board
// //

259
Marlin/src/pins/samd/pins_AGCM4_RURAMPS4D_13.h
View File

@ -1,259 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* Adafruit Grand Central M4 pin assignments ported by Giuliano Zaro
*/
#ifndef ARDUINO_GRAND_CENTRAL_M4
#error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'"
#endif
#define BOARD_INFO_NAME "RuRAMPS4AGCM4 v1.3"
//
// Servos
//
#define SERVO0_PIN 5
#define SERVO1_PIN 3
//
// Limit Switches
//
#define X_MIN_PIN 45
#define X_MAX_PIN 39
#define Y_MIN_PIN 46
#define Y_MAX_PIN 41
#define Z_MIN_PIN 47
#define Z_MAX_PIN 43
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 49
#endif
//
// Steppers
//
#define X_STEP_PIN 37 // Support Extension Board
#define X_DIR_PIN 36
#define X_ENABLE_PIN 31
#ifndef X_CS_PIN
#define X_CS_PIN 38
#endif
#define Y_STEP_PIN 32 // Support Extension Board
#define Y_DIR_PIN 35
#define Y_ENABLE_PIN 31
#ifndef Y_CS_PIN
#define Y_CS_PIN 34
#endif
#define Z_STEP_PIN 30 // Support Extension Board
#define Z_DIR_PIN 2
#define Z_ENABLE_PIN 31
#ifndef Z_CS_PIN
#define Z_CS_PIN 10
#endif
#define E0_STEP_PIN 29
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 33
#ifndef E0_CS_PIN
#define E0_CS_PIN 14
#endif
#define E1_STEP_PIN 22
#define E1_DIR_PIN 24
#define E1_ENABLE_PIN 26
#ifndef E1_CS_PIN
#define E1_CS_PIN 15
#endif
#define E2_STEP_PIN 25
#define E2_DIR_PIN 23
#define E2_ENABLE_PIN 27
#ifndef E2_CS_PIN
#define E2_CS_PIN 74
#endif
#if USES_Z_MIN_PROBE_ENDSTOP
#define Z_MIN_PROBE_PIN 49
#endif
#if HAS_FILAMENT_SENSOR
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN Y_MIN_PIN
#endif
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 13
#define HEATER_1_PIN 12
#define HEATER_2_PIN 11
#define HEATER_BED_PIN 7 // BED H1
#define FAN_PIN 9
#define FAN1_PIN 8
#define CONTROLLER_FAN_PIN -1
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG A0
#define TEMP_1_PIN 1 // ANALOG A1
#define TEMP_2_PIN 2 // ANALOG A2
#define TEMP_3_PIN 3 // ANALOG A3
#define TEMP_BED_PIN 4 // ANALOG A4
// The thermocouple uses Analog pins
#if ENABLED(VER_WITH_THERMOCOUPLE) // Must be defined in Configuration.h
#define TEMP_4_PIN 5 // A5
#define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support)
#endif
// SPI for Max6675 or Max31855 Thermocouple
/*
#if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 53
#else
#define MAX6675_SS_PIN 49
#endif
*/
//
// Misc. Functions
//
#define SDSS 4
#define LED_PIN -1 // 13 - HEATER_0_PIN
#define PS_ON_PIN -1 // 57
// MKS TFT / Nextion Use internal USART-1
#define TFT_LCD_MODULE_COM 1
#define TFT_LCD_MODULE_BAUDRATE 115200
// ESP WiFi Use internal USART-2
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#define PIGGY_GPIO_PIN -1
//
// EEPROM
//
#define E2END 0x7FFF // 32Kb (24lc256)
#define I2C_EEPROM // EEPROM on I2C
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 54
#define LCD_PINS_D4 48
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define LCD_PINS_RS 55
#define LCD_PINS_ENABLE 56
#elif EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
#error "Pin compatibility check needed!"
#define BEEPER_PIN 54
#define LCD_PINS_D4 48
#define LCD_PINS_D5 -1 // 50 can't be used, it's MISO
#define LCD_PINS_D6 -1 // 52 can't be used, it's SCK
#define LCD_PINS_D7 53
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define LCD_PINS_RS 55
#define LCD_PINS_ENABLE 56
#elif HAS_SSD1306_OLED_I2C
#error "Pin compatibility check needed!"
#define BEEPER_PIN 54
#define LCD_SDSS 10
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#elif ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN 54
#define DOGLCD_CS 56
#define DOGLCD_A0 55
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#error "Pin compatibility check needed!"
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 50 // 50 can't be used, it's MISO
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 52 // 52 can't be used, it's SCK
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 53
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#error "Pin compatibility check needed!"
#define NEOPIXEL_PIN 50 // 50 can't be used, it's MISO
#endif
#elif ENABLED(MKS_MINI_12864)
#error "Pin compatibility check needed!"
#define ORIG_BEEPER_PIN 75
#define DOGLCD_A0 52 // 52 can't be used, it's SCK
#define DOGLCD_CS 50 // 50 can't be used, it's MISO
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#endif
#if ENABLED(NEWPANEL)
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40
#endif
#endif // HAS_SPI_LCD
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(ONBOARD)
#undef SDSS
#define SDSS 83
#undef SD_DETECT_PIN
#define SD_DETECT_PIN 95
#endif

7
buildroot/share/tests/SAMD51_grandcentral_m4-tests
View File

@ -6,12 +6,5 @@
# exit on first failure # exit on first failure
set -e set -e
#
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_AGCM4_RURAMPS4D_13
exec_test $1 $2 "Build Grand Central M4 Default Configuration"
# clean up # clean up
restore_configs restore_configs

Write Preview
Loading…
Cancel
Save