Fix indentation, whitespace, spelling, formbot pins...

Marlin/src/core/boards.h

@@ -75,7 +75,7 @@
 #define BOARD_AZTEEG_X3_PRO     68    // Azteeg X3 Pro
 #define BOARD_ULTIMAIN_2        72    // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 #define BOARD_RUMBA             80    // Rumba
-#define BOARD_FORMBOT           81    // Formbot version 1.  A Rumba derivitive
+#define BOARD_FORMBOT           81    // Formbot version 1. (A Rumba derivative)
 #define BOARD_BQ_ZUM_MEGA_3D    503   // bq ZUM Mega 3D
 #define BOARD_MAKEBOARD_MINI    431   // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
 #define BOARD_TRIGORILLA_13     343   // TriGorilla Anycubic version 1.3 based on RAMPS EFB

Marlin/src/feature/bedlevel/bedlevel.cpp

@@ -77,6 +77,8 @@ void set_bed_leveling_enabled(const bool enable/*=true*/) {
 
   if (can_change && enable != planner.leveling_active) {
 
+    planner.synchronize();
+
     #if ENABLED(MESH_BED_LEVELING)
 
       if (!enable)

Marlin/src/module/tool_change.cpp

@@ -513,7 +513,6 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
     #endif
 
     #if HAS_LEVELING
-          planner.synchronize();
       // Restore leveling to re-establish the logical position
       set_bed_leveling_enabled(leveling_was_active);
     #endif

Marlin/src/pins/pins_FORMBOT.h

@@ -35,8 +35,6 @@
 #define DEFAULT_MACHINE_NAME "Formbot"
 #define BOARD_NAME           "Formbot"
 
-#define LARGE_FLASH true
-
 //
 // Servos
 //
@@ -64,35 +62,43 @@
   #define Z_MIN_PROBE_PIN  32
 #endif
 
-#define SLED_PIN           -1
-
 //
 // Steppers
 //
 #define X_STEP_PIN         54
 #define X_DIR_PIN          55
 #define X_ENABLE_PIN       38
+#ifndef X_CS_PIN
   #define X_CS_PIN         53
+#endif
 
 #define Y_STEP_PIN         60
 #define Y_DIR_PIN          61
 #define Y_ENABLE_PIN       56
+#ifndef Y_CS_PIN
   #define Y_CS_PIN         49
+#endif
 
 #define Z_STEP_PIN         46
 #define Z_DIR_PIN          48
 #define Z_ENABLE_PIN       62
+#ifndef Z_CS_PIN
   #define Z_CS_PIN         40
+#endif
 
 #define E0_STEP_PIN        26
 #define E0_DIR_PIN         28
 #define E0_ENABLE_PIN      24
+#ifndef E0_CS_PIN
   #define E0_CS_PIN        42
+#endif
 
 #define E1_STEP_PIN        36
 #define E1_DIR_PIN         34
 #define E1_ENABLE_PIN      30
+#ifndef E1_CS_PIN
   #define E1_CS_PIN        44
+#endif
 
 #define E2_STEP_PIN        42
 #define E2_DIR_PIN         43
@@ -137,10 +143,10 @@
 #define HEATER_BED_PIN     58
 
 #define LED4_PIN            8
-#define LASER_PIN          -1
 
 #define FAN_PIN             9
-#if(!ENABLED(FilamentSensor))
+
+#if !ENABLED(FILAMENT_RUNOUT_SENSOR)
   #define FAN1_PIN          4
 #endif
 
@@ -153,25 +159,22 @@
 // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
 #define FILWIDTH_PIN        5   // Analog Input
 
+#ifndef PS_ON_PIN
   #define PS_ON_PIN        12
+#endif
 
 //
 // LCD / Controller
 //
-// Formbot boards only support the use of the REPRAP_DISCOUNT_SMART_CONTROLLER LCD Panel
+// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER
 //
-
+#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
-#if ENABLED(ULTRA_LCD)
-
   #define LCD_PINS_RS      16
   #define LCD_PINS_ENABLE  17
   #define LCD_PINS_D4      23
   #define LCD_PINS_D5      25
   #define LCD_PINS_D6      27
   #define LCD_PINS_D7      29
-
-  #if ENABLED(NEWPANEL)
-    #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
   #define BEEPER_PIN       37
   #define BTN_EN1          31
   #define BTN_EN2          33
@@ -179,6 +182,3 @@
   #define SD_DETECT_PIN    49
   #define KILL_PIN         41
 #endif
-  #endif // NEWPANEL
-
-#endif // ULTRA_LCD