Browse Source

Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory.

pull/1/head
Blair Thompson 12 years ago
parent
commit
aacbebbebe
  1. 28
      Marlin/EEPROMwrite.h
  2. 15
      Marlin/language.h
  3. 6
      Marlin/ultralcd.h
  4. 321
      Marlin/ultralcd.pde

28
Marlin/EEPROMwrite.h

@ -6,7 +6,13 @@
#include "temperature.h" #include "temperature.h"
//#include <EEPROM.h> //#include <EEPROM.h>
int plaPreheatHotendTemp;
int plaPreheatHPBTemp;
int plaPreheatFanSpeed;
int absPreheatHotendTemp;
int absPreheatHPBTemp;
int absPreheatFanSpeed;
template <class T> int EEPROM_writeAnything(int &ee, const T& value) template <class T> int EEPROM_writeAnything(int &ee, const T& value)
{ {
@ -38,7 +44,7 @@ template <class T> int EEPROM_readAnything(int &ee, T& value)
// the default values are used whenever there is a change to the data, to prevent // the default values are used whenever there is a change to the data, to prevent
// wrong data being written to the variables. // wrong data being written to the variables.
// ALSO: always make sure the variables in the Store and retrieve sections are in the same order. // ALSO: always make sure the variables in the Store and retrieve sections are in the same order.
#define EEPROM_VERSION "V06" #define EEPROM_VERSION "V07"
inline void EEPROM_StoreSettings() inline void EEPROM_StoreSettings()
{ {
@ -58,6 +64,12 @@ inline void EEPROM_StoreSettings()
EEPROM_writeAnything(i,max_z_jerk); EEPROM_writeAnything(i,max_z_jerk);
EEPROM_writeAnything(i,max_e_jerk); EEPROM_writeAnything(i,max_e_jerk);
EEPROM_writeAnything(i,add_homeing); EEPROM_writeAnything(i,add_homeing);
EEPROM_writeAnything(i,plaPreheatHotendTemp);
EEPROM_writeAnything(i,plaPreheatHPBTemp);
EEPROM_writeAnything(i,plaPreheatFanSpeed);
EEPROM_writeAnything(i,absPreheatHotendTemp);
EEPROM_writeAnything(i,absPreheatHPBTemp);
EEPROM_writeAnything(i,absPreheatFanSpeed);
#ifdef PIDTEMP #ifdef PIDTEMP
EEPROM_writeAnything(i,Kp); EEPROM_writeAnything(i,Kp);
EEPROM_writeAnything(i,Ki); EEPROM_writeAnything(i,Ki);
@ -162,6 +174,12 @@ inline void EEPROM_RetrieveSettings(bool def=false)
EEPROM_readAnything(i,max_z_jerk); EEPROM_readAnything(i,max_z_jerk);
EEPROM_readAnything(i,max_e_jerk); EEPROM_readAnything(i,max_e_jerk);
EEPROM_readAnything(i,add_homeing); EEPROM_readAnything(i,add_homeing);
EEPROM_readAnything(i,plaPreheatHotendTemp);
EEPROM_readAnything(i,plaPreheatHPBTemp);
EEPROM_readAnything(i,plaPreheatFanSpeed);
EEPROM_readAnything(i,absPreheatHotendTemp);
EEPROM_readAnything(i,absPreheatHPBTemp);
EEPROM_readAnything(i,absPreheatFanSpeed);
#ifndef PIDTEMP #ifndef PIDTEMP
float Kp,Ki,Kd; float Kp,Ki,Kd;
#endif #endif
@ -195,6 +213,14 @@ inline void EEPROM_RetrieveSettings(bool def=false)
add_homeing[0] = add_homeing[1] = add_homeing[2] = 0; add_homeing[0] = add_homeing[1] = add_homeing[2] = 0;
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLN("Using Default settings:"); SERIAL_ECHOLN("Using Default settings:");
#ifdef ULTIPANEL
plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP;
plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP;
plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED;
absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP;
absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP;
absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
#endif
} }
#ifdef EEPROM_CHITCHAT #ifdef EEPROM_CHITCHAT
EEPROM_printSettings(); EEPROM_printSettings();

15
Marlin/language.h

@ -77,6 +77,7 @@
#define MSG_MAIN_WIDE " Main \003" #define MSG_MAIN_WIDE " Main \003"
#define MSG_RECTRACT_WIDE " Rectract \x7E" #define MSG_RECTRACT_WIDE " Rectract \x7E"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E" #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_TEMPERATURE_RTN " Temperature \003"
#define MSG_MOTION_WIDE " Motion \x7E" #define MSG_MOTION_WIDE " Motion \x7E"
#define MSG_STORE_EPROM " Store memory" #define MSG_STORE_EPROM " Store memory"
#define MSG_LOAD_EPROM " Load memory" #define MSG_LOAD_EPROM " Load memory"
@ -101,14 +102,16 @@
#define MSG_KILLED "KILLED. " #define MSG_KILLED "KILLED. "
#define MSG_STOPPED "STOPPED. " #define MSG_STOPPED "STOPPED. "
#define MSG_PREHEAT_PLA " Preheat PLA" #define MSG_PREHEAT_PLA " Preheat PLA"
#define MSG_PREHEAT_PLA_SETTINGS " Preheat PLA Setting"
#define MSG_PREHEAT_ABS_SETTINGS " Preheat ABS Setting"
#define MSG_PREHEAT_ABS " Preheat ABS" #define MSG_PREHEAT_ABS " Preheat ABS"
#define MSG_STEPPER_RELEASED "Released." #define MSG_STEPPER_RELEASED "Released."
#define MSG_CONTROL_RETRACT " Retract mm:" #define MSG_CONTROL_RETRACT " Retract mm:"
#define MSG_CONTROL_RETRACTF " Retract F:" #define MSG_CONTROL_RETRACTF " Retract F:"
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
#define MSG_AUTORETRACT " AutoRetr.:" #define MSG_AUTORETRACT " AutoRetr.:"
// Serial Console Messages // Serial Console Messages

6
Marlin/ultralcd.h

@ -47,11 +47,13 @@
#endif #endif
// blocking time for recognizing a new keypress of one key, ms // blocking time for recognizing a new keypress of one key, ms
#define blocktime 500 #define blocktime 500
#define lcdslow 5 #define lcdslow 5
enum MainStatus{Main_Status, Main_Menu, Main_Prepare,Sub_PrepareMove, Main_Control, Main_SD,Sub_TempControl,Sub_MotionControl,Sub_RetractControl}; enum MainStatus{Main_Status, Main_Menu, Main_Prepare,Sub_PrepareMove, Main_Control, Main_SD,Sub_TempControl,Sub_MotionControl,Sub_RetractControl, Sub_PreheatPLASettings, Sub_PreheatABSSettings};
class MainMenu{ class MainMenu{
public: public:
@ -71,6 +73,8 @@
void showControlRetract(); void showControlRetract();
void showAxisMove(); void showAxisMove();
void showSD(); void showSD();
void showPLAsettings();
void showABSsettings();
bool force_lcd_update; bool force_lcd_update;
long lastencoderpos; long lastencoderpos;
int8_t lineoffset; int8_t lineoffset;

321
Marlin/ultralcd.pde

@ -528,17 +528,17 @@ void MainMenu::showPrepare()
MENUITEM( lcdprintPGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ; MENUITEM( lcdprintPGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
break; break;
case ItemP_preheat_pla: case ItemP_preheat_pla:
MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(PLA_PREHEAT_HOTEND_TEMP);setTargetBed(PLA_PREHEAT_HPB_TEMP); MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(plaPreheatHotendTemp);setTargetBed(plaPreheatHPBTemp);
#if FAN_PIN > -1 #if FAN_PIN > -1
FanSpeed=PLA_PREHEAT_FAN_SPEED; FanSpeed = plaPreheatFanSpeed;
analogWrite(FAN_PIN, FanSpeed); analogWrite(FAN_PIN, FanSpeed);
#endif #endif
beepshort(); ); beepshort(); );
break; break;
case ItemP_preheat_abs: case ItemP_preheat_abs:
MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(ABS_PREHEAT_HOTEND_TEMP);setTargetBed(ABS_PREHEAT_HPB_TEMP); MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(absPreheatHotendTemp);setTargetBed(absPreheatHPBTemp);
#if FAN_PIN > -1 #if FAN_PIN > -1
FanSpeed=ABS_PREHEAT_FAN_SPEED; FanSpeed = absPreheatFanSpeed;
analogWrite(FAN_PIN, FanSpeed); analogWrite(FAN_PIN, FanSpeed);
#endif #endif
beepshort(); ); beepshort(); );
@ -967,7 +967,9 @@ enum {
ItemCT_bed, ItemCT_bed,
#endif #endif
ItemCT_fan, ItemCT_fan,
ItemCT_PID_P,ItemCT_PID_I,ItemCT_PID_D,ItemCT_PID_C ItemCT_PID_P,ItemCT_PID_I,ItemCT_PID_D,ItemCT_PID_C,
ItemCT_PLA_PreHeat_Setting,
ItemCT_ABS_PreHeat_Setting,
}; };
void MainMenu::showControlTemp() void MainMenu::showControlTemp()
@ -1434,16 +1436,19 @@ void MainMenu::showControlTemp()
#endif #endif
#endif #endif
break; break;
case ItemCT_PLA_PreHeat_Setting:
MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA_SETTINGS) , BLOCK;status=Sub_PreheatPLASettings;beepshort(); ) ;
break;
case ItemCT_ABS_PreHeat_Setting:
MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS_SETTINGS) , BLOCK;status=Sub_PreheatABSSettings;beepshort(); ) ;
break;
default: default:
break; break;
} }
line++; line++;
} }
#ifdef PID_ADD_EXTRUSION_RATE
updateActiveLines(ItemCT_PID_C,encoderpos); updateActiveLines(ItemCT_ABS_PreHeat_Setting,encoderpos);
#else
updateActiveLines(ItemCT_PID_D,encoderpos);
#endif
} }
@ -2569,6 +2574,14 @@ void MainMenu::update()
{ {
showSD(); showSD();
}break; }break;
case Sub_PreheatPLASettings:
{
showPLAsettings();
}break;
case Sub_PreheatABSSettings:
{
showABSsettings();
}break;
} }
if(timeoutToStatus<millis()) if(timeoutToStatus<millis())
@ -2577,11 +2590,299 @@ void MainMenu::update()
lastencoderpos=encoderpos; lastencoderpos=encoderpos;
} }
enum {
ItemPLAPreHeat_Exit,
ItemPLAPreHeat_set_PLA_FanSpeed,
ItemPLAPreHeat_set_nozzle,
ItemPLAPreHeat_set_HPB,
ItemPLAPreHeat_Store_Eprom
};
void MainMenu::showPLAsettings()
{
#ifdef ULTIPANEL
uint8_t line=0;
clearIfNecessary();
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
{
switch(i)
{
case ItemPLAPreHeat_Exit:
MENUITEM( lcdprintPGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
break;
case ItemPLAPreHeat_set_PLA_FanSpeed:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatFanSpeed));
}
if((activeline!=line) )
break;
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=plaPreheatFanSpeed;
}
else
{
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>255) encoderpos=255;
plaPreheatFanSpeed=encoderpos;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}break;
case ItemPLAPreHeat_set_nozzle:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHotendTemp));
}
if((activeline!=line) )
break;
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=plaPreheatHotendTemp;
}
else
{
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>260) encoderpos=260;
plaPreheatHotendTemp = encoderpos;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}break;
case ItemPLAPreHeat_set_HPB:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHPBTemp));
}
if((activeline!=line) )
break;
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=plaPreheatHPBTemp;
}
else
{
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>250) encoderpos=150;
plaPreheatHPBTemp = encoderpos;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}break;
case ItemPLAPreHeat_Store_Eprom:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
}
if((activeline==line) && CLICKED)
{
//enquecommand("M84");
beepshort();
BLOCK;
EEPROM_StoreSettings();
}
}break;
default:
break;
}
line++;
}
updateActiveLines(ItemPLAPreHeat_Store_Eprom,encoderpos);
#endif
}
enum {
ItemABSPreHeat_Exit,
ItemABSPreHeat_set_FanSpeed,
ItemABSPreHeat_set_nozzle,
ItemABSPreHeat_set_HPB,
ItemABSPreHeat_Store_Eprom
};
void MainMenu::showABSsettings()
{
#ifdef ULTIPANEL
uint8_t line=0;
clearIfNecessary();
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
{
switch(i)
{
case ItemABSPreHeat_Exit:
MENUITEM( lcdprintPGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
break;
case ItemABSPreHeat_set_FanSpeed:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatFanSpeed));
}
if((activeline!=line) )
break;
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=absPreheatFanSpeed;
}
else
{
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>255) encoderpos=255;
absPreheatFanSpeed=encoderpos;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}break;
case ItemABSPreHeat_set_nozzle:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHotendTemp));
}
if((activeline!=line) )
break;
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=absPreheatHotendTemp;
}
else
{
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>260) encoderpos=260;
absPreheatHotendTemp = encoderpos;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}break;
case ItemABSPreHeat_set_HPB:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHPBTemp));
}
if((activeline!=line) )
break;
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=absPreheatHPBTemp;
}
else
{
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>250) encoderpos=150;
absPreheatHPBTemp = encoderpos;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}break;
case ItemABSPreHeat_Store_Eprom:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
}
if((activeline==line) && CLICKED)
{
//enquecommand("M84");
beepshort();
BLOCK;
EEPROM_StoreSettings();
}
}break;
default:
break;
}
line++;
}
updateActiveLines(ItemABSPreHeat_Store_Eprom,encoderpos);
#endif
}
//**********************************************************************************************************
// convert float to string with +123.4 format // convert float to string with +123.4 format
char *ftostr3(const float &x) char *ftostr3(const float &x)
{ {

Loading…
Cancel
Save