diff --git a/Marlin/EEPROMwrite.h b/Marlin/EEPROMwrite.h index 2ddd2b7de8..12674ef000 100644 --- a/Marlin/EEPROMwrite.h +++ b/Marlin/EEPROMwrite.h @@ -6,7 +6,13 @@ #include "temperature.h" //#include +int plaPreheatHotendTemp; +int plaPreheatHPBTemp; +int plaPreheatFanSpeed; +int absPreheatHotendTemp; +int absPreheatHPBTemp; +int absPreheatFanSpeed; template int EEPROM_writeAnything(int &ee, const T& value) { @@ -38,7 +44,7 @@ template int EEPROM_readAnything(int &ee, T& value) // the default values are used whenever there is a change to the data, to prevent // wrong data being written to the variables. // ALSO: always make sure the variables in the Store and retrieve sections are in the same order. -#define EEPROM_VERSION "V06" +#define EEPROM_VERSION "V07" inline void EEPROM_StoreSettings() { @@ -58,6 +64,12 @@ inline void EEPROM_StoreSettings() EEPROM_writeAnything(i,max_z_jerk); EEPROM_writeAnything(i,max_e_jerk); EEPROM_writeAnything(i,add_homeing); + EEPROM_writeAnything(i,plaPreheatHotendTemp); + EEPROM_writeAnything(i,plaPreheatHPBTemp); + EEPROM_writeAnything(i,plaPreheatFanSpeed); + EEPROM_writeAnything(i,absPreheatHotendTemp); + EEPROM_writeAnything(i,absPreheatHPBTemp); + EEPROM_writeAnything(i,absPreheatFanSpeed); #ifdef PIDTEMP EEPROM_writeAnything(i,Kp); EEPROM_writeAnything(i,Ki); @@ -162,6 +174,12 @@ inline void EEPROM_RetrieveSettings(bool def=false) EEPROM_readAnything(i,max_z_jerk); EEPROM_readAnything(i,max_e_jerk); EEPROM_readAnything(i,add_homeing); + EEPROM_readAnything(i,plaPreheatHotendTemp); + EEPROM_readAnything(i,plaPreheatHPBTemp); + EEPROM_readAnything(i,plaPreheatFanSpeed); + EEPROM_readAnything(i,absPreheatHotendTemp); + EEPROM_readAnything(i,absPreheatHPBTemp); + EEPROM_readAnything(i,absPreheatFanSpeed); #ifndef PIDTEMP float Kp,Ki,Kd; #endif @@ -195,6 +213,14 @@ inline void EEPROM_RetrieveSettings(bool def=false) add_homeing[0] = add_homeing[1] = add_homeing[2] = 0; SERIAL_ECHO_START; SERIAL_ECHOLN("Using Default settings:"); +#ifdef ULTIPANEL + plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP; + plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP; + plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED; + absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP; + absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP; + absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; +#endif } #ifdef EEPROM_CHITCHAT EEPROM_printSettings(); diff --git a/Marlin/language.h b/Marlin/language.h index 99c6751451..a3d8281594 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -77,6 +77,7 @@ #define MSG_MAIN_WIDE " Main \003" #define MSG_RECTRACT_WIDE " Rectract \x7E" #define MSG_TEMPERATURE_WIDE " Temperature \x7E" + #define MSG_TEMPERATURE_RTN " Temperature \003" #define MSG_MOTION_WIDE " Motion \x7E" #define MSG_STORE_EPROM " Store memory" #define MSG_LOAD_EPROM " Load memory" @@ -101,14 +102,16 @@ #define MSG_KILLED "KILLED. " #define MSG_STOPPED "STOPPED. " #define MSG_PREHEAT_PLA " Preheat PLA" + #define MSG_PREHEAT_PLA_SETTINGS " Preheat PLA Setting" + #define MSG_PREHEAT_ABS_SETTINGS " Preheat ABS Setting" #define MSG_PREHEAT_ABS " Preheat ABS" #define MSG_STEPPER_RELEASED "Released." - #define MSG_CONTROL_RETRACT " Retract mm:" - #define MSG_CONTROL_RETRACTF " Retract F:" - #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" - #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" - #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" - #define MSG_AUTORETRACT " AutoRetr.:" + #define MSG_CONTROL_RETRACT " Retract mm:" + #define MSG_CONTROL_RETRACTF " Retract F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" + #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" + #define MSG_AUTORETRACT " AutoRetr.:" // Serial Console Messages diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index dc44d1cda9..5bb646834f 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -46,12 +46,14 @@ #define BLOCK {blocking[BL_MI]=millis()+blocktime;blocking[BL_ST]=millis()+blocktime;} #endif + + // blocking time for recognizing a new keypress of one key, ms #define blocktime 500 #define lcdslow 5 - enum MainStatus{Main_Status, Main_Menu, Main_Prepare,Sub_PrepareMove, Main_Control, Main_SD,Sub_TempControl,Sub_MotionControl,Sub_RetractControl}; + enum MainStatus{Main_Status, Main_Menu, Main_Prepare,Sub_PrepareMove, Main_Control, Main_SD,Sub_TempControl,Sub_MotionControl,Sub_RetractControl, Sub_PreheatPLASettings, Sub_PreheatABSSettings}; class MainMenu{ public: @@ -71,6 +73,8 @@ void showControlRetract(); void showAxisMove(); void showSD(); + void showPLAsettings(); + void showABSsettings(); bool force_lcd_update; long lastencoderpos; int8_t lineoffset; diff --git a/Marlin/ultralcd.pde b/Marlin/ultralcd.pde index 98d9f4bc86..e050c6125d 100644 --- a/Marlin/ultralcd.pde +++ b/Marlin/ultralcd.pde @@ -528,17 +528,17 @@ void MainMenu::showPrepare() MENUITEM( lcdprintPGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ; break; case ItemP_preheat_pla: - MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(PLA_PREHEAT_HOTEND_TEMP);setTargetBed(PLA_PREHEAT_HPB_TEMP); + MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(plaPreheatHotendTemp);setTargetBed(plaPreheatHPBTemp); #if FAN_PIN > -1 - FanSpeed=PLA_PREHEAT_FAN_SPEED; + FanSpeed = plaPreheatFanSpeed; analogWrite(FAN_PIN, FanSpeed); #endif beepshort(); ); break; case ItemP_preheat_abs: - MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(ABS_PREHEAT_HOTEND_TEMP);setTargetBed(ABS_PREHEAT_HPB_TEMP); + MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(absPreheatHotendTemp);setTargetBed(absPreheatHPBTemp); #if FAN_PIN > -1 - FanSpeed=ABS_PREHEAT_FAN_SPEED; + FanSpeed = absPreheatFanSpeed; analogWrite(FAN_PIN, FanSpeed); #endif beepshort(); ); @@ -789,7 +789,7 @@ void MainMenu::showTune() { lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE); lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0()))); - } + } if((activeline!=line) ) break; @@ -967,7 +967,9 @@ enum { ItemCT_bed, #endif ItemCT_fan, - ItemCT_PID_P,ItemCT_PID_I,ItemCT_PID_D,ItemCT_PID_C + ItemCT_PID_P,ItemCT_PID_I,ItemCT_PID_D,ItemCT_PID_C, + ItemCT_PLA_PreHeat_Setting, + ItemCT_ABS_PreHeat_Setting, }; void MainMenu::showControlTemp() @@ -1434,16 +1436,19 @@ void MainMenu::showControlTemp() #endif #endif break; + case ItemCT_PLA_PreHeat_Setting: + MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA_SETTINGS) , BLOCK;status=Sub_PreheatPLASettings;beepshort(); ) ; + break; + case ItemCT_ABS_PreHeat_Setting: + MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS_SETTINGS) , BLOCK;status=Sub_PreheatABSSettings;beepshort(); ) ; + break; default: break; } line++; } - #ifdef PID_ADD_EXTRUSION_RATE - updateActiveLines(ItemCT_PID_C,encoderpos); - #else - updateActiveLines(ItemCT_PID_D,encoderpos); - #endif + + updateActiveLines(ItemCT_ABS_PreHeat_Setting,encoderpos); } @@ -2569,6 +2574,14 @@ void MainMenu::update() { showSD(); }break; + case Sub_PreheatPLASettings: + { + showPLAsettings(); + }break; + case Sub_PreheatABSSettings: + { + showABSsettings(); + }break; } if(timeoutToStatus255) encoderpos=255; + plaPreheatFanSpeed=encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + case ItemPLAPreHeat_set_nozzle: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE); + lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHotendTemp)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=plaPreheatHotendTemp; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + plaPreheatHotendTemp = encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + case ItemPLAPreHeat_set_HPB: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_BED); + lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHPBTemp)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=plaPreheatHPBTemp; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>250) encoderpos=150; + plaPreheatHPBTemp = encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + case ItemPLAPreHeat_Store_Eprom: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM); + } + if((activeline==line) && CLICKED) + { + //enquecommand("M84"); + beepshort(); + BLOCK; + EEPROM_StoreSettings(); + } + }break; + default: + break; + } + line++; + } + updateActiveLines(ItemPLAPreHeat_Store_Eprom,encoderpos); +#endif +} + +enum { + ItemABSPreHeat_Exit, + ItemABSPreHeat_set_FanSpeed, + ItemABSPreHeat_set_nozzle, + ItemABSPreHeat_set_HPB, + ItemABSPreHeat_Store_Eprom + }; + +void MainMenu::showABSsettings() +{ +#ifdef ULTIPANEL + uint8_t line=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i255) encoderpos=255; + absPreheatFanSpeed=encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + + case ItemABSPreHeat_set_nozzle: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE); + lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHotendTemp)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=absPreheatHotendTemp; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + absPreheatHotendTemp = encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + + case ItemABSPreHeat_set_HPB: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_BED); + lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHPBTemp)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=absPreheatHPBTemp; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>250) encoderpos=150; + absPreheatHPBTemp = encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + case ItemABSPreHeat_Store_Eprom: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM); + } + if((activeline==line) && CLICKED) + { + //enquecommand("M84"); + beepshort(); + BLOCK; + EEPROM_StoreSettings(); + } + }break; + default: + break; + } + line++; + } + updateActiveLines(ItemABSPreHeat_Store_Eprom,encoderpos); +#endif +} +//********************************************************************************************************** // convert float to string with +123.4 format char *ftostr3(const float &x) {