Witbox and Hephestos are just RAMPS_13_EFB

Marlin/boards.h

@@ -51,8 +51,6 @@
 #define BOARD_5DPRINT           88   // 5DPrint D8 Driver Board
 #define BOARD_LEAPFROG          999  // Leapfrog
 #define BOARD_MKS_BASE          40   // MKS BASE 1.0
-#define BOARD_WITBOX            41   // bq WITBOX
-#define BOARD_HEPHESTOS         42   // bq Prusa i3 Hephestos
 #define BOARD_BAM_DICE          401  // 2PrintBeta BAM&DICE with STK drivers
 #define BOARD_BAM_DICE_DUE      402  // 2PrintBeta BAM&DICE Due with STK drivers
 

Marlin/example_configurations/Hephestos/Configuration.h

@@ -57,11 +57,14 @@ Here are some standard links for getting your machine calibrated:
 
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
-#define MOTHERBOARD BOARD_HEPHESTOS
+#define MOTHERBOARD BOARD_RAMPS_13_EFB
 
 // Optional custom name for your RepStrap or other custom machine
 // Displayed in the LCD "Ready" message
-// #define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "HEPHESTOS"
+
+// Added for BQ
+#define FIRMWARE_URL "http://www.bq.com/gb/downloads-prusa-i3-hephestos.html"
  
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)

Marlin/example_configurations/WITBOX/Configuration.h

@@ -57,11 +57,14 @@ Here are some standard links for getting your machine calibrated:
 
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
-#define MOTHERBOARD BOARD_WITBOX
+#define MOTHERBOARD BOARD_RAMPS_13_EFB
 
 // Optional custom name for your RepStrap or other custom machine
 // Displayed in the LCD "Ready" message
-// #define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "WITBOX"
+
+// Added for BQ
+#define FIRMWARE_URL "http://www.bq.com/gb/downloads-witbox.html"
 
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)

Marlin/language.h

@@ -59,21 +59,8 @@
 #elif MB(SAV_MKI)
   #define MACHINE_NAME "SAV MkI"
   #define FIRMWARE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
-#elif MB(WITBOX)
-  #define MACHINE_NAME "WITBOX"
-  #define FIRMWARE_URL "http://www.bq.com/gb/downloads-witbox.html"
-#elif MB(HEPHESTOS)
-  #define MACHINE_NAME "HEPHESTOS"
-  #define FIRMWARE_URL "http://www.bq.com/gb/downloads-prusa-i3-hephestos.html"
-#elif MB(BRAINWAVE_PRO)
-  #define MACHINE_NAME "Kossel Pro"
-  #ifndef FIRMWARE_URL
-    #define FIRMWARE_URL "https://github.com/OpenBeamUSA/Marlin/"
-  #endif
-#else
-  #ifndef MACHINE_NAME
+#elif !defined(MACHINE_NAME)
   #define MACHINE_NAME "3D Printer"
-  #endif
 #endif
 
 #ifdef CUSTOM_MENDEL_NAME

Marlin/pins.h

@@ -104,10 +104,6 @@
   #include "pins_5DPRINT.h"
 #elif MB(LEAPFROG)
   #include "pins_LEAPFROG.h"
-#elif MB(WITBOX)
-  #include "pins_WITBOX.h"
-#elif MB(HEPHESTOS)
-  #include "pins_HEPHESTOS.h"
 #elif MB(BAM_DICE)
   #include "pins_RAMPS_13.h"
 #elif MB(BAM_DICE_DUE)

Marlin/pins_HEPHESTOS.h

@@ -1,11 +0,0 @@
-/**
- * bq Prusa i3 Hephestos – Arduino Mega with RAMPS v1.3/1.4 pin assignments
- */
-
-#include "pins_RAMPS_13.h"
-
-#undef FAN_PIN
-#define FAN_PIN             9 // (Sprinter config)
-
-#undef HEATER_1_PIN
-#define HEATER_1_PIN       -1

Marlin/pins_WITBOX.h

@@ -1,11 +0,0 @@
-/**
- * bq WITBOX Arduino Mega with RAMPS v1.3/1.4 pin assignments
- */
-
-#include "pins_RAMPS_13.h"
-
-#undef FAN_PIN
-#define FAN_PIN             9 // (Sprinter config)
-
-#undef HEATER_1_PIN
-#define HEATER_1_PIN       -1