andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE (#13717)

pull/1/head
Bob Kuhn 6 years ago
committed by Scott Lahteine
parent
9992c424f5
commit
9b578ca343
6 changed files with 140 additions and 23 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 68
      Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
  2. 2
      Marlin/src/inc/Conditionals_LCD.h
  3. 6
      Marlin/src/lcd/dogm/ultralcd_DOGM.h
  4. 35
      Marlin/src/pins/pins_MKS_SBASE.h
  5. 5
      Marlin/src/pins/pins_RAMPS_FD_V1.h
  6. 41
      Marlin/src/pins/pins_RAMPS_RE_ARM.h

68
Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
View File

@ -65,10 +65,76 @@
#undef SPI_SPEED #undef SPI_SPEED
#define SPI_SPEED 2 // About 2 MHz #define SPI_SPEED 2 // About 2 MHz
#include <algorithm>
#include <LPC17xx.h>
#include <gpio.h>
#include <Arduino.h>
uint8_t swSpiTransfer_mode_0(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) {
for (uint8_t i = 0; i < 8; i++) {
if (spi_speed == 0) {
gpio_set(mosi_pin, !!(b & 0x80));
gpio_set(sck_pin, HIGH);
b <<= 1;
if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
gpio_set(sck_pin, LOW);
}
else {
const uint8_t state = (b & 0x80) ? HIGH : LOW;
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(mosi_pin, state);
for (uint8_t j = 0; j < spi_speed + (miso_pin >= 0 ? 0 : 1); j++)
gpio_set(sck_pin, HIGH);
b <<= 1;
if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(sck_pin, LOW);
}
}
return b;
}
uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) {
for (uint8_t i = 0; i < 8; i++) {
const uint8_t state = (b & 0x80) ? HIGH : LOW;
if (spi_speed == 0) {
gpio_set(sck_pin, LOW);
gpio_set(mosi_pin, state);
gpio_set(mosi_pin, state); // need some setup time
gpio_set(sck_pin, HIGH);
}
else {
for (uint8_t j = 0; j < spi_speed + (miso_pin >= 0 ? 0 : 1); j++)
gpio_set(sck_pin, LOW);
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(mosi_pin, state);
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(sck_pin, HIGH);
}
b <<= 1;
if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
}
return b;
}
static uint8_t SPI_speed = 0; static uint8_t SPI_speed = 0;
static void u8g_sw_spi_HAL_LPC1768_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) { static void u8g_sw_spi_HAL_LPC1768_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) {
swSpiTransfer(val, SPI_speed, clockPin, -1, dataPin); #if ENABLED(FYSETC_MINI_12864)
swSpiTransfer_mode_3(val, SPI_speed, clockPin, -1, dataPin);
#else
swSpiTransfer_mode_0(val, SPI_speed, clockPin, -1, dataPin);
#endif
} }
uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) { uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {

2
Marlin/src/inc/Conditionals_LCD.h
View File

@ -143,6 +143,8 @@
#define DOGLCD #define DOGLCD
#define ULTIPANEL #define ULTIPANEL
#define LCD_CONTRAST_MIN 0
#define LCD_CONTRAST_MAX 255
#define DEFAULT_LCD_CONTRAST 255 #define DEFAULT_LCD_CONTRAST 255
#define LED_COLORS_REDUCE_GREEN #define LED_COLORS_REDUCE_GREEN

6
Marlin/src/lcd/dogm/ultralcd_DOGM.h
View File

@ -112,7 +112,11 @@
//#define U8G_CLASS U8GLIB_MINI12864 //#define U8G_CLASS U8GLIB_MINI12864
//#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 8 stripes //#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 8 stripes
#define U8G_CLASS U8GLIB_MINI12864_2X #define U8G_CLASS U8GLIB_MINI12864_2X
#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes #if EITHER(FYSETC_MINI_12864, TARGET_LPC1768)
#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 4 stripes SW-SPI
#else
#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes HW-SPI
#endif
#elif ENABLED(U8GLIB_SH1106_EINSTART) #elif ENABLED(U8GLIB_SH1106_EINSTART)
// Connected via motherboard header // Connected via motherboard header
#define U8G_CLASS U8GLIB_SH1106_128X64 #define U8G_CLASS U8GLIB_SH1106_128X64

35
Marlin/src/pins/pins_MKS_SBASE.h
View File

@ -253,6 +253,41 @@
#define DOGLCD_SCK SCK_PIN #define DOGLCD_SCK SCK_PIN
#define DOGLCD_MOSI MOSI_PIN #define DOGLCD_MOSI MOSI_PIN
#endif #endif
#if ENABLED(FYSETC_MINI_12864)
/**
* The Fysetc display can NOT use the SCK and MOSI pins on EXP2, so a
* special cable is needed to go between EXP2 on the FYSETC and the
* controller board's EXP2 and J8. It also means that a software SPI
* is needed to drive those pins.
*
* The Fysetc requires mode 3 SPI interface.
*
* Pins 6, 7 & 8 on EXP2 are no connects. That means a second special
* cable will be needed if the RGB LEDs are to be active.
*/
#define DOGLCD_CS LCD_PINS_ENABLE // EXP1.3 (LCD_EN on Fysetc schematic)
#define DOGLCD_A0 LCD_PINS_RS // EXP1.4 (LCD_A0 on Fysetc schematic)
#define DOGLCD_SCK P2_11 // J8-5 (SCK on Fysetc schematic)
#define DOGLCD_MOSI P4_28 // J8-6 (MOSI on Fysetc schematic)
#define RGB_LED
//#define RGBW_LED
#if EITHER(RGB_LED, RGBW_LED)
#define RGB_LED_R_PIN P2_12 // J8-4 (LCD_D6 on Fysetc schematic)
#define RGB_LED_G_PIN P1_23 // J8-3 (LCD_D5 on Fysetc schematic)
#define RGB_LED_B_PIN P1_22 // J8-2 (LCD_D7 on Fysetc schematic)
//#define RGB_LED_W_PIN -1
#endif
#elif ENABLED(MINIPANEL)
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#endif
#endif #endif
/** /**

5
Marlin/src/pins/pins_RAMPS_FD_V1.h
View File

@ -156,7 +156,10 @@
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
#endif #endif
#if ENABLED(MINIPANEL) #if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS LCD_PINS_ENABLE
#define DOGLCD_A0 LCD_PINS_RS
#elif ENABLED(MINIPANEL)
#define DOGLCD_CS 25 #define DOGLCD_CS 25
#define DOGLCD_A0 27 #define DOGLCD_A0 27
#endif #endif

41
Marlin/src/pins/pins_RAMPS_RE_ARM.h
View File

@ -269,11 +269,21 @@
#elif ENABLED(ULTRA_LCD) #elif ENABLED(ULTRA_LCD)
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
#if ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN P1_01
#define BTN_ENC P1_04
#else
#define BEEPER_PIN P1_30 // (37) not 5V tolerant #define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#endif
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) #define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4 #define KILL_PIN P1_22 // (41) J5-4 & AUX-4
@ -296,13 +306,6 @@
#if ANY(VIKI2, miniVIKI) #if ANY(VIKI2, miniVIKI)
// #define LCD_SCREEN_ROT_180 // #define LCD_SCREEN_ROT_180
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
#define DOGLCD_CS P0_16 // (16) #define DOGLCD_CS P0_16 // (16)
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_SCK SCK_PIN #define DOGLCD_SCK SCK_PIN
@ -311,8 +314,17 @@
#define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes #define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
#else #else
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define DOGLCD_CS P1_09 // use Ethernet connector for EXP1 cable signals
#define DOGLCD_A0 P1_14
#else
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#endif
#define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers #define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
@ -323,11 +335,6 @@
#endif #endif
#endif #endif
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
#if ENABLED(MINIPANEL) #if ENABLED(MINIPANEL)
// GLCD features // GLCD features
// Uncomment screen orientation // Uncomment screen orientation
@ -362,10 +369,10 @@
#if ENABLED(LPC_SD_LCD) #if ENABLED(LPC_SD_LCD)
#define SCK_PIN P0_15 #define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_17 #define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_18 #define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // Chip select for SD card used by Marlin #define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
#elif ENABLED(LPC_SD_ONBOARD) #elif ENABLED(LPC_SD_ONBOARD)

Write Preview
Loading…
Cancel
Save