You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
150 lines
4.6 KiB
150 lines
4.6 KiB
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
#ifndef STM32F4
|
|
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
|
|
#endif
|
|
|
|
#ifndef MACHINE_NAME
|
|
#define MACHINE_NAME "STEVAL-3DP001V1"
|
|
#endif
|
|
|
|
#undef TEMP_TIMER
|
|
#define TEMP_TIMER 9 // the Marlin default of timer 7 doesn't exist on the STM32MF401 series
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN 38 // PD8 X_STOP
|
|
#define X_MAX_PIN -1
|
|
#define Y_MIN_PIN 39 // PD9 Y_STOP
|
|
#define Y_MAX_PIN -1
|
|
#define Z_MIN_PIN 40 // PD10 Z_STOP
|
|
#define Z_MAX_PIN -1
|
|
|
|
//
|
|
// Z Probe (when not Z_MIN_PIN)
|
|
//
|
|
// #ifndef Z_MIN_PROBE_PIN
|
|
// #define Z_MIN_PROBE_PIN 11 // PA4
|
|
// #endif
|
|
|
|
#define SCK_PIN 16 // PB13 SPI_S
|
|
#define MISO_PIN 17 // PB14 SPI_M
|
|
#define MOSI_PIN 18 // PB15 SPI_M
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
|
|
#define X_STEP_PIN 60 // PE14 X_PWM
|
|
#define X_DIR_PIN 61 // PE15 X_DIR
|
|
#define X_ENABLE_PIN 59 // PE13 X_RES
|
|
#define X_CS_PIN 11 // PA4 SPI_CS
|
|
|
|
#define Y_STEP_PIN 62 // PB10 Y_PWM
|
|
#define Y_DIR_PIN 63 // PE9 Y_DIR
|
|
#define Y_ENABLE_PIN 64 // PE10 Y_RES
|
|
#define Y_CS_PIN 11 // PA4 SPI_CS
|
|
|
|
#define Z_STEP_PIN 66 // PC6 Z_PWM
|
|
#define Z_DIR_PIN 67 // PC0 Z_DIR
|
|
#define Z_ENABLE_PIN 65 // PC15 Z_RES
|
|
#define Z_CS_PIN 11 // PA4 SPI_CS
|
|
|
|
#define E0_STEP_PIN 70 // PD12 E1_PW
|
|
#define E0_DIR_PIN 68 // PC13 E1_DIR
|
|
#define E0_ENABLE_PIN 69 // PC14 E1_RE
|
|
#define E0_CS_PIN 11 // PA4 SPI_CS
|
|
|
|
#define E1_STEP_PIN 72 // PE5 E2_PWM
|
|
#define E1_DIR_PIN 73 // PE6 E2_DIR
|
|
#define E1_ENABLE_PIN 71 // PE4 E2_RESE
|
|
#define E1_CS_PIN 11 // PA4 SPI_CS
|
|
|
|
#define E2_STEP_PIN 76 // PB8 E3_PWM
|
|
#define E2_DIR_PIN 74 // PE2 E3_DIR
|
|
#define E2_ENABLE_PIN 75 // PE3 E3_RESE
|
|
#define E2_CS_PIN 11 // PA4 SPI_CS
|
|
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN 52 // PA0 E1_THER
|
|
#define TEMP_1_PIN 53 // PA1 E2_THER
|
|
#define TEMP_BED_PIN 50 // PC2 BED_THE
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 52 // PA0 E1_THER
|
|
#define HEATER_1_PIN 53 // PA1 E2_THER
|
|
#define HEATER_BED_PIN 50 // PC2 BED_THE
|
|
|
|
#define FAN_PIN 56 // PC4 E1_FAN PWM pin, Part cooling fan
|
|
#define FAN1_PIN 57 // PC5 E2_FAN PWM pin, Extruder fan
|
|
#define FAN2_PIN 58 // PE8 E3_FAN PWM pin, Controller fan
|
|
|
|
//
|
|
// Misc functions
|
|
//
|
|
#define SDSS 11 // PA4 SPI_CS
|
|
#define LED_PIN -1 // Heart beat
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
#define PWR_LOSS -1 // Power loss / nAC_FAULT
|
|
|
|
//
|
|
// LCD / Controller
|
|
//
|
|
//#define SD_DETECT_PIN 24 // PA15 SD_CA
|
|
//#define BEEPER_PIN 23 // PC9 SDIO_D1
|
|
//#define LCD_PINS_RS 63 // PE9 Y_DIR
|
|
//#define LCD_PINS_ENABLE 58 // PE8 E3_FAN
|
|
//#define LCD_PINS_D4 15 // PB12 SPI_C
|
|
//#define LCD_PINS_D5 16 // PB13 SPI_S
|
|
//#define LCD_PINS_D6 17 // PB14 SPI_M
|
|
//#define LCD_PINS_D7 18 // PB15 SPI_M
|
|
//#define BTN_EN1 56 // PC4 E1_FAN
|
|
//#define BTN_EN2 57 // PC5 E2_FAN
|
|
//#define BTN_ENC 51 // PC3 BED_THE
|
|
|
|
//
|
|
// Filament runout detection
|
|
//
|
|
//#define FIL_RUNOUT_PIN 55 // PA3 BED_THE
|
|
|
|
//
|
|
// Extension pins
|
|
//
|
|
//#define EXT0_PIN 48 // PB0 E2_HEAT
|
|
//#define EXT1_PIN 49 // PB1 E3_HEAT
|
|
//#define EXT2_PIN // PB2
|
|
//#define EXT3_PIN 38 // PD8 X_STOP
|
|
//#define EXT4_PIN 39 // PD9 Y_STOP
|
|
//#define EXT5_PIN 40 // PD10 Z_STOP
|
|
//#define EXT6_PIN 41 // PD11
|
|
//#define EXT7_PIN 70 // PD12 E1_PW
|
|
//#define EXT8_PIN 62 // PB10 Y_PWM
|
|
//#define EXT9_PIN // PB11
|
|
|