andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Актуализация конфига

pull/4/head
Sergey 4 years ago
parent
145d165ebb
commit
5d9e1e7f87
9 changed files with 38 additions and 108 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 48
      Marlin/Configuration.h
  2. 11
      Marlin/Configuration_adv.h
  3. 46
      Marlin/src/HAL/STM32/inc/SanityCheck.h
  4. 0
      Marlin/src/HAL/STM32F1/build_flags.py
  5. 13
      Marlin/src/gcode/gcode.cpp
  6. 1
      Marlin/src/gcode/queue.cpp
  7. 1
      Marlin/src/gcode/temp/M105.cpp
  8. 23
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
  9. 1
      platformio.ini

48
Marlin/Configuration.h
View File

@ -74,7 +74,6 @@
#define STRING_CONFIG_H_AUTHOR "(Sergey, FlyingbearGhost4S)" // Who made the changes.
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
/**
* *** VENDORS PLEASE READ ***
*
@ -486,13 +485,8 @@
#if ENABLED(PIDTEMP)
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
// Set/get with gcode: M301 E[extruder number, 0-2]
//#define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
@ -765,7 +759,7 @@
* Override with M92
* X, Y, Z, E0 [, E1[, E2...]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 400 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 421 }
/**
* Default Max Feed Rate (mm/s)
@ -1072,7 +1066,7 @@
*/
//#define PROBING_HEATERS_OFF // Turn heaters off when probing
#if ENABLED(PROBING_HEATERS_OFF)
#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
//#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
#endif
//#define PROBING_FANS_OFF // Turn fans off when probing
//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
@ -1346,7 +1340,7 @@
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
#define MESH_INSET 20 // Set Mesh bounds as an inset region of the bed
#define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
@ -1362,7 +1356,7 @@
//=================================== Mesh ==================================
//===========================================================================
#define MESH_INSET 20 // Set Mesh bounds as an inset region of the bed
#define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
#define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
@ -1421,8 +1415,8 @@
#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
#define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing
#define Z_SAFE_HOMING_X_POINT (0) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT (0) // Y point for Z homing when homing all axes (G28).
#endif
// Homing speeds (mm/m)
@ -2230,36 +2224,6 @@ EEPROM_W25Q
#define FSMC_UPSCALE 3 //3x upscaler for 480x320 displays
#endif
//
// TFT LVGL UI
//
// Using default MKS icons and fonts from: https://git.io/JJvzK
// Just copy the 'assets' folder from the build directory to the
// root of your SD card, together with the compiled firmware.
//
//#define TFT_LVGL_UI_FSMC // Robin nano v1.2 uses FSMC
//#define TFT_LVGL_UI_SPI // Robin nano v2.0 uses SPI
//
// Anycubic Mega TFT (AI3M)
//
//#define ANYCUBIC_TFT_MODEL
//#define ANYCUBIC_TFT_DEBUG
//
// TFT LVGL UI
//
// Using default MKS icons and fonts from: https://git.io/JJvzK
// Just copy the 'assets' folder from the build directory to the
// root of your SD card, together with the compiled firmware.
//
//#define TFT_LVGL_UI_FSMC // Robin nano v1.2 uses FSMC
//#define TFT_LVGL_UI_SPI // Robin nano v2.0 uses SPI
//
// Anycubic Mega TFT (AI3M)
//
//#define ANYCUBIC_TFT_MODEL
//#define ANYCUBIC_TFT_DEBUG
//
// TFT LVGL UI

11
Marlin/Configuration_adv.h
View File

@ -1150,8 +1150,8 @@
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
#define POWER_LOSS_PIN PWR_DET_PIN // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
#define POWER_LOSS_STATE LOW // State of pin indicating power loss
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
//#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
@ -2406,8 +2406,7 @@
*/
#define STEALTHCHOP_XY
#define STEALTHCHOP_Z
// @efim-a-efim: Vendor recommends disabling stealthchop on extruder
// #define STEALTHCHOP_E
#define STEALTHCHOP_E
/**
* Optimize spreadCycle chopper parameters by using predefined parameter sets
@ -2437,7 +2436,7 @@
* M912 - Clear stepper driver overtemperature pre-warn condition flag.
* M122 - Report driver parameters (Requires TMC_DEBUG)
*/
//#define MONITOR_DRIVER_STATUS
#define MONITOR_DRIVER_STATUS
#if ENABLED(MONITOR_DRIVER_STATUS)
#define CURRENT_STEP_DOWN 50 // [mA]
@ -2532,7 +2531,7 @@
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.
*/
//#define TMC_DEBUG
#define TMC_DEBUG
/**
* You can set your own advanced settings by filling in predefined functions.

46
Marlin/src/HAL/STM32/inc/SanityCheck.h
View File

@ -54,49 +54,3 @@
#elif ENABLED(SERIAL_STATS_DROPPED_RX)
#error "SERIAL_STATS_DROPPED_RX is not supported on this platform."
#endif
#if ENABLED(SDCARD_EEPROM_EMULATION) && DISABLED(SDSUPPORT)
#undef SDCARD_EEPROM_EMULATION // Avoid additional error noise
#if USE_FALLBACK_EEPROM
#warning "EEPROM type not specified. Fallback is SDCARD_EEPROM_EMULATION."
#endif
#error "SDCARD_EEPROM_EMULATION requires SDSUPPORT. Enable SDSUPPORT or choose another EEPROM emulation."
#endif
#if defined(STM32F4xx) && BOTH(PRINTCOUNTER, FLASH_EEPROM_EMULATION)
#warning "FLASH_EEPROM_EMULATION may cause long delays when writing and should not be used while printing."
#error "Disable PRINTCOUNTER or choose another EEPROM emulation."
#endif
#if !defined(STM32F4xx) && ENABLED(FLASH_EEPROM_LEVELING)
#error "FLASH_EEPROM_LEVELING is currently only supported on STM32F4 hardware."
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on this platform."
#elif ENABLED(SERIAL_STATS_DROPPED_RX)
#error "SERIAL_STATS_DROPPED_RX is not supported on this platform."
#endif
#if ENABLED(SDCARD_EEPROM_EMULATION) && DISABLED(SDSUPPORT)
#undef SDCARD_EEPROM_EMULATION // Avoid additional error noise
#if USE_FALLBACK_EEPROM
#warning "EEPROM type not specified. Fallback is SDCARD_EEPROM_EMULATION."
#endif
#error "SDCARD_EEPROM_EMULATION requires SDSUPPORT. Enable SDSUPPORT or choose another EEPROM emulation."
#endif
#if defined(STM32F4xx) && BOTH(PRINTCOUNTER, FLASH_EEPROM_EMULATION)
#warning "FLASH_EEPROM_EMULATION may cause long delays when writing and should not be used while printing."
#error "Disable PRINTCOUNTER or choose another EEPROM emulation."
#endif
#if !defined(STM32F4xx) && ENABLED(FLASH_EEPROM_LEVELING)
#error "FLASH_EEPROM_LEVELING is currently only supported on STM32F4 hardware."
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on this platform."
#elif ENABLED(SERIAL_STATS_DROPPED_RX)
#error "SERIAL_STATS_DROPPED_RX is not supported on this platform."
#endif

0
Marlin/src/HAL/STM32F1/build_flags.py
View File

13
Marlin/src/gcode/gcode.cpp
View File

@ -444,18 +444,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 24: M24(); break; // M24: Start SD print
case 25: M25(); break; // M25: Pause SD print
case 26: M26(); break; // M26: Set SD index
case 27:
// #if ENABLED(MKS_WIFI)
// if(!serial_port_index){
M27();
// }else{
// mks_m27();
// return;
// }
// #else
// M27();
// #endif
break; // M27: Get SD status
case 27: M27(); break; // M27: Get SD status
case 28: M28(); break; // M28: Start SD write
case 29: M29(); break; // M29: Stop SD write
case 30:

1
Marlin/src/gcode/queue.cpp
View File

@ -466,6 +466,7 @@ void GCodeQueue::get_serial_commands() {
#endif
if (ISEOL(serial_char)) {
// Reset our state, continue if the line was empty
if (process_line_done(serial_input_state[i], serial_line_buffer[i], serial_count[i]))
continue;

1
Marlin/src/gcode/temp/M105.cpp
View File

@ -31,7 +31,6 @@ void GcodeSuite::M105() {
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
SERIAL_ECHOPGM(STR_OK);
#if HAS_TEMP_SENSOR

23
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
View File

@ -181,3 +181,26 @@ BlTouch
#define W25QXX_SCK_PIN PB13
#endif
#if HAS_TMC220x
/**
* TMC2208/TMC2209 stepper drivers
*/
//
// Software serial
//
// #define X_SERIAL_TX_PIN PC7
// #define X_SERIAL_RX_PIN PC7
// #define Y_SERIAL_TX_PIN PD2
// #define Y_SERIAL_RX_PIN PD2
// #define Z_SERIAL_TX_PIN PC12
// #define Z_SERIAL_RX_PIN PC12
#define E0_SERIAL_TX_PIN PA6
#define E0_SERIAL_RX_PIN PA6
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif

1
platformio.ini
View File

@ -630,6 +630,7 @@ extra_scripts = ${common.extra_scripts}
[env:trigorilla_pro]
platform = ${common_stm32f1.platform}
extends = env:mks_robin
extra_scripts = ${common.extra_scripts}
#
# MKS Robin E3D (STM32F103RCT6) and

Write Preview
Loading…
Cancel
Save