Browse Source

Configurable Corner Leveling point order (#20733)

vanilla_fb_2.0.x
RFBomb 4 years ago
committed by Scott Lahteine
parent
commit
418524b1be
  1. 19
      Marlin/Configuration.h
  2. 2
      Marlin/src/lcd/language/language_en.h
  3. 159
      Marlin/src/lcd/menu/menu_bed_corners.cpp
  4. 6
      buildroot/tests/rambo-tests

19
Marlin/Configuration.h

@ -1451,6 +1451,25 @@
#define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify
//#define LEVEL_CORNERS_AUDIO_FEEDBACK //#define LEVEL_CORNERS_AUDIO_FEEDBACK
#endif #endif
/**
* Corner Leveling Order
*
* Set 2 or 4 points. When 2 points are given, the 3rd is the center of the opposite edge.
*
* LF Left-Front RF Right-Front
* LB Left-Back RB Right-Back
*
* Examples:
*
* Default {LF,RB,LB,RF} {LF,RF} {LB,LF}
* LB --------- RB LB --------- RB LB --------- RB LB --------- RB
* | 4 3 | | 3 2 | | <3> | | 1 |
* | | | | | | | <3>|
* | 1 2 | | 1 4 | | 1 2 | | 2 |
* LF --------- RF LF --------- RF LF --------- RF LF --------- RF
*/
#define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB }
#endif #endif
/** /**

2
Marlin/src/lcd/language/language_en.h

@ -130,6 +130,8 @@ namespace Language_en {
PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT("Level Corners"); PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT("Level Corners");
PROGMEM Language_Str MSG_LEVEL_CORNERS_RAISE = _UxGT("Raise Bed Until Probe Triggered"); PROGMEM Language_Str MSG_LEVEL_CORNERS_RAISE = _UxGT("Raise Bed Until Probe Triggered");
PROGMEM Language_Str MSG_LEVEL_CORNERS_IN_RANGE = _UxGT("All Corners Within Tolerance. Level Bed"); PROGMEM Language_Str MSG_LEVEL_CORNERS_IN_RANGE = _UxGT("All Corners Within Tolerance. Level Bed");
PROGMEM Language_Str MSG_LEVEL_CORNERS_GOOD_POINTS = _UxGT("Good Points: ");
PROGMEM Language_Str MSG_LEVEL_CORNERS_LAST_Z = _UxGT("Last Z: ");
PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("Next Corner"); PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("Next Corner");
PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("Mesh Editor"); PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("Mesh Editor");
PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("Edit Mesh"); PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("Edit Mesh");

159
Marlin/src/lcd/menu/menu_bed_corners.cpp

@ -56,6 +56,13 @@
float last_z; float last_z;
int good_points; int good_points;
bool corner_probing_done, wait_for_probe; bool corner_probing_done, wait_for_probe;
#if HAS_MARLINUI_U8GLIB
#include "../dogm/marlinui_DOGM.h"
#endif
#define GOOD_POINTS_TO_STR(N) ui8tostr2(N)
#define LAST_Z_TO_STR(N) ftostr53_63(N) //ftostr42_52(N)
#endif #endif
static_assert(LEVEL_CORNERS_Z_HOP >= 0, "LEVEL_CORNERS_Z_HOP must be >= 0. Please update your configuration."); static_assert(LEVEL_CORNERS_Z_HOP >= 0, "LEVEL_CORNERS_Z_HOP must be >= 0. Please update your configuration.");
@ -66,12 +73,89 @@ extern const char G28_STR[];
static bool leveling_was_active = false; static bool leveling_was_active = false;
#endif #endif
static int8_t bed_corner; #ifndef LEVEL_CORNERS_LEVELING_ORDER
#define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, LB, RB } // Default
//#define LEVEL_CORNERS_LEVELING_ORDER { LF, LB, RF } // 3 hard-coded points
//#define LEVEL_CORNERS_LEVELING_ORDER { LF, RF } // 3-Point tramming - Rear
//#define LEVEL_CORNERS_LEVELING_ORDER { LF, LB } // 3-Point tramming - Right
//#define LEVEL_CORNERS_LEVELING_ORDER { RF, RB } // 3-Point tramming - Left
//#define LEVEL_CORNERS_LEVELING_ORDER { LB, RB } // 3-Point tramming - Front
#endif
#define LF 1
#define RF 2
#define RB 3
#define LB 4
constexpr int lco[] = LEVEL_CORNERS_LEVELING_ORDER;
constexpr bool level_corners_3_points = COUNT(lco) == 2;
static_assert(level_corners_3_points || COUNT(lco) == 4, "LEVEL_CORNERS_LEVELING_ORDER must have exactly 2 or 4 corners.");
constexpr int lcodiff = abs(lco[0] - lco[1]);
static_assert(COUNT(lco) == 4 || lcodiff == 1 || lcodiff == 3, "The first two LEVEL_CORNERS_LEVELING_ORDER corners must be on the same edge.");
constexpr int nr_edge_points = level_corners_3_points ? 3 : 4;
constexpr int available_points = nr_edge_points + ENABLED(LEVEL_CENTER_TOO);
constexpr int center_index = TERN(LEVEL_CENTER_TOO, available_points - 1, -1);
constexpr float inset_lfrb[4] = LEVEL_CORNERS_INSET_LFRB; constexpr float inset_lfrb[4] = LEVEL_CORNERS_INSET_LFRB;
constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1] }, constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1] },
rb { (X_MAX_BED) - inset_lfrb[2], (Y_MAX_BED) - inset_lfrb[3] }; rb { (X_MAX_BED) - inset_lfrb[2], (Y_MAX_BED) - inset_lfrb[3] };
static int8_t bed_corner;
/**
* Select next corner coordinates
*/
static inline void _lcd_level_bed_corners_get_next_position() {
if (level_corners_3_points) {
if (bed_corner >= available_points) bed_corner = 0; // Above max position -> move back to first corner
switch (bed_corner) {
case 0 ... 1:
// First two corners set explicitly by the configuration
current_position = lf; // Left front
switch (lco[bed_corner]) {
case RF: current_position.x = rb.x; break; // Right Front
case RB: current_position = rb; break; // Right Back
case LB: current_position.y = rb.y; break; // Left Back
}
break;
case 2:
// Determine which edge to probe for 3rd point
current_position.set(lf.x + (rb.x - lf.x) / 2, lf.y + (rb.y - lf.y) / 2);
if ((lco[0] == LB && lco[1] == RB) || (lco[0] == RB && lco[1] == LB)) current_position.y = lf.y; // Front Center
if ((lco[0] == LF && lco[1] == LB) || (lco[0] == LB && lco[1] == LF)) current_position.x = rb.x; // Center Right
if ((lco[0] == RF && lco[1] == RB) || (lco[0] == RB && lco[1] == RF)) current_position.x = lf.x; // Left Center
if ((lco[0] == LF && lco[1] == RF) || (lco[0] == RF && lco[1] == LF)) current_position.y = rb.y; // Center Back
#if DISABLED(LEVEL_CENTER_TOO) && ENABLED(LEVEL_CORNERS_USE_PROBE)
bed_corner++; // Must increment the count to ensure it resets the loop if the 3rd point is out of tolerance
#endif
break;
#if ENABLED(LEVEL_CENTER_TOO)
case 3:
current_position.set(X_CENTER, Y_CENTER);
break;
#endif
}
}
else {
// Four-Corner Bed Tramming with optional center
if (TERN0(LEVEL_CENTER_TOO, bed_corner == center_index)) {
current_position.set(X_CENTER, Y_CENTER);
TERN_(LEVEL_CORNERS_USE_PROBE, good_points--); // Decrement to allow one additional probe point
}
else {
current_position = lf; // Left front
switch (lco[bed_corner]) {
case RF: current_position.x = rb.x; break; // Right front
case RB: current_position = rb; break; // Right rear
case LB: current_position.y = rb.y; break; // Left rear
}
}
}
}
/** /**
* Level corners, starting in the front-left corner. * Level corners, starting in the front-left corner.
*/ */
@ -82,8 +166,37 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1]
VALIDATE_POINT(lf.x, Y_CENTER, "left"); VALIDATE_POINT(X_CENTER, lf.y, "front"); VALIDATE_POINT(lf.x, Y_CENTER, "left"); VALIDATE_POINT(X_CENTER, lf.y, "front");
VALIDATE_POINT(rb.x, Y_CENTER, "right"); VALIDATE_POINT(X_CENTER, rb.y, "back"); VALIDATE_POINT(rb.x, Y_CENTER, "right"); VALIDATE_POINT(X_CENTER, rb.y, "back");
#ifndef PAGE_CONTAINS
#define PAGE_CONTAINS(...) true
#endif
void _lcd_draw_probing() { void _lcd_draw_probing() {
if (ui.should_draw()) MenuItem_static::draw((LCD_HEIGHT - 1) / 2, GET_TEXT(MSG_PROBING_MESH)); if (!ui.should_draw()) return;
TERN_(HAS_MARLINUI_U8GLIB, ui.set_font(FONT_MENU)); // Set up the font for extra info
MenuItem_static::draw(0, GET_TEXT(MSG_PROBING_MESH), SS_INVERT); // "Probing Mesh" heading
uint8_t cy = LCD_HEIGHT - 1, y = LCD_ROW_Y(cy);
// Display # of good points found vs total needed
if (PAGE_CONTAINS(y - (MENU_FONT_HEIGHT), y)) {
SETCURSOR(0, cy);
lcd_put_u8str_P(GET_TEXT(MSG_LEVEL_CORNERS_GOOD_POINTS));
lcd_put_u8str(GOOD_POINTS_TO_STR(good_points));
lcd_put_wchar('/');
lcd_put_u8str(GOOD_POINTS_TO_STR(nr_edge_points));
}
--cy;
y -= MENU_FONT_HEIGHT;
// Display the Last Z value
if (PAGE_CONTAINS(y - (MENU_FONT_HEIGHT), y)) {
SETCURSOR(0, cy);
lcd_put_u8str_P(GET_TEXT(MSG_LEVEL_CORNERS_LAST_Z));
lcd_put_u8str(LAST_Z_TO_STR(last_z));
}
} }
void _lcd_draw_raise() { void _lcd_draw_raise() {
@ -112,7 +225,7 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1]
bool _lcd_level_bed_corners_probe(bool verify=false) { bool _lcd_level_bed_corners_probe(bool verify=false) {
if (verify) do_blocking_move_to_z(current_position.z + LEVEL_CORNERS_Z_HOP); // do clearance if needed if (verify) do_blocking_move_to_z(current_position.z + LEVEL_CORNERS_Z_HOP); // do clearance if needed
TERN_(BLTOUCH_SLOW_MODE, bltouch.deploy()); // Deploy in LOW SPEED MODE on every probe action TERN_(BLTOUCH_SLOW_MODE, bltouch.deploy()); // Deploy in LOW SPEED MODE on every probe action
do_blocking_move_to_z(last_z - LEVEL_CORNERS_PROBE_TOLERANCE, manual_feedrate_mm_s.z); // Move down to lower tolerance do_blocking_move_to_z(last_z - LEVEL_CORNERS_PROBE_TOLERANCE, MMM_TO_MMS(Z_PROBE_SPEED_SLOW)); // Move down to lower tolerance
if (TEST(endstops.trigger_state(), TERN(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, Z_MIN, Z_MIN_PROBE))) { // check if probe triggered if (TEST(endstops.trigger_state(), TERN(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, Z_MIN, Z_MIN_PROBE))) { // check if probe triggered
endstops.hit_on_purpose(); endstops.hit_on_purpose();
set_current_from_steppers_for_axis(Z_AXIS); set_current_from_steppers_for_axis(Z_AXIS);
@ -149,25 +262,18 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1]
} }
void _lcd_test_corners() { void _lcd_test_corners() {
ui.goto_screen(_lcd_draw_probing); bed_corner = TERN(LEVEL_CENTER_TOO, center_index, 0);
bed_corner = TERN(LEVEL_CENTER_TOO, 4, 0);
last_z = LEVEL_CORNERS_HEIGHT; last_z = LEVEL_CORNERS_HEIGHT;
endstops.enable_z_probe(true); endstops.enable_z_probe(true);
good_points = 0; good_points = 0;
ui.goto_screen(_lcd_draw_probing);
do { do {
ui.refresh(LCDVIEW_REDRAW_NOW);
_lcd_draw_probing(); //update screen with # of good points
do_blocking_move_to_z(current_position.z + LEVEL_CORNERS_Z_HOP); // clearance do_blocking_move_to_z(current_position.z + LEVEL_CORNERS_Z_HOP); // clearance
// Select next corner coordinates
xy_pos_t plf = lf - probe.offset_xy, prb = rb - probe.offset_xy; _lcd_level_bed_corners_get_next_position(); // Select next corner coordinates
switch (bed_corner) { current_position -= probe.offset_xy; // Account for probe offsets
case 0: current_position = plf; break; // copy xy
case 1: current_position.x = prb.x; break;
case 2: current_position.y = prb.y; break;
case 3: current_position.x = plf.x; break;
#if ENABLED(LEVEL_CENTER_TOO)
case 4: current_position.set(X_CENTER - probe.offset_xy.x, Y_CENTER - probe.offset_xy.y); break;
#endif
}
do_blocking_move_to_xy(current_position); // Goto corner do_blocking_move_to_xy(current_position); // Goto corner
if (!_lcd_level_bed_corners_probe()) { // Probe down to tolerance if (!_lcd_level_bed_corners_probe()) { // Probe down to tolerance
@ -185,10 +291,10 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1]
return; return;
} }
if (bed_corner != 4) good_points++; // ignore center if (bed_corner != center_index) good_points++; // ignore center
if (++bed_corner > 3) bed_corner = 0; if (++bed_corner > 3) bed_corner = 0;
} while (good_points < 4); // loop until all corners whitin tolerance } while (good_points < nr_edge_points); // loop until all points within tolerance
ui.goto_screen(_lcd_draw_level_prompt); // prompt for bed leveling ui.goto_screen(_lcd_draw_level_prompt); // prompt for bed leveling
ui.set_selection(true); ui.set_selection(true);
@ -198,18 +304,13 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1]
static inline void _lcd_goto_next_corner() { static inline void _lcd_goto_next_corner() {
line_to_z(LEVEL_CORNERS_Z_HOP); line_to_z(LEVEL_CORNERS_Z_HOP);
switch (bed_corner) {
case 0: current_position = lf; break; // copy xy // Select next corner coordinates
case 1: current_position.x = rb.x; break; _lcd_level_bed_corners_get_next_position();
case 2: current_position.y = rb.y; break;
case 3: current_position.x = lf.x; break;
#if ENABLED(LEVEL_CENTER_TOO)
case 4: current_position.set(X_CENTER, Y_CENTER); break;
#endif
}
line_to_current_position(manual_feedrate_mm_s.x); line_to_current_position(manual_feedrate_mm_s.x);
line_to_z(LEVEL_CORNERS_HEIGHT); line_to_z(LEVEL_CORNERS_HEIGHT);
if (++bed_corner > 3 + ENABLED(LEVEL_CENTER_TOO)) bed_corner = 0; if (++bed_corner >= available_points) bed_corner = 0;
} }
#endif // !LEVEL_CORNERS_USE_PROBE #endif // !LEVEL_CORNERS_USE_PROBE

6
buildroot/tests/rambo-tests

@ -30,7 +30,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
BLINKM PCA9533 PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \ BLINKM PCA9533 PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \
NEOPIXEL_LED CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \ NEOPIXEL_LED CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \
PID_PARAMS_PER_HOTEND PID_AUTOTUNE_MENU PID_EDIT_MENU LCD_SHOW_E_TOTAL \ PID_PARAMS_PER_HOTEND PID_AUTOTUNE_MENU PID_EDIT_MENU LCD_SHOW_E_TOTAL \
PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LEVEL_BED_CORNERS \ PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LEVEL_BED_CORNERS LEVEL_CENTER_TOO \
NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \ NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \
ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES FILAMENT_UNLOAD_ALL_EXTRUDERS \ ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES FILAMENT_UNLOAD_ALL_EXTRUDERS \
PASSWORD_FEATURE PASSWORD_ON_STARTUP PASSWORD_ON_SD_PRINT_MENU PASSWORD_AFTER_SD_PRINT_END PASSWORD_AFTER_SD_PRINT_ABORT \ PASSWORD_FEATURE PASSWORD_ON_STARTUP PASSWORD_ON_SD_PRINT_MENU PASSWORD_AFTER_SD_PRINT_END PASSWORD_AFTER_SD_PRINT_ABORT \
@ -53,10 +53,12 @@ opt_set EXTRUDERS 0
opt_set TEMP_SENSOR_0 999 opt_set TEMP_SENSOR_0 999
opt_set DUMMY_THERMISTOR_999_VALUE 170 opt_set DUMMY_THERMISTOR_999_VALUE 170
opt_set DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }' opt_set DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }'
opt_set LEVEL_CORNERS_LEVELING_ORDER '{ LF, RF }'
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \ opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \ REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \
S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \ S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \
ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES \
LEVEL_BED_CORNERS LEVEL_CENTER_TOO
opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS
exec_test $1 $2 "Rambo CNC Configuration" "$3" exec_test $1 $2 "Rambo CNC Configuration" "$3"

Loading…
Cancel
Save