From 418524b1bece25b33f603fa9d0b5de0a6ae479ae Mon Sep 17 00:00:00 2001 From: RFBomb Date: Sat, 16 Jan 2021 01:43:38 -0500 Subject: [PATCH] Configurable Corner Leveling point order (#20733) --- Marlin/Configuration.h | 19 +++ Marlin/src/lcd/language/language_en.h | 2 + Marlin/src/lcd/menu/menu_bed_corners.cpp | 159 ++++++++++++++++++----- buildroot/tests/rambo-tests | 6 +- 4 files changed, 155 insertions(+), 31 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 3f9b6174c2..4ec64f8659 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1451,6 +1451,25 @@ #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify //#define LEVEL_CORNERS_AUDIO_FEEDBACK #endif + + /** + * Corner Leveling Order + * + * Set 2 or 4 points. When 2 points are given, the 3rd is the center of the opposite edge. + * + * LF Left-Front RF Right-Front + * LB Left-Back RB Right-Back + * + * Examples: + * + * Default {LF,RB,LB,RF} {LF,RF} {LB,LF} + * LB --------- RB LB --------- RB LB --------- RB LB --------- RB + * | 4 3 | | 3 2 | | <3> | | 1 | + * | | | | | | | <3>| + * | 1 2 | | 1 4 | | 1 2 | | 2 | + * LF --------- RF LF --------- RF LF --------- RF LF --------- RF + */ + #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 1969c98ccc..b17e81d831 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -130,6 +130,8 @@ namespace Language_en { PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT("Level Corners"); PROGMEM Language_Str MSG_LEVEL_CORNERS_RAISE = _UxGT("Raise Bed Until Probe Triggered"); PROGMEM Language_Str MSG_LEVEL_CORNERS_IN_RANGE = _UxGT("All Corners Within Tolerance. Level Bed"); + PROGMEM Language_Str MSG_LEVEL_CORNERS_GOOD_POINTS = _UxGT("Good Points: "); + PROGMEM Language_Str MSG_LEVEL_CORNERS_LAST_Z = _UxGT("Last Z: "); PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("Next Corner"); PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("Mesh Editor"); PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("Edit Mesh"); diff --git a/Marlin/src/lcd/menu/menu_bed_corners.cpp b/Marlin/src/lcd/menu/menu_bed_corners.cpp index 2252cbc49f..0088f306f6 100644 --- a/Marlin/src/lcd/menu/menu_bed_corners.cpp +++ b/Marlin/src/lcd/menu/menu_bed_corners.cpp @@ -56,6 +56,13 @@ float last_z; int good_points; bool corner_probing_done, wait_for_probe; + + #if HAS_MARLINUI_U8GLIB + #include "../dogm/marlinui_DOGM.h" + #endif + #define GOOD_POINTS_TO_STR(N) ui8tostr2(N) + #define LAST_Z_TO_STR(N) ftostr53_63(N) //ftostr42_52(N) + #endif static_assert(LEVEL_CORNERS_Z_HOP >= 0, "LEVEL_CORNERS_Z_HOP must be >= 0. Please update your configuration."); @@ -66,12 +73,89 @@ extern const char G28_STR[]; static bool leveling_was_active = false; #endif -static int8_t bed_corner; +#ifndef LEVEL_CORNERS_LEVELING_ORDER + #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, LB, RB } // Default + //#define LEVEL_CORNERS_LEVELING_ORDER { LF, LB, RF } // 3 hard-coded points + //#define LEVEL_CORNERS_LEVELING_ORDER { LF, RF } // 3-Point tramming - Rear + //#define LEVEL_CORNERS_LEVELING_ORDER { LF, LB } // 3-Point tramming - Right + //#define LEVEL_CORNERS_LEVELING_ORDER { RF, RB } // 3-Point tramming - Left + //#define LEVEL_CORNERS_LEVELING_ORDER { LB, RB } // 3-Point tramming - Front +#endif + +#define LF 1 +#define RF 2 +#define RB 3 +#define LB 4 +constexpr int lco[] = LEVEL_CORNERS_LEVELING_ORDER; +constexpr bool level_corners_3_points = COUNT(lco) == 2; +static_assert(level_corners_3_points || COUNT(lco) == 4, "LEVEL_CORNERS_LEVELING_ORDER must have exactly 2 or 4 corners."); + +constexpr int lcodiff = abs(lco[0] - lco[1]); +static_assert(COUNT(lco) == 4 || lcodiff == 1 || lcodiff == 3, "The first two LEVEL_CORNERS_LEVELING_ORDER corners must be on the same edge."); +constexpr int nr_edge_points = level_corners_3_points ? 3 : 4; +constexpr int available_points = nr_edge_points + ENABLED(LEVEL_CENTER_TOO); +constexpr int center_index = TERN(LEVEL_CENTER_TOO, available_points - 1, -1); constexpr float inset_lfrb[4] = LEVEL_CORNERS_INSET_LFRB; constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1] }, rb { (X_MAX_BED) - inset_lfrb[2], (Y_MAX_BED) - inset_lfrb[3] }; +static int8_t bed_corner; + +/** + * Select next corner coordinates + */ +static inline void _lcd_level_bed_corners_get_next_position() { + + if (level_corners_3_points) { + if (bed_corner >= available_points) bed_corner = 0; // Above max position -> move back to first corner + switch (bed_corner) { + case 0 ... 1: + // First two corners set explicitly by the configuration + current_position = lf; // Left front + switch (lco[bed_corner]) { + case RF: current_position.x = rb.x; break; // Right Front + case RB: current_position = rb; break; // Right Back + case LB: current_position.y = rb.y; break; // Left Back + } + break; + + case 2: + // Determine which edge to probe for 3rd point + current_position.set(lf.x + (rb.x - lf.x) / 2, lf.y + (rb.y - lf.y) / 2); + if ((lco[0] == LB && lco[1] == RB) || (lco[0] == RB && lco[1] == LB)) current_position.y = lf.y; // Front Center + if ((lco[0] == LF && lco[1] == LB) || (lco[0] == LB && lco[1] == LF)) current_position.x = rb.x; // Center Right + if ((lco[0] == RF && lco[1] == RB) || (lco[0] == RB && lco[1] == RF)) current_position.x = lf.x; // Left Center + if ((lco[0] == LF && lco[1] == RF) || (lco[0] == RF && lco[1] == LF)) current_position.y = rb.y; // Center Back + #if DISABLED(LEVEL_CENTER_TOO) && ENABLED(LEVEL_CORNERS_USE_PROBE) + bed_corner++; // Must increment the count to ensure it resets the loop if the 3rd point is out of tolerance + #endif + break; + + #if ENABLED(LEVEL_CENTER_TOO) + case 3: + current_position.set(X_CENTER, Y_CENTER); + break; + #endif + } + } + else { + // Four-Corner Bed Tramming with optional center + if (TERN0(LEVEL_CENTER_TOO, bed_corner == center_index)) { + current_position.set(X_CENTER, Y_CENTER); + TERN_(LEVEL_CORNERS_USE_PROBE, good_points--); // Decrement to allow one additional probe point + } + else { + current_position = lf; // Left front + switch (lco[bed_corner]) { + case RF: current_position.x = rb.x; break; // Right front + case RB: current_position = rb; break; // Right rear + case LB: current_position.y = rb.y; break; // Left rear + } + } + } +} + /** * Level corners, starting in the front-left corner. */ @@ -82,8 +166,37 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1] VALIDATE_POINT(lf.x, Y_CENTER, "left"); VALIDATE_POINT(X_CENTER, lf.y, "front"); VALIDATE_POINT(rb.x, Y_CENTER, "right"); VALIDATE_POINT(X_CENTER, rb.y, "back"); + #ifndef PAGE_CONTAINS + #define PAGE_CONTAINS(...) true + #endif + void _lcd_draw_probing() { - if (ui.should_draw()) MenuItem_static::draw((LCD_HEIGHT - 1) / 2, GET_TEXT(MSG_PROBING_MESH)); + if (!ui.should_draw()) return; + + TERN_(HAS_MARLINUI_U8GLIB, ui.set_font(FONT_MENU)); // Set up the font for extra info + + MenuItem_static::draw(0, GET_TEXT(MSG_PROBING_MESH), SS_INVERT); // "Probing Mesh" heading + + uint8_t cy = LCD_HEIGHT - 1, y = LCD_ROW_Y(cy); + + // Display # of good points found vs total needed + if (PAGE_CONTAINS(y - (MENU_FONT_HEIGHT), y)) { + SETCURSOR(0, cy); + lcd_put_u8str_P(GET_TEXT(MSG_LEVEL_CORNERS_GOOD_POINTS)); + lcd_put_u8str(GOOD_POINTS_TO_STR(good_points)); + lcd_put_wchar('/'); + lcd_put_u8str(GOOD_POINTS_TO_STR(nr_edge_points)); + } + + --cy; + y -= MENU_FONT_HEIGHT; + + // Display the Last Z value + if (PAGE_CONTAINS(y - (MENU_FONT_HEIGHT), y)) { + SETCURSOR(0, cy); + lcd_put_u8str_P(GET_TEXT(MSG_LEVEL_CORNERS_LAST_Z)); + lcd_put_u8str(LAST_Z_TO_STR(last_z)); + } } void _lcd_draw_raise() { @@ -112,7 +225,7 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1] bool _lcd_level_bed_corners_probe(bool verify=false) { if (verify) do_blocking_move_to_z(current_position.z + LEVEL_CORNERS_Z_HOP); // do clearance if needed TERN_(BLTOUCH_SLOW_MODE, bltouch.deploy()); // Deploy in LOW SPEED MODE on every probe action - do_blocking_move_to_z(last_z - LEVEL_CORNERS_PROBE_TOLERANCE, manual_feedrate_mm_s.z); // Move down to lower tolerance + do_blocking_move_to_z(last_z - LEVEL_CORNERS_PROBE_TOLERANCE, MMM_TO_MMS(Z_PROBE_SPEED_SLOW)); // Move down to lower tolerance if (TEST(endstops.trigger_state(), TERN(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, Z_MIN, Z_MIN_PROBE))) { // check if probe triggered endstops.hit_on_purpose(); set_current_from_steppers_for_axis(Z_AXIS); @@ -149,25 +262,18 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1] } void _lcd_test_corners() { - ui.goto_screen(_lcd_draw_probing); - bed_corner = TERN(LEVEL_CENTER_TOO, 4, 0); + bed_corner = TERN(LEVEL_CENTER_TOO, center_index, 0); last_z = LEVEL_CORNERS_HEIGHT; endstops.enable_z_probe(true); good_points = 0; - + ui.goto_screen(_lcd_draw_probing); do { + ui.refresh(LCDVIEW_REDRAW_NOW); + _lcd_draw_probing(); //update screen with # of good points do_blocking_move_to_z(current_position.z + LEVEL_CORNERS_Z_HOP); // clearance - // Select next corner coordinates - xy_pos_t plf = lf - probe.offset_xy, prb = rb - probe.offset_xy; - switch (bed_corner) { - case 0: current_position = plf; break; // copy xy - case 1: current_position.x = prb.x; break; - case 2: current_position.y = prb.y; break; - case 3: current_position.x = plf.x; break; - #if ENABLED(LEVEL_CENTER_TOO) - case 4: current_position.set(X_CENTER - probe.offset_xy.x, Y_CENTER - probe.offset_xy.y); break; - #endif - } + + _lcd_level_bed_corners_get_next_position(); // Select next corner coordinates + current_position -= probe.offset_xy; // Account for probe offsets do_blocking_move_to_xy(current_position); // Goto corner if (!_lcd_level_bed_corners_probe()) { // Probe down to tolerance @@ -185,10 +291,10 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1] return; } - if (bed_corner != 4) good_points++; // ignore center + if (bed_corner != center_index) good_points++; // ignore center if (++bed_corner > 3) bed_corner = 0; - } while (good_points < 4); // loop until all corners whitin tolerance + } while (good_points < nr_edge_points); // loop until all points within tolerance ui.goto_screen(_lcd_draw_level_prompt); // prompt for bed leveling ui.set_selection(true); @@ -198,18 +304,13 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1] static inline void _lcd_goto_next_corner() { line_to_z(LEVEL_CORNERS_Z_HOP); - switch (bed_corner) { - case 0: current_position = lf; break; // copy xy - case 1: current_position.x = rb.x; break; - case 2: current_position.y = rb.y; break; - case 3: current_position.x = lf.x; break; - #if ENABLED(LEVEL_CENTER_TOO) - case 4: current_position.set(X_CENTER, Y_CENTER); break; - #endif - } + + // Select next corner coordinates + _lcd_level_bed_corners_get_next_position(); + line_to_current_position(manual_feedrate_mm_s.x); line_to_z(LEVEL_CORNERS_HEIGHT); - if (++bed_corner > 3 + ENABLED(LEVEL_CENTER_TOO)) bed_corner = 0; + if (++bed_corner >= available_points) bed_corner = 0; } #endif // !LEVEL_CORNERS_USE_PROBE diff --git a/buildroot/tests/rambo-tests b/buildroot/tests/rambo-tests index 5bc1b39f7e..d471f4201c 100755 --- a/buildroot/tests/rambo-tests +++ b/buildroot/tests/rambo-tests @@ -30,7 +30,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE BLINKM PCA9533 PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \ NEOPIXEL_LED CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \ PID_PARAMS_PER_HOTEND PID_AUTOTUNE_MENU PID_EDIT_MENU LCD_SHOW_E_TOTAL \ - PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LEVEL_BED_CORNERS \ + PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LEVEL_BED_CORNERS LEVEL_CENTER_TOO \ NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \ ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES FILAMENT_UNLOAD_ALL_EXTRUDERS \ PASSWORD_FEATURE PASSWORD_ON_STARTUP PASSWORD_ON_SD_PRINT_MENU PASSWORD_AFTER_SD_PRINT_END PASSWORD_AFTER_SD_PRINT_ABORT \ @@ -53,10 +53,12 @@ opt_set EXTRUDERS 0 opt_set TEMP_SENSOR_0 999 opt_set DUMMY_THERMISTOR_999_VALUE 170 opt_set DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }' +opt_set LEVEL_CORNERS_LEVELING_ORDER '{ LF, RF }' opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \ REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \ S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \ - ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES + ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES \ + LEVEL_BED_CORNERS LEVEL_CENTER_TOO opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS exec_test $1 $2 "Rambo CNC Configuration" "$3"