andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Updated bq Hephestos 2 example configuration

pull/1/head
João Brázio 8 years ago
parent
7c71bb2900
commit
3f75edb1d6
4 changed files with 57 additions and 44 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 46
      Marlin/example_configurations/Hephestos_2/Configuration.h
  2. 22
      Marlin/example_configurations/Hephestos_2/Configuration_adv.h
  3. 1
      Marlin/example_configurations/Hephestos_2/README.md
  4. 12
      Marlin/pins_BQ_ZUM_MEGA_3D.h

46
Marlin/example_configurations/Hephestos_2/Configuration.h
View File

@ -122,7 +122,7 @@
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 115200
// Enable the Bluetooth serial interface on AT90USB devices // Enable the Bluetooth serial interface on AT90USB devices
//#define BLUETOOTH //#define BLUETOOTH
@ -190,7 +190,7 @@
* *
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define POWER_SUPPLY 0
#if POWER_SUPPLY > 0 #if POWER_SUPPLY > 0
// Enable this option to leave the PSU off at startup. // Enable this option to leave the PSU off at startup.
@ -308,7 +308,7 @@
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
// Set/get with gcode: M301 E[extruder number, 0-2] // Set/get with gcode: M301 E[extruder number, 0-2]
#define PID_FUNCTIONAL_RANGE 250 // If the temperature difference between the target temperature and the actual temperature #define PID_FUNCTIONAL_RANGE 50 // If the temperature difference between the target temperature and the actual temperature
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
@ -457,7 +457,7 @@
// Enable this feature if all enabled endstop pins are interrupt-capable. // Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE #define ENDSTOP_INTERRUPTS_FEATURE
//============================================================================= //=============================================================================
//============================== Movement Settings ============================ //============================== Movement Settings ============================
@ -480,7 +480,7 @@
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 210.02 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 204 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
@ -495,7 +495,7 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 20, 1000 } #define DEFAULT_MAX_ACCELERATION { 800, 800, 20, 1000 }
/** /**
* Default Acceleration (change/s) change = mm/s * Default Acceleration (change/s) change = mm/s
@ -505,8 +505,8 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
/** /**
@ -517,10 +517,10 @@
* When changing speed and direction, if the difference is less than the * When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously. * value set here, it may happen instantaneously.
*/ */
#define DEFAULT_XJERK 20.0 #define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 20.0 #define DEFAULT_YJERK 10.0
#define DEFAULT_ZJERK 0.4 #define DEFAULT_ZJERK 0.4
#define DEFAULT_EJERK 2.0 #define DEFAULT_EJERK 1.0
//=========================================================================== //===========================================================================
@ -625,11 +625,11 @@
// Enable Z_MIN_PROBE_ENDSTOP to use _both_ a Z Probe and a Z-min-endstop on the same machine. // Enable Z_MIN_PROBE_ENDSTOP to use _both_ a Z Probe and a Z-min-endstop on the same machine.
// With this option the Z_MIN_PROBE_PIN will only be used for probing, never for homing. // With this option the Z_MIN_PROBE_PIN will only be used for probing, never for homing.
// //
#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_ENDSTOP
// Enable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use the Z_MIN_PIN for your Z_MIN_PROBE. // Enable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use the Z_MIN_PIN for your Z_MIN_PROBE.
// The Z_MIN_PIN will then be used for both Z-homing and probing. // The Z_MIN_PIN will then be used for both Z-homing and probing.
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// To use a probe you must enable one of the two options above! // To use a probe you must enable one of the two options above!
@ -650,7 +650,7 @@
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/ */
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points
// //
@ -880,8 +880,8 @@
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (150*60) #define HOMING_FEEDRATE_XY (60*60)
#define HOMING_FEEDRATE_Z 200 #define HOMING_FEEDRATE_Z 120
//============================================================================= //=============================================================================
//============================= Additional Features =========================== //============================= Additional Features ===========================
@ -911,7 +911,7 @@
// every couple of seconds when it can't accept commands. // every couple of seconds when it can't accept commands.
// //
#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. #define DEFAULT_KEEPALIVE_INTERVAL 10 // Number of seconds between "busy" messages. Set with M113.
// //
// M100 Free Memory Watcher // M100 Free Memory Watcher
@ -956,11 +956,11 @@
// P2: The nozzle height will be raised by Z-park amount but never going over // P2: The nozzle height will be raised by Z-park amount but never going over
// the machine's limit of Z_MAX_POS. // the machine's limit of Z_MAX_POS.
// //
//#define NOZZLE_PARK_FEATURE #define NOZZLE_PARK_FEATURE
#if ENABLED(NOZZLE_PARK_FEATURE) #if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z } // Specify a park position as { X, Y, Z }
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 10 }
#endif #endif
// //
@ -997,18 +997,18 @@
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments // Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
// may change to add new functionality like different wipe patterns. // may change to add new functionality like different wipe patterns.
// //
//#define NOZZLE_CLEAN_FEATURE #define NOZZLE_CLEAN_FEATURE
#if ENABLED(NOZZLE_CLEAN_FEATURE) #if ENABLED(NOZZLE_CLEAN_FEATURE)
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// Specify positions as { X, Y, Z } // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} #define NOZZLE_CLEAN_START_POINT { X_MIN_POS + 10, Y_MAX_POS - 9, (Z_MIN_POS + 0.5)}
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} #define NOZZLE_CLEAN_END_POINT { X_MIN_POS + 90, Y_MAX_POS - 0, (Z_MIN_POS + 0.5)}
// Moves the nozzle to the initial position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_GOBACK //#define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

22
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View File

@ -171,7 +171,7 @@
// Extruder runout prevention. // Extruder runout prevention.
// If the machine is idle and the temperature over MINTEMP // If the machine is idle and the temperature over MINTEMP
// then extrude some filament every couple of SECONDS. // then extrude some filament every couple of SECONDS.
//#define EXTRUDER_RUNOUT_PREVENT #define EXTRUDER_RUNOUT_PREVENT
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
@ -335,7 +335,7 @@
#define Y_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 2 #define Z_HOME_BUMP_MM 2
#define HOMING_BUMP_DIVISOR {2, 2, 4} // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR {2, 2, 4} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. #define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
// When G28 is called, this option will make Y home before X // When G28 is called, this option will make Y home before X
#define HOME_Y_BEFORE_X #define HOME_Y_BEFORE_X
@ -369,7 +369,7 @@
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder //#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif #endif
// @section extras // @section extras
@ -420,10 +420,10 @@
// @section lcd // @section lcd
// Include a page of printer information in the LCD Main Menu // Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU #define LCD_INFO_MENU
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY #define LCD_DECIMAL_SMALL_XY
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
@ -440,7 +440,7 @@
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using: // using:
#define MENU_ADDAUTOSTART //#define MENU_ADDAUTOSTART
// Show a progress bar on HD44780 LCDs for SD printing // Show a progress bar on HD44780 LCDs for SD printing
//#define LCD_PROGRESS_BAR //#define LCD_PROGRESS_BAR
@ -470,7 +470,7 @@
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
//#define USE_BIG_EDIT_FONT #define USE_BIG_EDIT_FONT
// A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM.
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
@ -527,7 +527,7 @@
// interrupts (without LCD update). By enforcing a minimum time-per-move, the buffer is prevented from // interrupts (without LCD update). By enforcing a minimum time-per-move, the buffer is prevented from
// draining. // draining.
// //
//#define ENSURE_SMOOTH_MOVES #define ENSURE_SMOOTH_MOVES
#if ENABLED(ENSURE_SMOOTH_MOVES) #if ENABLED(ENSURE_SMOOTH_MOVES)
//#define ALWAYS_ALLOW_MENU // If enabled, the menu will always be responsive. //#define ALWAYS_ALLOW_MENU // If enabled, the menu will always be responsive.
// WARNING: Menu navigation during short moves may cause stuttering! // WARNING: Menu navigation during short moves may cause stuttering!
@ -622,9 +622,9 @@
// The number of linear motions that can be in the plan at any give time. // The number of linear motions that can be in the plan at any give time.
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering. // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller #define BLOCK_BUFFER_SIZE 32 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
#else #else
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer #define BLOCK_BUFFER_SIZE 64 // maximize block buffer
#endif #endif
// @section serial // @section serial
@ -640,7 +640,7 @@
// For debug-echo: 128 bytes for the optimal speed. // For debug-echo: 128 bytes for the optimal speed.
// Other output doesn't need to be that speedy. // Other output doesn't need to be that speedy.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 32
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.

1
Marlin/example_configurations/Hephestos_2/README.md
View File

@ -12,3 +12,4 @@ NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will ch
SD printing now disables the heater when finished SD printing now disables the heater when finished
* 2016/07/13 - Update the `DEFAULT_AXIS_STEPS_PER_UNIT` for the Z axis * 2016/07/13 - Update the `DEFAULT_AXIS_STEPS_PER_UNIT` for the Z axis
Increased the `DEFAULT_XYJERK` Increased the `DEFAULT_XYJERK`
* 2016/12/13 - Configuration updated.

12
Marlin/pins_BQ_ZUM_MEGA_3D.h
View File

@ -83,3 +83,15 @@
// //
#undef PS_ON_PIN // 12 #undef PS_ON_PIN // 12
#define PS_ON_PIN 81 // External Power Supply #define PS_ON_PIN 81 // External Power Supply
// This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team
// decided to ship the printer only with the probe and no additional Z-min
// endstop and the instruction manual advises the user to connect the probe to
// IND_S_5V the option Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN will not work.
#ifdef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#undef Z_MIN_PIN
#undef Z_MAX_PIN
#define Z_MIN_PIN 19 // IND_S_5V
#define Z_MAX_PIN 18 // Z-MIN Label
#endif

Write Preview
Loading…
Cancel
Save