Repair some spacing

Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp

@@ -1,4 +1,4 @@
-/*
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *

Marlin/src/config/default/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -106,12 +106,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Cartesio/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Felix/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/JGAurora/A5/Configuration.h

@@ -112,12 +112,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Malyan/M150/Configuration.h

@@ -112,12 +112,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Mks/Sbase/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/SCARA/Configuration.h

@@ -137,12 +137,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/STM32F10/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -123,12 +123,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Tronxy/X5S/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -123,12 +123,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -111,12 +111,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/makibox/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**

Marlin/src/config/examples/wt150/Configuration.h

@@ -107,12 +107,12 @@
 #define SERIAL_PORT 0
 
 /**
-  * Select a secondary serial port on the board to use for communication with the host.
-  * This allows the connection of wireless adapters (for instance) to non-default port pins.
-  * Serial port -1 is the USB emulated serial port, if avaialble.
-  *
-  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
-  */
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if avaialble.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
 #define SERIAL_PORT_2 -1
 
 /**