From 38c7d53bf7068dbc2cfab6df66ab8113d707f7f3 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 10 Feb 2018 19:25:34 -0600 Subject: [PATCH] Repair some spacing --- Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp | 2 +- Marlin/src/config/default/Configuration.h | 12 ++++++------ .../examples/AlephObjects/TAZ4/Configuration.h | 12 ++++++------ .../examples/AliExpress/CL-260/Configuration.h | 12 ++++++------ Marlin/src/config/examples/Anet/A6/Configuration.h | 12 ++++++------ Marlin/src/config/examples/Anet/A8/Configuration.h | 12 ++++++------ .../config/examples/Azteeg/X5GT/Configuration.h | 12 ++++++------ .../examples/BIBO/TouchX/cyclops/Configuration.h | 14 +++++++------- .../examples/BIBO/TouchX/default/Configuration.h | 14 +++++++------- .../config/examples/BQ/Hephestos/Configuration.h | 12 ++++++------ .../config/examples/BQ/Hephestos_2/Configuration.h | 12 ++++++------ .../src/config/examples/BQ/WITBOX/Configuration.h | 12 ++++++------ .../src/config/examples/Cartesio/Configuration.h | 12 ++++++------ .../config/examples/Creality/CR-10/Configuration.h | 12 ++++++------ Marlin/src/config/examples/Felix/Configuration.h | 12 ++++++------ .../src/config/examples/Felix/DUAL/Configuration.h | 12 ++++++------ .../examples/FolgerTech/i3-2020/Configuration.h | 12 ++++++------ .../examples/Geeetech/GT2560/Configuration.h | 12 ++++++------ .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 12 ++++++------ .../Prusa i3 Pro B/bltouch/Configuration.h | 12 ++++++------ .../Prusa i3 Pro B/noprobe/Configuration.h | 12 ++++++------ .../examples/Infitary/i3-M508/Configuration.h | 12 ++++++------ .../config/examples/JGAurora/A5/Configuration.h | 12 ++++++------ .../config/examples/Malyan/M150/Configuration.h | 12 ++++++------ .../examples/Micromake/C1/basic/Configuration.h | 12 ++++++------ .../examples/Micromake/C1/enhanced/Configuration.h | 12 ++++++------ .../src/config/examples/Mks/Sbase/Configuration.h | 12 ++++++------ .../RepRapWorld/Megatronics/Configuration.h | 12 ++++++------ .../src/config/examples/RigidBot/Configuration.h | 12 ++++++------ Marlin/src/config/examples/SCARA/Configuration.h | 12 ++++++------ .../src/config/examples/STM32F10/Configuration.h | 12 ++++++------ .../config/examples/Sanguinololu/Configuration.h | 12 ++++++------ .../src/config/examples/TinyBoy2/Configuration.h | 12 ++++++------ .../src/config/examples/Tronxy/X5S/Configuration.h | 12 ++++++------ .../config/examples/Velleman/K8200/Configuration.h | 12 ++++++------ .../config/examples/Velleman/K8400/Configuration.h | 12 ++++++------ .../Velleman/K8400/Dual-head/Configuration.h | 12 ++++++------ .../examples/adafruit/ST7565/Configuration.h | 12 ++++++------ .../delta/FLSUN/auto_calibrate/Configuration.h | 12 ++++++------ .../delta/FLSUN/kossel_mini/Configuration.h | 12 ++++++------ .../config/examples/delta/generic/Configuration.h | 12 ++++++------ .../examples/delta/kossel_mini/Configuration.h | 12 ++++++------ .../examples/delta/kossel_pro/Configuration.h | 12 ++++++------ .../examples/delta/kossel_xl/Configuration.h | 12 ++++++------ .../examples/gCreate/gMax1.5+/Configuration.h | 12 ++++++------ Marlin/src/config/examples/makibox/Configuration.h | 12 ++++++------ .../config/examples/tvrrug/Round2/Configuration.h | 12 ++++++------ Marlin/src/config/examples/wt150/Configuration.h | 12 ++++++------ Marlin/src/feature/I2CPositionEncoder.cpp | 2 +- Marlin/src/lcd/malyanlcd.cpp | 10 +++++----- Marlin/src/pins/pins_SELENA_COMPACT.h | 2 +- 51 files changed, 292 insertions(+), 292 deletions(-) diff --git a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp index a5e811c02a..48236cf91d 100644 --- a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp +++ b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h index afcd4a1b3e..b3b8dc1c99 100644 --- a/Marlin/src/config/default/Configuration.h +++ b/Marlin/src/config/default/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index a29d23634b..73ebca84ca 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index 9770b9d566..56745f364a 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index 12c955f676..b23194476c 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index 7bda518389..fbd79e19fc 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index 8840c48094..bde7f65b10 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index 3132ea28da..90e3349ca7 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** @@ -424,7 +424,7 @@ //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 23.89 #define DEFAULT_bedKi 1.37 - #define DEFAULT_bedKd 104.5 + #define DEFAULT_bedKd 104.5 //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index 268777b7cb..3681bd44ff 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** @@ -424,7 +424,7 @@ //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 23.89 #define DEFAULT_bedKi 1.37 - #define DEFAULT_bedKd 104.5 + #define DEFAULT_bedKd 104.5 //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index 41b6b0aa2f..9ed041ab3d 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index f189ce0b14..dab11f0f91 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -106,12 +106,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index 8e4359ce12..8b49d048a2 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index e4a01571c1..01835a4f0f 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index 90963a4a80..181111e989 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index 1ec4730963..9888a23566 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 6ece777a78..0f667523d2 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index f8840146b9..bc57446780 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index 019b5872d4..d66b519e5e 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index fb21dca48a..ed657df2a3 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 7e83520b4e..5c4672cb24 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 8946159e65..6a0ea1e8b9 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index 1eb1d601df..01d7b036d9 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 2a1ca0d02e..ee582782a3 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -112,12 +112,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index 1b4b097888..d5b011d0fa 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -112,12 +112,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index e1b155d61f..cb0024891d 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index 35c2c449c0..0130dc48e6 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index 12ad2641a8..1201952f1b 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index e39942316d..73db23fcc5 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index 5c358acd29..be5ef3e98f 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index 6331a78353..e00ae3bbaa 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -137,12 +137,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index 4c84eaafe6..2d4a43f465 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index fc91328431..73fae70b02 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index 1a4002fa30..fa2f292a96 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -123,12 +123,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index 0d54caf6e7..c97b346efb 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index f6d8b2382d..463c8dba33 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -123,12 +123,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index 73e65e4cbf..3f0ca51503 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index bb0d8357bb..7dbe74aa47 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index e29e0bb410..80b8fb9365 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 83d5193361..e0812e38ea 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 83a70ab1c6..f9589fd54e 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index 8b708daa00..0cdb0d854b 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 3e0db35e2a..324739d6fb 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index 5570ced40e..901c667ef6 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -111,12 +111,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index 02d6448095..ae71210b6c 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index 0a17ef543f..6f8e1ec4f9 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index dfeb076ba0..232bc3f55f 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index 44698d73bf..1b18cb319b 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index 65dd5e91d6..d5e5ecff67 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -107,12 +107,12 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if avaialble. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if avaialble. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ #define SERIAL_PORT_2 -1 /** diff --git a/Marlin/src/feature/I2CPositionEncoder.cpp b/Marlin/src/feature/I2CPositionEncoder.cpp index 86ce1f1abe..7c80ff3a39 100644 --- a/Marlin/src/feature/I2CPositionEncoder.cpp +++ b/Marlin/src/feature/I2CPositionEncoder.cpp @@ -180,7 +180,7 @@ void I2CPositionEncoder::update() { errPrst[errPrstIdx++] = error; // Error must persist for I2CPE_ERR_PRST_ARRAY_SIZE error cycles. This also serves to improve the average accuracy if (errPrstIdx >= I2CPE_ERR_PRST_ARRAY_SIZE) { float sumP = 0; - LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i]; + LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i]; const int32_t errorP = int32_t(sumP * (1.0 / (I2CPE_ERR_PRST_ARRAY_SIZE))); SERIAL_ECHO(axis_codes[encoderAxis]); SERIAL_ECHOPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis]); diff --git a/Marlin/src/lcd/malyanlcd.cpp b/Marlin/src/lcd/malyanlcd.cpp index e912314acd..b165fd4dcb 100644 --- a/Marlin/src/lcd/malyanlcd.cpp +++ b/Marlin/src/lcd/malyanlcd.cpp @@ -100,7 +100,7 @@ void write_to_lcd(const char * const message) { * Set temp for hotend to 190 * {C:P050} * Set temp for bed to 50 - * + * * the command portion begins after the : */ void process_lcd_c_command(const char* command) { @@ -165,7 +165,7 @@ void process_lcd_eb_command(const char* command) { * These are currently all movement commands. * The command portion begins after the : * Move X Axis - * + * * {J:E}{J:X-200}{J:E} * {J:E}{J:X+200}{J:E} * X, Y, Z, A (extruder) @@ -204,10 +204,10 @@ void process_lcd_j_command(const char* command) { * Process an LCD 'P' command, related to homing and printing. * Cancel: * {P:X} - * + * * Home all axes: * {P:H} - * + * * Print a file: * {P:000} * The File number is specified as a three digit value. @@ -274,7 +274,7 @@ void process_lcd_p_command(const char* command) { * Handle an lcd 'S' command * {S:I} - Temperature request * {T0:999/000}{T1:000/000}{TP:004/000} - * + * * {S:L} - File Listing request * Printer Response: * {FILE:buttons.gcode} diff --git a/Marlin/src/pins/pins_SELENA_COMPACT.h b/Marlin/src/pins/pins_SELENA_COMPACT.h index 104c7c8b90..828d6ba64d 100644 --- a/Marlin/src/pins/pins_SELENA_COMPACT.h +++ b/Marlin/src/pins/pins_SELENA_COMPACT.h @@ -105,7 +105,7 @@ #define BTN_EN1 P3_25 #define BTN_EN2 P3_26 #define BTN_ENC P1_30 - + #define SD_DETECT_PIN -1 #endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER