Stephen Hawes
2 years ago
committed by
Scott Lahteine
5 changed files with 271 additions and 0 deletions
@ -0,0 +1,206 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
/**
|
|||
* STM32F407VET6 on Opulo Lumen PnP Rev3 |
|||
* Website - https://opulo.io/
|
|||
*/ |
|||
|
|||
#define ALLOW_STM32DUINO |
|||
#include "env_validate.h" |
|||
|
|||
#define BOARD_INFO_NAME "LumenPnP Motherboard REV04" |
|||
#define DEFAULT_MACHINE_NAME "LumenPnP" |
|||
|
|||
/**
|
|||
* By default, the extra stepper motor configuration is: |
|||
* I = Left Head |
|||
* J = Right Head |
|||
* K = Auxiliary (Conveyor belt) |
|||
*/ |
|||
|
|||
#define SRAM_EEPROM_EMULATION |
|||
#define MARLIN_EEPROM_SIZE 0x2000 // 8K
|
|||
|
|||
// I2C MCP3426 (16-Bit, 240SPS, dual-channel ADC)
|
|||
#define HAS_MCP3426_ADC |
|||
|
|||
//
|
|||
// Servos
|
|||
//
|
|||
#define SERVO0_PIN PB10 |
|||
#define SERVO1_PIN PB11 |
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_STOP_PIN PC6 |
|||
#define Y_STOP_PIN PD15 |
|||
#define Z_STOP_PIN PD14 |
|||
|
|||
// None of these require limit switches by default, so we leave these commented
|
|||
// here for your reference.
|
|||
//#define I_MIN_PIN PA8
|
|||
//#define I_MAX_PIN PA8
|
|||
//#define J_MIN_PIN PD13
|
|||
//#define J_MAX_PIN PD13
|
|||
//#define K_MIN_PIN PC9
|
|||
//#define K_MAX_PIN PC9
|
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_STEP_PIN PB15 |
|||
#define X_DIR_PIN PB14 |
|||
#define X_ENABLE_PIN PD9 |
|||
|
|||
#define Y_STEP_PIN PE15 |
|||
#define Y_DIR_PIN PE14 |
|||
#define Y_ENABLE_PIN PB13 |
|||
|
|||
#define Z_STEP_PIN PE7 |
|||
#define Z_DIR_PIN PB1 |
|||
#define Z_ENABLE_PIN PE9 |
|||
|
|||
#define I_STEP_PIN PC4 |
|||
#define I_DIR_PIN PA4 |
|||
#define I_ENABLE_PIN PB0 |
|||
|
|||
#define J_STEP_PIN PE11 |
|||
#define J_DIR_PIN PE10 |
|||
#define J_ENABLE_PIN PE13 |
|||
|
|||
#define K_STEP_PIN PD6 |
|||
#define K_DIR_PIN PD7 |
|||
#define K_ENABLE_PIN PA3 |
|||
|
|||
#if HAS_TMC_SPI |
|||
/**
|
|||
* Make sure to configure the jumpers on the back side of the Mobo according to |
|||
* this diagram: https://github.com/MarlinFirmware/Marlin/pull/23851
|
|||
*/ |
|||
#error "SPI drivers require a custom jumper configuration, see comment above! Comment out this line to continue." |
|||
|
|||
#if AXIS_HAS_SPI(X) |
|||
#define X_CS_PIN PD8 |
|||
#endif |
|||
#if AXIS_HAS_SPI(Y) |
|||
#define Y_CS_PIN PB12 |
|||
#endif |
|||
#if AXIS_HAS_SPI(Z) |
|||
#define Z_CS_PIN PE8 |
|||
#endif |
|||
#if AXIS_HAS_SPI(I) |
|||
#define I_CS_PIN PC5 |
|||
#endif |
|||
#if AXIS_HAS_SPI(J) |
|||
#define J_CS_PIN PE12 |
|||
#endif |
|||
#if AXIS_HAS_SPI(K) |
|||
#define K_CS_PIN PA2 |
|||
#endif |
|||
|
|||
#elif HAS_TMC_UART |
|||
|
|||
#define X_SERIAL_TX_PIN PD8 |
|||
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN |
|||
|
|||
#define Y_SERIAL_TX_PIN PB12 |
|||
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN |
|||
|
|||
#define Z_SERIAL_TX_PIN PE8 |
|||
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN |
|||
|
|||
#define I_SERIAL_TX_PIN PC5 |
|||
#define I_SERIAL_RX_PIN I_SERIAL_TX_PIN |
|||
|
|||
#define J_SERIAL_TX_PIN PE12 |
|||
#define J_SERIAL_RX_PIN J_SERIAL_TX_PIN |
|||
|
|||
#define K_SERIAL_TX_PIN PA2 |
|||
#define K_SERIAL_RX_PIN K_SERIAL_TX_PIN |
|||
|
|||
// Reduce baud rate to improve software serial reliability
|
|||
#define TMC_BAUD_RATE 19200 |
|||
|
|||
#endif |
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define FAN_PIN PE2 |
|||
#define FAN1_PIN PE3 |
|||
#define FAN2_PIN PE4 |
|||
#define FAN3_PIN PE5 |
|||
|
|||
#define FAN_SOFT_PWM_REQUIRED |
|||
|
|||
//
|
|||
// Neopixel
|
|||
//
|
|||
#define NEOPIXEL_PIN PC7 |
|||
#define NEOPIXEL2_PIN PC8 |
|||
|
|||
//
|
|||
// SPI
|
|||
//
|
|||
#define MISO_PIN PB4 |
|||
#define MOSI_PIN PB5 |
|||
#define SCK_PIN PB3 |
|||
|
|||
#define TMC_SW_MISO MISO_PIN |
|||
#define TMC_SW_MOSI MOSI_PIN |
|||
#define TMC_SW_SCK SCK_PIN |
|||
|
|||
//
|
|||
// I2C
|
|||
//
|
|||
#define I2C_SDA_PIN PB7 |
|||
#define I2C_SCL_PIN PB6 |
|||
|
|||
/**
|
|||
* The index mobo rev03 has 3 aux ports. We define them here so they may be used |
|||
* in other places and to make sure someone doesn't have to go look up the pinout |
|||
* in the board files. Each 12 pin aux port has this pinout: |
|||
* |
|||
* VDC 1 2 GND |
|||
* 3.3V 3 4 SCL (I2C_SCL_PIN) |
|||
* PWM1 5 6 SDA (I2C_SDA_PIN) |
|||
* PWM2 7 8 CIPO (MISO_PIN) |
|||
* A1 9 10 COPI (MOSI_PIN) |
|||
* A2 11 12 SCK (SCK_PIN) |
|||
*/ |
|||
#define LUMEN_AUX1_PWM1 PA15 |
|||
#define LUMEN_AUX1_PWM2 PA5 |
|||
#define LUMEN_AUX1_A1 PC0 |
|||
#define LUMEN_AUX1_A2 PC1 |
|||
|
|||
#define LUMEN_AUX2_PWM1 PA6 |
|||
#define LUMEN_AUX2_PWM2 PA7 |
|||
#define LUMEN_AUX2_A1 PC2 |
|||
#define LUMEN_AUX2_A2 PC3 |
|||
|
|||
#define LUMEN_AUX3_PWM1 PB8 |
|||
#define LUMEN_AUX3_PWM2 PB9 |
|||
#define LUMEN_AUX3_A1 PA0 |
|||
#define LUMEN_AUX3_A2 PA1 |
@ -0,0 +1,51 @@ |
|||
{ |
|||
"build": { |
|||
"core": "stm32", |
|||
"cpu": "cortex-m4", |
|||
"extra_flags": "-DSTM32F407xx", |
|||
"f_cpu": "168000000L", |
|||
"hwids": [ |
|||
[ |
|||
"0x0483", |
|||
"0xdf11" |
|||
], |
|||
[ |
|||
"0x1EAF", |
|||
"0x0003" |
|||
], |
|||
[ |
|||
"0x0483", |
|||
"0x3748" |
|||
] |
|||
], |
|||
"mcu": "stm32f407vet6", |
|||
"variant": "MARLIN_F407VE" |
|||
}, |
|||
"debug": { |
|||
"jlink_device": "STM32F407VE", |
|||
"openocd_target": "stm32f4x", |
|||
"svd_path": "STM32F40x.svd" |
|||
}, |
|||
"frameworks": [ |
|||
"arduino", |
|||
"stm32cube" |
|||
], |
|||
"name": "STM32F407VE (192k RAM. 512k Flash)", |
|||
"upload": { |
|||
"disable_flushing": false, |
|||
"maximum_ram_size": 131072, |
|||
"maximum_size": 524288, |
|||
"protocol": "dfu", |
|||
"protocols": [ |
|||
"stlink", |
|||
"dfu", |
|||
"jlink", |
|||
"blackmagic" |
|||
], |
|||
"require_upload_port": true, |
|||
"use_1200bps_touch": false, |
|||
"wait_for_upload_port": false |
|||
}, |
|||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html", |
|||
"vendor": "Generic" |
|||
} |
Loading…
Reference in new issue