Marlin_FB4S/Marlin/ubl.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#ifndef UNIFIED_BED_LEVELING_H
#define UNIFIED_BED_LEVELING_H

#include "MarlinConfig.h"

#if ENABLED(AUTO_BED_LEVELING_UBL)
  #include "Marlin.h"
  #include "planner.h"
  #include "math.h"
  #include "vector_3.h"

  #define UBL_VERSION "1.00"
  #define UBL_OK false
  #define UBL_ERR true

  typedef struct {
    int8_t x_index, y_index;
    float distance; // When populated, the distance from the search location
  } mesh_index_pair;

  enum MeshPointType { INVALID, REAL, SET_IN_BITMAP };

  void dump(char * const str, const float &f);
  bool ubl_lcd_clicked();
  void probe_entire_mesh(const float&, const float&, const bool, const bool, const bool);
  void debug_current_and_destination(const char * const title);
  void ubl_line_to_destination(const float&, uint8_t);
  void manually_probe_remaining_mesh(const float&, const float&, const float&, const float&, const bool);
  float measure_business_card_thickness(const float&);
  mesh_index_pair find_closest_mesh_point_of_type(const MeshPointType, const float&, const float&, const bool, unsigned int[16], bool);
  void shift_mesh_height();
  bool g29_parameter_parsing();
  void g29_what_command();
  void g29_eeprom_dump();
  void g29_compare_current_mesh_to_stored_mesh();
  void fine_tune_mesh(const float&, const float&, const bool);
  void bit_clear(uint16_t bits[16], uint8_t x, uint8_t y);
  void bit_set(uint16_t bits[16], uint8_t x, uint8_t y);
  bool is_bit_set(uint16_t bits[16], uint8_t x, uint8_t y);
  char *ftostr43sign(const float&, char);

  void gcode_G26();
  void gcode_G28();
  void gcode_G29();

  extern int ubl_cnt;

  ///////////////////////////////////////////////////////////////////////////////////////////////////////

  #if ENABLED(ULTRA_LCD)
    extern char lcd_status_message[];
    void lcd_quick_feedback();
  #endif


  #define MESH_X_DIST (float(UBL_MESH_MAX_X - (UBL_MESH_MIN_X)) / float(GRID_MAX_POINTS_X - 1))
  #define MESH_Y_DIST (float(UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y)) / float(GRID_MAX_POINTS_Y - 1))

  typedef struct {
    bool active = false;
    float z_offset = 0.0;
    int8_t eeprom_storage_slot = -1;
  } ubl_state;

  class unified_bed_leveling {
    private:

      static float last_specified_z;

    public:

//
// Please do not put STATIC qualifiers in front of ANYTHING in this file.   You WILL cause problems by doing that.
// The GCC optimizer inlines static functions and this DRAMATICALLY increases the size of the stack frame of 
// functions that call STATIC functions.
//
      void find_mean_mesh_height();
      void shift_mesh_height();
      void probe_entire_mesh(const float &lx, const float &ly, const bool do_ubl_mesh_map, const bool stow_probe, bool do_furthest);
      void tilt_mesh_based_on_3pts(const float &z1, const float &z2, const float &z3);
      void tilt_mesh_based_on_probed_grid(const bool do_ubl_mesh_map);
      void manually_probe_remaining_mesh(const float &lx, const float &ly, const float &z_clearance, const float &card_thickness, const bool do_ubl_mesh_map);
      void save_ubl_active_state_and_disable();
      void restore_ubl_active_state_and_leave();
      void g29_what_command(); 
//
// Please do not put STATIC qualifiers in front of ANYTHING in this file.   You WILL cause problems by doing that.
// The GCC optimizer inlines static functions and this DRAMATICALLY increases the size of the stack frame of 
// functions that call STATIC functions.
//
      void g29_eeprom_dump() ;
      void g29_compare_current_mesh_to_stored_mesh();
      void fine_tune_mesh(const float &lx, const float &ly, const bool do_ubl_mesh_map);
      void smart_fill_mesh();
      void display_map(const int);
      void reset();
//
// Please do not put STATIC qualifiers in front of ANYTHING in this file.   You WILL cause problems by doing that.
// The GCC optimizer inlines static functions and this DRAMATICALLY increases the size of the stack frame of 
// functions that call STATIC functions.
//
      void invalidate();
      void store_state();
      void load_state();
      void store_mesh(const int16_t);
      void load_mesh(const int16_t);
      bool sanity_check();

      static ubl_state state;

      static float z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];

      // 15 is the maximum nubmer of grid points supported + 1 safety margin for now,
      // until determinism prevails
      constexpr static float mesh_index_to_xpos[16] PROGMEM = { UBL_MESH_MIN_X+0*(MESH_X_DIST),
                                UBL_MESH_MIN_X+1*(MESH_X_DIST), UBL_MESH_MIN_X+2*(MESH_X_DIST),
                                UBL_MESH_MIN_X+3*(MESH_X_DIST), UBL_MESH_MIN_X+4*(MESH_X_DIST),
                                UBL_MESH_MIN_X+5*(MESH_X_DIST), UBL_MESH_MIN_X+6*(MESH_X_DIST),
                                UBL_MESH_MIN_X+7*(MESH_X_DIST), UBL_MESH_MIN_X+8*(MESH_X_DIST),
                                UBL_MESH_MIN_X+9*(MESH_X_DIST), UBL_MESH_MIN_X+10*(MESH_X_DIST),
                                UBL_MESH_MIN_X+11*(MESH_X_DIST), UBL_MESH_MIN_X+12*(MESH_X_DIST),
                                UBL_MESH_MIN_X+13*(MESH_X_DIST), UBL_MESH_MIN_X+14*(MESH_X_DIST),
                                UBL_MESH_MIN_X+15*(MESH_X_DIST) };

      constexpr static float mesh_index_to_ypos[16] PROGMEM = { UBL_MESH_MIN_Y+0*(MESH_Y_DIST),
                                UBL_MESH_MIN_Y+1*(MESH_Y_DIST), UBL_MESH_MIN_Y+2*(MESH_Y_DIST),
                                UBL_MESH_MIN_Y+3*(MESH_Y_DIST), UBL_MESH_MIN_Y+4*(MESH_Y_DIST),
                                UBL_MESH_MIN_Y+5*(MESH_Y_DIST), UBL_MESH_MIN_Y+6*(MESH_Y_DIST),
                                UBL_MESH_MIN_Y+7*(MESH_Y_DIST), UBL_MESH_MIN_Y+8*(MESH_Y_DIST),
                                UBL_MESH_MIN_Y+9*(MESH_Y_DIST), UBL_MESH_MIN_Y+10*(MESH_Y_DIST),
                                UBL_MESH_MIN_Y+11*(MESH_Y_DIST), UBL_MESH_MIN_Y+12*(MESH_Y_DIST),
                                UBL_MESH_MIN_Y+13*(MESH_Y_DIST), UBL_MESH_MIN_Y+14*(MESH_Y_DIST),
                                UBL_MESH_MIN_Y+15*(MESH_Y_DIST) };

      static bool g26_debug_flag, has_control_of_lcd_panel;

      static int16_t eeprom_start;    // Please do no change this to 8 bits in size
                                      // It needs to hold values bigger than this.

      static volatile int encoder_diff; // Volatile because it's changed at interrupt time.

      unified_bed_leveling();

//
// Please do not put STATIC qualifiers in front of ANYTHING in this file.   You WILL cause problems by doing that.
// The GCC optimizer inlines static functions and this DRAMATICALLY increases the size of the stack frame of 
// functions that call STATIC functions.
//
      FORCE_INLINE void set_z(const int8_t px, const int8_t py, const float &z) { z_values[px][py] = z; }
        int8_t get_cell_index_x(const float &x) {
        const int8_t cx = (x - (UBL_MESH_MIN_X)) * (1.0 / (MESH_X_DIST));
        return constrain(cx, 0, (GRID_MAX_POINTS_X) - 1);   // -1 is appropriate if we want all movement to the X_MAX
      }                                                     // position. But with this defined this way, it is possible
                                                            // to extrapolate off of this point even further out. Probably
                                                            // that is OK because something else should be keeping that from
                                                            // happening and should not be worried about at this level.
      int8_t get_cell_index_y(const float &y) {
        const int8_t cy = (y - (UBL_MESH_MIN_Y)) * (1.0 / (MESH_Y_DIST));
        return constrain(cy, 0, (GRID_MAX_POINTS_Y) - 1);   // -1 is appropriate if we want all movement to the Y_MAX
      }                                                     // position. But with this defined this way, it is possible
                                                            // to extrapolate off of this point even further out. Probably
                                                            // that is OK because something else should be keeping that from
                                                            // happening and should not be worried about at this level.

//
// Please do not put STATIC qualifiers in front of ANYTHING in this file.   You WILL cause problems by doing that.
// The GCC optimizer inlines static functions and this DRAMATICALLY increases the size of the stack frame of 
// functions that call STATIC functions.
//
      int8_t find_closest_x_index(const float &x) {
        const int8_t px = (x - (UBL_MESH_MIN_X) + (MESH_X_DIST) * 0.5) * (1.0 / (MESH_X_DIST));
        return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1;
      }

      int8_t find_closest_y_index(const float &y) {
        const int8_t py = (y - (UBL_MESH_MIN_Y) + (MESH_Y_DIST) * 0.5) * (1.0 / (MESH_Y_DIST));
        return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1;
      }

      /**
       *                           z2   --|
       *                 z0        |      |
       *                  |        |      + (z2-z1)
       *   z1             |        |      |
       * ---+-------------+--------+--  --|
       *   a1            a0        a2
       *    |<---delta_a---------->|
       *
       *  calc_z0 is the basis for all the Mesh Based correction. It is used to
       *  find the expected Z Height at a position between two known Z-Height locations.
       *
       *  It is fairly expensive with its 4 floating point additions and 2 floating point
       *  multiplications.
       */
      FORCE_INLINE float calc_z0(const float &a0, const float &a1, const float &z1, const float &a2, const float &z2) {
        return z1 + (z2 - z1) * (a0 - a1) / (a2 - a1);
      }
//
// Please do not put STATIC qualifiers in front of ANYTHING in this file.   You WILL cause problems by doing that.
// The GCC optimizer inlines static functions and this DRAMATICALLY increases the size of the stack frame of 
// functions that call STATIC functions.
//

      /**
       * z_correction_for_x_on_horizontal_mesh_line is an optimization for
       * the rare occasion when a point lies exactly on a Mesh line (denoted by index yi).
       */
      inline float z_correction_for_x_on_horizontal_mesh_line(const float &lx0, const int x1_i, const int yi) {
        if (!WITHIN(x1_i, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(yi, 0, GRID_MAX_POINTS_Y - 1)) {
          SERIAL_ECHOPAIR("? in z_correction_for_x_on_horizontal_mesh_line(lx0=", lx0);
          SERIAL_ECHOPAIR(",x1_i=", x1_i);
          SERIAL_ECHOPAIR(",yi=", yi);
          SERIAL_CHAR(')');
          SERIAL_EOL;
          return NAN;
        }

        const float xratio = (RAW_X_POSITION(lx0) - pgm_read_float(&mesh_index_to_xpos[x1_i])) * (1.0 / (MESH_X_DIST)),
                    z1 = z_values[x1_i][yi];

        return z1 + xratio * (z_values[x1_i + 1][yi] - z1);
      }

      //
      // See comments above for z_correction_for_x_on_horizontal_mesh_line
      //
      inline float z_correction_for_y_on_vertical_mesh_line(const float &ly0, const int xi, const int y1_i) {
        if (!WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(y1_i, 0, GRID_MAX_POINTS_Y - 1)) {
          SERIAL_ECHOPAIR("? in get_z_correction_along_vertical_mesh_line_at_specific_x(ly0=", ly0);
          SERIAL_ECHOPAIR(", x1_i=", xi);
          SERIAL_ECHOPAIR(", yi=", y1_i);
          SERIAL_CHAR(')');
          SERIAL_EOL;
          return NAN;
        }

        const float yratio = (RAW_Y_POSITION(ly0) - pgm_read_float(&mesh_index_to_ypos[y1_i])) * (1.0 / (MESH_Y_DIST)),
                    z1 = z_values[xi][y1_i];

        return z1 + yratio * (z_values[xi][y1_i + 1] - z1);
      }

      /**
       * This is the generic Z-Correction. It works anywhere within a Mesh Cell. It first
       * does a linear interpolation along both of the bounding X-Mesh-Lines to find the
       * Z-Height at both ends. Then it does a linear interpolation of these heights based
       * on the Y position within the cell.
       */
      float get_z_correction(const float &lx0, const float &ly0) {
        const int8_t cx = get_cell_index_x(RAW_X_POSITION(lx0)),
                     cy = get_cell_index_y(RAW_Y_POSITION(ly0));

        if (!WITHIN(cx, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(cy, 0, GRID_MAX_POINTS_Y - 1)) {

          SERIAL_ECHOPAIR("? in get_z_correction(lx0=", lx0);
          SERIAL_ECHOPAIR(", ly0=", ly0);
          SERIAL_CHAR(')');
          SERIAL_EOL;

          #if ENABLED(ULTRA_LCD)
            strcpy(lcd_status_message, "get_z_correction() indexes out of range.");
            lcd_quick_feedback();
          #endif
          return 0.0; // this used to return state.z_offset
        }

        const float z1 = calc_z0(RAW_X_POSITION(lx0),
                                 pgm_read_float(&mesh_index_to_xpos[cx]), z_values[cx][cy],
                                 pgm_read_float(&mesh_index_to_xpos[cx + 1]), z_values[cx + 1][cy]);

        const float z2 = calc_z0(RAW_X_POSITION(lx0),
                                 pgm_read_float(&mesh_index_to_xpos[cx]), z_values[cx][cy + 1],
                                 pgm_read_float(&mesh_index_to_xpos[cx + 1]), z_values[cx + 1][cy + 1]);

        float z0 = calc_z0(RAW_Y_POSITION(ly0),
                           pgm_read_float(&mesh_index_to_ypos[cy]), z1,
                           pgm_read_float(&mesh_index_to_ypos[cy + 1]), z2);

        #if ENABLED(DEBUG_LEVELING_FEATURE)
          if (DEBUGGING(MESH_ADJUST)) {
            SERIAL_ECHOPAIR(" raw get_z_correction(", lx0);
            SERIAL_CHAR(',');
            SERIAL_ECHO(ly0);
            SERIAL_ECHOPGM(") = ");
            SERIAL_ECHO_F(z0, 6);
          }
        #endif

        #if ENABLED(DEBUG_LEVELING_FEATURE)
          if (DEBUGGING(MESH_ADJUST)) {
            SERIAL_ECHOPGM(" >>>---> ");
            SERIAL_ECHO_F(z0, 6);
            SERIAL_EOL;
          }
        #endif

        if (isnan(z0)) { // if part of the Mesh is undefined, it will show up as NAN
          z0 = 0.0;      // in ubl.z_values[][] and propagate through the
                         // calculations. If our correction is NAN, we throw it out
                         // because part of the Mesh is undefined and we don't have the
                         // information we need to complete the height correction.

          #if ENABLED(DEBUG_LEVELING_FEATURE)
            if (DEBUGGING(MESH_ADJUST)) {
              SERIAL_ECHOPAIR("??? Yikes!  NAN in get_z_correction(", lx0);
              SERIAL_CHAR(',');
              SERIAL_ECHO(ly0);
              SERIAL_CHAR(')');
              SERIAL_EOL;
            }
          #endif
        }
        return z0; // there used to be a +state.z_offset on this line
      }

      /**
       * This function sets the Z leveling fade factor based on the given Z height,
       * only re-calculating when necessary.
       *
       *  Returns 1.0 if planner.z_fade_height is 0.0.
       *  Returns 0.0 if Z is past the specified 'Fade Height'.
       */
      #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)

        FORCE_INLINE float fade_scaling_factor_for_z(const float &lz) {
          if (planner.z_fade_height == 0.0) return 1.0;

          static float fade_scaling_factor = 1.0;
          const float rz = RAW_Z_POSITION(lz);
          if (last_specified_z != rz) {
            last_specified_z = rz;
            fade_scaling_factor =
              rz < planner.z_fade_height
                ? 1.0 - (rz * planner.inverse_z_fade_height)
                : 0.0;
          }
          return fade_scaling_factor;
        }

      #endif

  }; // class unified_bed_leveling

  extern unified_bed_leveling ubl;

  #define UBL_LAST_EEPROM_INDEX E2END

#endif // AUTO_BED_LEVELING_UBL
#endif // UNIFIED_BED_LEVELING_H