Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

570 lines
18 KiB

/**
* Marlin 3D Printer Firmware
5 years ago
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
//
// Configuration Menu
//
#include "../../inc/MarlinConfigPre.h"
#if HAS_LCD_MENU
#include "menu_item.h"
#if HAS_FILAMENT_SENSOR
#include "../../feature/runout.h"
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
#include "../../feature/powerloss.h"
#endif
#if HAS_BED_PROBE
#include "../../module/probe.h"
#if ENABLED(BLTOUCH)
#include "../../feature/bltouch.h"
#endif
#endif
#if ENABLED(SOUND_MENU_ITEM)
#include "../../libs/buzzer.h"
#endif
#define HAS_DEBUG_MENU ENABLED(LCD_PROGRESS_BAR_TEST)
void menu_advanced_settings();
#if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION)
void menu_delta_calibrate();
#endif
#if ENABLED(LCD_PROGRESS_BAR_TEST)
#include "../lcdprint.h"
static void progress_bar_test() {
static int8_t bar_percent = 0;
if (ui.use_click()) {
ui.goto_previous_screen();
#if HAS_MARLINUI_HD44780
ui.set_custom_characters(CHARSET_MENU);
#endif
return;
}
bar_percent += (int8_t)ui.encoderPosition;
LIMIT(bar_percent, 0, 100);
ui.encoderPosition = 0;
MenuItem_static::draw(0, GET_TEXT(MSG_PROGRESS_BAR_TEST), SS_DEFAULT|SS_INVERT);
lcd_put_int((LCD_WIDTH) / 2 - 2, LCD_HEIGHT - 2, bar_percent); lcd_put_wchar('%');
lcd_moveto(0, LCD_HEIGHT - 1); ui.draw_progress_bar(bar_percent);
}
void _progress_bar_test() {
ui.goto_screen(progress_bar_test);
#if HAS_MARLINUI_HD44780
ui.set_custom_characters(CHARSET_INFO);
#endif
}
#endif // LCD_PROGRESS_BAR_TEST
#if HAS_DEBUG_MENU
void menu_debug() {
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
#if ENABLED(LCD_PROGRESS_BAR_TEST)
SUBMENU(MSG_PROGRESS_BAR_TEST, _progress_bar_test);
#endif
END_MENU();
}
#endif
#if HAS_MULTI_EXTRUDER
#include "../../module/tool_change.h"
void menu_tool_change() {
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
static constexpr float max_extrude = TERN(PREVENT_LENGTHY_EXTRUDE, EXTRUDE_MAXLENGTH, 500);
#if ENABLED(TOOLCHANGE_PARK)
EDIT_ITEM(bool, MSG_FILAMENT_PARK_ENABLED, &toolchange_settings.enable_park);
#endif
EDIT_ITEM(float3, MSG_FILAMENT_SWAP_LENGTH, &toolchange_settings.swap_length, 0, max_extrude);
EDIT_ITEM(float41sign, MSG_FILAMENT_SWAP_EXTRA, &toolchange_settings.extra_resume, -10, 10);
EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_RETRACT_SPEED, &toolchange_settings.retract_speed, 10, 5400);
EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_UNRETRACT_SPEED, &toolchange_settings.unretract_speed, 10, 5400);
EDIT_ITEM(float3, MSG_FILAMENT_PURGE_LENGTH, &toolchange_settings.extra_prime, 0, max_extrude);
EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_PRIME_SPEED, &toolchange_settings.prime_speed, 10, 5400);
EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_FAN_SPEED, &toolchange_settings.fan_speed, 0, 255);
EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_FAN_TIME, &toolchange_settings.fan_time, 1, 30);
#endif
EDIT_ITEM(float3, MSG_TOOL_CHANGE_ZLIFT, &toolchange_settings.z_raise, 0, 10);
END_MENU();
}
#if ENABLED(TOOLCHANGE_MIGRATION_FEATURE)
#include "../../module/motion.h" // for active_extruder
#include "../../gcode/queue.h"
void menu_toolchange_migration() {
PGM_P const msg_migrate = GET_TEXT(MSG_TOOL_MIGRATION_SWAP);
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
// Auto mode ON/OFF
EDIT_ITEM(bool, MSG_TOOL_MIGRATION_AUTO, &migration.automode);
EDIT_ITEM(uint8, MSG_TOOL_MIGRATION_END, &migration.last, 0, EXTRUDERS - 1);
// Migrate to a chosen extruder
LOOP_L_N(s, EXTRUDERS) {
if (s != active_extruder) {
ACTION_ITEM_N_P(s, msg_migrate, []{
char cmd[12];
sprintf_P(cmd, PSTR("M217 T%i"), int(MenuItemBase::itemIndex));
queue.inject(cmd);
});
}
}
END_MENU();
}
#endif
#endif
#if HAS_HOTEND_OFFSET
#include "../../module/motion.h"
#include "../../gcode/queue.h"
void menu_tool_offsets() {
auto _recalc_offsets = []{
if (active_extruder && all_axes_trusted()) { // For the 2nd extruder re-home so the next tool-change gets the new offsets.
queue.inject_P(G28_STR); // In future, we can babystep the 2nd extruder (if active), making homing unnecessary.
active_extruder = 0;
}
};
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
#if ENABLED(DUAL_X_CARRIAGE)
EDIT_ITEM_FAST_N(float42_52, X_AXIS, MSG_HOTEND_OFFSET_A, &hotend_offset[1].x, float(X2_HOME_POS - 25), float(X2_HOME_POS + 25), _recalc_offsets);
#else
EDIT_ITEM_FAST_N(float42_52, X_AXIS, MSG_HOTEND_OFFSET_A, &hotend_offset[1].x, -99.0, 99.0, _recalc_offsets);
#endif
EDIT_ITEM_FAST_N(float42_52, Y_AXIS, MSG_HOTEND_OFFSET_A, &hotend_offset[1].y, -99.0, 99.0, _recalc_offsets);
EDIT_ITEM_FAST_N(float42_52, Z_AXIS, MSG_HOTEND_OFFSET_A, &hotend_offset[1].z, Z_PROBE_LOW_POINT, 10.0, _recalc_offsets);
#if ENABLED(EEPROM_SETTINGS)
ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
#endif
END_MENU();
}
#endif
#if ENABLED(DUAL_X_CARRIAGE)
void menu_idex() {
const bool need_g28 = axes_should_home(_BV(Y_AXIS)|_BV(Z_AXIS));
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
GCODES_ITEM(MSG_IDEX_MODE_AUTOPARK, PSTR("M605S1\nG28X\nG1X0"));
GCODES_ITEM(MSG_IDEX_MODE_DUPLICATE, need_g28
? PSTR("M605S1\nT0\nG28\nM605S2\nG28X\nG1X0") // If Y or Z is not homed, do a full G28 first
: PSTR("M605S1\nT0\nM605S2\nG28X\nG1X0")
);
GCODES_ITEM(MSG_IDEX_MODE_MIRRORED_COPY, need_g28
? PSTR("M605S1\nT0\nG28\nM605S2\nG28X\nG1X0\nM605S3") // If Y or Z is not homed, do a full G28 first
: PSTR("M605S1\nT0\nM605S2\nG28 X\nG1X0\nM605S3")
);
GCODES_ITEM(MSG_IDEX_MODE_FULL_CTRL, PSTR("M605S0\nG28X"));
EDIT_ITEM(float42_52, MSG_IDEX_DUPE_GAP, &duplicate_extruder_x_offset, (X2_MIN_POS) - (X1_MIN_POS), (X_BED_SIZE) - 20);
END_MENU();
}
#endif
#if ENABLED(BLTOUCH)
#if ENABLED(BLTOUCH_LCD_VOLTAGE_MENU)
void bltouch_report() {
SERIAL_ECHOLNPGM("EEPROM Last BLTouch Mode - ", bltouch.last_written_mode);
SERIAL_ECHOLNPGM("Configuration BLTouch Mode - " TERN(BLTOUCH_SET_5V_MODE, "5V", "OD"));
char mess[21];
strcpy_P(mess, PSTR("BLTouch Mode - "));
strcpy_P(&mess[15], bltouch.last_written_mode ? PSTR("5V") : PSTR("OD"));
ui.set_status(mess);
ui.return_to_status();
}
#endif
void menu_bltouch() {
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
ACTION_ITEM(MSG_BLTOUCH_RESET, bltouch._reset);
ACTION_ITEM(MSG_BLTOUCH_SELFTEST, bltouch._selftest);
ACTION_ITEM(MSG_BLTOUCH_DEPLOY, bltouch._deploy);
ACTION_ITEM(MSG_BLTOUCH_STOW, bltouch._stow);
ACTION_ITEM(MSG_BLTOUCH_SW_MODE, bltouch._set_SW_mode);
#if ENABLED(BLTOUCH_LCD_VOLTAGE_MENU)
CONFIRM_ITEM(MSG_BLTOUCH_5V_MODE, MSG_BLTOUCH_5V_MODE, MSG_BUTTON_CANCEL, bltouch._set_5V_mode, nullptr, GET_TEXT(MSG_BLTOUCH_MODE_CHANGE));
CONFIRM_ITEM(MSG_BLTOUCH_OD_MODE, MSG_BLTOUCH_OD_MODE, MSG_BUTTON_CANCEL, bltouch._set_OD_mode, nullptr, GET_TEXT(MSG_BLTOUCH_MODE_CHANGE));
ACTION_ITEM(MSG_BLTOUCH_MODE_STORE, bltouch._mode_store);
CONFIRM_ITEM(MSG_BLTOUCH_MODE_STORE_5V, MSG_BLTOUCH_MODE_STORE_5V, MSG_BUTTON_CANCEL, bltouch.mode_conv_5V, nullptr, GET_TEXT(MSG_BLTOUCH_MODE_CHANGE));
CONFIRM_ITEM(MSG_BLTOUCH_MODE_STORE_OD, MSG_BLTOUCH_MODE_STORE_OD, MSG_BUTTON_CANCEL, bltouch.mode_conv_OD, nullptr, GET_TEXT(MSG_BLTOUCH_MODE_CHANGE));
ACTION_ITEM(MSG_BLTOUCH_MODE_ECHO, bltouch_report);
#endif
END_MENU();
}
#endif
#if ENABLED(TOUCH_MI_PROBE)
void menu_touchmi() {
ui.defer_status_screen();
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
GCODES_ITEM(MSG_TOUCHMI_INIT, PSTR("M851 Z0\nG28\nG1 F200 Z0"));
SUBMENU(MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset);
GCODES_ITEM(MSG_TOUCHMI_SAVE, PSTR("M500\nG1 F200 Z10"));
GCODES_ITEM(MSG_TOUCHMI_ZTEST, PSTR("G28\nG1 F200 Z0"));
END_MENU();
}
#endif
#if ENABLED(CONTROLLER_FAN_MENU)
#include "../../feature/controllerfan.h"
void menu_controller_fan() {
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
EDIT_ITEM_FAST(percent, MSG_CONTROLLER_FAN_IDLE_SPEED, &controllerFan.settings.idle_speed, _MAX(1, CONTROLLERFAN_SPEED_MIN) - 1, 255);
EDIT_ITEM(bool, MSG_CONTROLLER_FAN_AUTO_ON, &controllerFan.settings.auto_mode);
if (controllerFan.settings.auto_mode) {
EDIT_ITEM_FAST(percent, MSG_CONTROLLER_FAN_SPEED, &controllerFan.settings.active_speed, _MAX(1, CONTROLLERFAN_SPEED_MIN) - 1, 255);
EDIT_ITEM(uint16_4, MSG_CONTROLLER_FAN_DURATION, &controllerFan.settings.duration, 0, 4800);
}
END_MENU();
}
#endif
#if ENABLED(FWRETRACT)
#include "../../feature/fwretract.h"
void menu_config_retract() {
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
#if ENABLED(FWRETRACT_AUTORETRACT)
EDIT_ITEM(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract);
#endif
EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT, &fwretract.settings.retract_length, 0, 100);
#if HAS_MULTI_EXTRUDER
EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.settings.swap_retract_length, 0, 100);
#endif
EDIT_ITEM(float3, MSG_CONTROL_RETRACTF, &fwretract.settings.retract_feedrate_mm_s, 1, 999);
EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_ZHOP, &fwretract.settings.retract_zraise, 0, 999);
EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.settings.retract_recover_extra, -100, 100);
#if HAS_MULTI_EXTRUDER
EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.settings.swap_retract_recover_extra, -100, 100);
#endif
EDIT_ITEM(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.settings.retract_recover_feedrate_mm_s, 1, 999);
#if HAS_MULTI_EXTRUDER
EDIT_ITEM(float3, MSG_CONTROL_RETRACT_RECOVER_SWAPF, &fwretract.settings.swap_retract_recover_feedrate_mm_s, 1, 999);
#endif
END_MENU();
}
#endif
#if HAS_PREHEAT && DISABLED(SLIM_LCD_MENUS)
void _menu_configuration_preheat_settings() {
#define _MINTEMP_ITEM(N) HEATER_##N##_MINTEMP,
#define _MAXTEMP_ITEM(N) HEATER_##N##_MAXTEMP,
#define MINTEMP_ALL _MIN(REPEAT(HOTENDS, _MINTEMP_ITEM) 999)
#define MAXTEMP_ALL _MAX(REPEAT(HOTENDS, _MAXTEMP_ITEM) 0)
const uint8_t m = MenuItemBase::itemIndex;
START_MENU();
STATIC_ITEM_P(ui.get_preheat_label(m), SS_DEFAULT|SS_INVERT);
BACK_ITEM(MSG_CONFIGURATION);
#if HAS_FAN
editable.uint8 = uint8_t(ui.material_preset[m].fan_speed);
EDIT_ITEM_N(percent, m, MSG_FAN_SPEED, &editable.uint8, 0, 255, []{ ui.material_preset[MenuItemBase::itemIndex].fan_speed = editable.uint8; });
#endif
#if HAS_TEMP_HOTEND
EDIT_ITEM(int3, MSG_NOZZLE, &ui.material_preset[m].hotend_temp, MINTEMP_ALL, MAXTEMP_ALL - (HOTEND_OVERSHOOT));
#endif
#if HAS_HEATED_BED
EDIT_ITEM(int3, MSG_BED, &ui.material_preset[m].bed_temp, BED_MINTEMP, BED_MAX_TARGET);
#endif
#if ENABLED(EEPROM_SETTINGS)
ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
#endif
END_MENU();
}
#endif
#if ENABLED(CUSTOM_MENU_CONFIG)
void _lcd_custom_menus_configuration_gcode(FSTR_P const fstr) {
queue.inject(fstr);
TERN_(CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK, ui.completion_feedback());
TERN_(CUSTOM_MENU_CONFIG_SCRIPT_RETURN, ui.return_to_status());
}
void custom_menus_configuration() {
START_MENU();
BACK_ITEM(MSG_MAIN);
#define HAS_CUSTOM_ITEM_CONF(N) (defined(CONFIG_MENU_ITEM_##N##_DESC) && defined(CONFIG_MENU_ITEM_##N##_GCODE))
#ifdef CUSTOM_MENU_CONFIG_SCRIPT_DONE
#define _DONE_SCRIPT "\n" CUSTOM_MENU_CONFIG_SCRIPT_DONE
#else
#define _DONE_SCRIPT ""
#endif
#define GCODE_LAMBDA_CONF(N) []{ _lcd_custom_menus_configuration_gcode(F(CONFIG_MENU_ITEM_##N##_GCODE _DONE_SCRIPT)); }
#define _CUSTOM_ITEM_CONF(N) ACTION_ITEM_P(PSTR(CONFIG_MENU_ITEM_##N##_DESC), GCODE_LAMBDA_CONF(N));
#define _CUSTOM_ITEM_CONF_CONFIRM(N) \
SUBMENU_P(PSTR(CONFIG_MENU_ITEM_##N##_DESC), []{ \
MenuItem_confirm::confirm_screen( \
GCODE_LAMBDA_CONF(N), \
ui.goto_previous_screen, \
PSTR(CONFIG_MENU_ITEM_##N##_DESC "?") \
); \
})
#define CUSTOM_ITEM_CONF(N) do{ \
constexpr char c = CONFIG_MENU_ITEM_##N##_GCODE[strlen(CONFIG_MENU_ITEM_##N##_GCODE) - 1]; \
static_assert(c != '\n' && c != '\r', "CONFIG_MENU_ITEM_" STRINGIFY(N) "_GCODE cannot have a newline at the end. Please remove it."); \
if (ENABLED(CONFIG_MENU_ITEM_##N##_CONFIRM)) \
_CUSTOM_ITEM_CONF_CONFIRM(N); \
else \
_CUSTOM_ITEM_CONF(N); \
}while(0)
#if HAS_CUSTOM_ITEM_CONF(1)
CUSTOM_ITEM_CONF(1);
#endif
#if HAS_CUSTOM_ITEM_CONF(2)
CUSTOM_ITEM_CONF(2);
#endif
#if HAS_CUSTOM_ITEM_CONF(3)
CUSTOM_ITEM_CONF(3);
#endif
#if HAS_CUSTOM_ITEM_CONF(4)
CUSTOM_ITEM_CONF(4);
#endif
#if HAS_CUSTOM_ITEM_CONF(5)
CUSTOM_ITEM_CONF(5);
#endif
#if HAS_CUSTOM_ITEM_CONF(6)
CUSTOM_ITEM_CONF(6);
#endif
#if HAS_CUSTOM_ITEM_CONF(7)
CUSTOM_ITEM_CONF(7);
#endif
#if HAS_CUSTOM_ITEM_CONF(8)
CUSTOM_ITEM_CONF(8);
#endif
#if HAS_CUSTOM_ITEM_CONF(9)
CUSTOM_ITEM_CONF(9);
#endif
#if HAS_CUSTOM_ITEM_CONF(10)
CUSTOM_ITEM_CONF(10);
#endif
#if HAS_CUSTOM_ITEM_CONF(11)
CUSTOM_ITEM_CONF(11);
#endif
#if HAS_CUSTOM_ITEM_CONF(12)
CUSTOM_ITEM_CONF(12);
#endif
#if HAS_CUSTOM_ITEM_CONF(13)
CUSTOM_ITEM_CONF(13);
#endif
#if HAS_CUSTOM_ITEM_CONF(14)
CUSTOM_ITEM_CONF(14);
#endif
#if HAS_CUSTOM_ITEM_CONF(15)
CUSTOM_ITEM_CONF(15);
#endif
#if HAS_CUSTOM_ITEM_CONF(16)
CUSTOM_ITEM_CONF(16);
#endif
#if HAS_CUSTOM_ITEM_CONF(17)
CUSTOM_ITEM_CONF(17);
#endif
#if HAS_CUSTOM_ITEM_CONF(18)
CUSTOM_ITEM_CONF(18);
#endif
#if HAS_CUSTOM_ITEM_CONF(19)
CUSTOM_ITEM_CONF(19);
#endif
#if HAS_CUSTOM_ITEM_CONF(20)
CUSTOM_ITEM_CONF(20);
#endif
#if HAS_CUSTOM_ITEM_CONF(21)
CUSTOM_ITEM_CONF(21);
#endif
#if HAS_CUSTOM_ITEM_CONF(22)
CUSTOM_ITEM_CONF(22);
#endif
#if HAS_CUSTOM_ITEM_CONF(23)
CUSTOM_ITEM_CONF(23);
#endif
#if HAS_CUSTOM_ITEM_CONF(24)
CUSTOM_ITEM_CONF(24);
#endif
#if HAS_CUSTOM_ITEM_CONF(25)
CUSTOM_ITEM_CONF(25);
#endif
END_MENU();
}
#endif // CUSTOM_MENU_CONFIG
void menu_configuration() {
const bool busy = printer_busy();
START_MENU();
BACK_ITEM(MSG_MAIN);
//
// Debug Menu when certain options are enabled
//
#if HAS_DEBUG_MENU
SUBMENU(MSG_DEBUG_MENU, menu_debug);
#endif
#if ENABLED(CUSTOM_MENU_CONFIG)
if (TERN1(CUSTOM_MENU_CONFIG_ONLY_IDLE, !busy)) {
#ifdef CUSTOM_MENU_CONFIG_TITLE
SUBMENU_P(PSTR(CUSTOM_MENU_CONFIG_TITLE), custom_menus_configuration);
#else
SUBMENU(MSG_CUSTOM_COMMANDS, custom_menus_configuration);
#endif
}
#endif
SUBMENU(MSG_ADVANCED_SETTINGS, menu_advanced_settings);
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
SUBMENU(MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset);
#elif HAS_BED_PROBE
EDIT_ITEM(LCD_Z_OFFSET_TYPE, MSG_ZPROBE_ZOFFSET, &probe.offset.z, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
#endif
//
// Set Fan Controller speed
//
#if ENABLED(CONTROLLER_FAN_MENU)
SUBMENU(MSG_CONTROLLER_FAN, menu_controller_fan);
#endif
if (!busy) {
#if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION)
SUBMENU(MSG_DELTA_CALIBRATE, menu_delta_calibrate);
#endif
#if HAS_HOTEND_OFFSET
SUBMENU(MSG_OFFSETS_MENU, menu_tool_offsets);
#endif
#if ENABLED(DUAL_X_CARRIAGE)
SUBMENU(MSG_IDEX_MENU, menu_idex);
#endif
#if ENABLED(BLTOUCH)
SUBMENU(MSG_BLTOUCH, menu_bltouch);
#endif
#if ENABLED(TOUCH_MI_PROBE)
SUBMENU(MSG_TOUCHMI_PROBE, menu_touchmi);
#endif
}
//
// Set single nozzle filament retract and prime length
//
#if HAS_MULTI_EXTRUDER
SUBMENU(MSG_TOOL_CHANGE, menu_tool_change);
#if ENABLED(TOOLCHANGE_MIGRATION_FEATURE)
SUBMENU(MSG_TOOL_MIGRATION, menu_toolchange_migration);
#endif
#endif
#if HAS_LCD_BRIGHTNESS
EDIT_ITEM_FAST(uint8, MSG_BRIGHTNESS, &ui.brightness, LCD_BRIGHTNESS_MIN, LCD_BRIGHTNESS_MAX, ui.refresh_brightness, true);
#endif
#if HAS_LCD_CONTRAST
EDIT_ITEM_FAST(uint8, MSG_CONTRAST, &ui.contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, ui.refresh_contrast, true);
#endif
#if ENABLED(FWRETRACT)
SUBMENU(MSG_RETRACT, menu_config_retract);
#endif
#if HAS_FILAMENT_SENSOR
EDIT_ITEM(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset);
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
EDIT_ITEM(bool, MSG_OUTAGE_RECOVERY, &recovery.enabled, recovery.changed);
#endif
// Preheat configurations
#if HAS_PREHEAT && DISABLED(SLIM_LCD_MENUS)
LOOP_L_N(m, PREHEAT_COUNT)
SUBMENU_N_S(m, ui.get_preheat_label(m), MSG_PREHEAT_M_SETTINGS, _menu_configuration_preheat_settings);
#endif
#if ENABLED(SOUND_MENU_ITEM)
EDIT_ITEM(bool, MSG_SOUND, &ui.buzzer_enabled, []{ ui.chirp(); });
#endif
#if ENABLED(EEPROM_SETTINGS)
ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
if (!busy) ACTION_ITEM(MSG_LOAD_EEPROM, ui.load_settings);
#endif
if (!busy) ACTION_ITEM(MSG_RESTORE_DEFAULTS, ui.reset_settings);
END_MENU();
}
#endif // HAS_LCD_MENU