Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
daid303 587154c01b Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up. 12 years ago
..
Gen7 Fix Gen7 compile if you have avr-libc version 1.7.1 or higher. See http://code.google.com/p/arduino/issues/detail?id=604 12 years ago
Sanguino Fixed compiler warning for Sanguino compile 13 years ago
hardware/tools/avr/etc ATMega1284P support for Arduino IDE 13 years ago
COPYING first commit 13 years ago
Configuration.h Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1 12 years ago
ConfigurationStore.cpp Fixed #317 12 years ago
ConfigurationStore.h Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 12 years ago
Configuration_adv.h Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up. 12 years ago
LCD Menu Tree.pdf Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included. 12 years ago
LiquidCrystalRus.cpp First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 12 years ago
LiquidCrystalRus.h Enables support the Cyrillic alphabet for LCD 12 years ago
Makefile Some fixes in the Makefile to support Arduino 1.0.0 or higher and added the Rambo. Still needs some more work for the different arduino hardware variants. 12 years ago
Marlin.h Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 12 years ago
Marlin.pde Mistake there, not sure why I did that. My bad. 12 years ago
MarlinSerial.cpp Make serial port configurable. 12 years ago
MarlinSerial.h Clean up special serial port cases 12 years ago
Marlin_main.cpp The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message. 12 years ago
Menu Plans.xlsx Tidy up 12 years ago
Sd2Card.cpp Fix for a few -Wextra warnings. 12 years ago
Sd2Card.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 13 years ago
Sd2PinMap.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 13 years ago
SdBaseFile.cpp Few simple fixes that save RAM, as static strings are stored in RAM by default. 12 years ago
SdBaseFile.h Added long filename support. 12 years ago
SdFatConfig.h Added long filename support. 12 years ago
SdFatStructs.h Added long filename support. 12 years ago
SdFatUtil.cpp Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0. 13 years ago
SdFatUtil.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 13 years ago
SdFile.cpp First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 12 years ago
SdFile.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 13 years ago
SdInfo.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 13 years ago
SdVolume.cpp made sd code only compile with SDSUPPORT defined. safes 10k of codespace 13 years ago
SdVolume.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 13 years ago
cardreader.cpp Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 12 years ago
cardreader.h Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 12 years ago
createTemperatureLookupMarlin.py Added new temperature lookup table creation tool. This one uses stein hart-hart equations. 12 years ago
create_speed_lookuptable.py Added 20MHz support. 13 years ago
fastio.h Header multiple include protection should match the filename, not just _ARDUINO_H, which is almost bound to go wrong some day. 12 years ago
language.h I hope last changes to french translation 12 years ago
motion_control.cpp software_endstops: use *_MIN_POS and *_MAX_POS for arcs 12 years ago
motion_control.h Removed interrupt nesting in the stepper ISR. 13 years ago
pins.h Fix for keypad 12 years ago
planner.cpp Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 12 years ago
planner.h Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer. 13 years ago
speed_lookuptable.h Made the 2nd speed lookup table condition more explicit. 12 years ago
stepper.cpp The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message. 12 years ago
stepper.h Few simple fixes that save RAM, as static strings are stored in RAM by default. 12 years ago
temperature.cpp Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up. 12 years ago
temperature.h Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up. 12 years ago
thermistortables.h allow marlin internal 0°C represenation 12 years ago
ultralcd.cpp Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 12 years ago
ultralcd.h Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 12 years ago
watchdog.cpp Fix compiling the watchdog error message when the manual reset watchdog is used. 12 years ago
watchdog.h First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 12 years ago
wiring.h add wiring.h, that can be used to overwrite: 13 years ago