..
COPYING
first commit
14 years ago
Configuration.h
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
12 years ago
ConfigurationStore.cpp
Fixed #317
12 years ago
ConfigurationStore.h
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
12 years ago
Configuration_adv.h
Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
12 years ago
LCD Menu Tree.pdf
Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.
13 years ago
LiquidCrystalRus.cpp
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
12 years ago
LiquidCrystalRus.h
Enables support the Cyrillic alphabet for LCD
12 years ago
Makefile
Use linker "--relax" option.
12 years ago
Marlin.h
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
Marlin.pde
Mistake there, not sure why I did that. My bad.
12 years ago
MarlinSerial.cpp
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
12 years ago
MarlinSerial.h
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
12 years ago
Marlin_main.cpp
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
Menu Plans.xlsx
Tidy up
13 years ago
Sd2Card.cpp
Fix for a few -Wextra warnings.
12 years ago
Sd2Card.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
13 years ago
Sd2PinMap.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
13 years ago
SdBaseFile.cpp
Few simple fixes that save RAM, as static strings are stored in RAM by default.
12 years ago
SdBaseFile.h
Added long filename support.
13 years ago
SdFatConfig.h
Added long filename support.
13 years ago
SdFatStructs.h
Added long filename support.
13 years ago
SdFatUtil.cpp
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
13 years ago
SdFatUtil.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
13 years ago
SdFile.cpp
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
12 years ago
SdFile.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
13 years ago
SdInfo.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
13 years ago
SdVolume.cpp
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
13 years ago
SdVolume.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
13 years ago
cardreader.cpp
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
cardreader.h
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
createTemperatureLookupMarlin.py
Added new temperature lookup table creation tool. This one uses stein hart-hart equations.
12 years ago
create_speed_lookuptable.py
Added 20MHz support.
13 years ago
fastio.h
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
12 years ago
language.h
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
motion_control.cpp
software_endstops: use *_MIN_POS and *_MAX_POS for arcs
13 years ago
motion_control.h
Removed interrupt nesting in the stepper ISR.
13 years ago
pins.h
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
12 years ago
planner.cpp
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
12 years ago
planner.h
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
13 years ago
speed_lookuptable.h
Made the 2nd speed lookup table condition more explicit.
12 years ago
stepper.cpp
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
stepper.h
Few simple fixes that save RAM, as static strings are stored in RAM by default.
12 years ago
temperature.cpp
One more fix for #338, I really should get a heated bed to test with.
12 years ago
temperature.h
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
12 years ago
thermistortables.h
Fixed #336
12 years ago
ultralcd.cpp
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
ultralcd.h
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
ultralcd_implementation_hitachi_HD44780.h
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
watchdog.cpp
Fix compiling the watchdog error message when the manual reset watchdog is used.
12 years ago
watchdog.h
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
12 years ago
wiring.h
add wiring.h, that can be used to overwrite:
13 years ago
Kevin O'Connor
16fbb455ef