Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Erik van der Zalm	ed951b1977	Fixed RAMPS 1.2 support (Found and fixed by rrhb)	13 years ago
Erik van der Zalm	b4833d55c2	Fixed HOME_POS in combination with G28 X0 or G28 Y0	13 years ago
Erik van der Zalm	c6f2ec3c82	remove stop_heating_wait	13 years ago
Erik van der Zalm	b48d67ce10	Fixed homing	13 years ago
Phil Hord	b65ef8d66c	Add support for upcoming Gen7 v1.4 V1.4 moves thermistor power to the always-on 5v line. The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer needed on this board. Add a new motherboard type to support this feature.	13 years ago
Phil Hord	740f0c7690	Add explicit #define for bogus temp override The code to ignore the "bad thermistor reading failsafe" suicide function depends on the existing of the PS_ON pin feature. But in some boards this shouldn't be the case Fix this by adding an explicit definition to make our intentions more clear and separable.	13 years ago
Phil Hord	ba8500a236	pins.h: Define Z_MAX_PIN for Gen7 board The Z_MAX_PIN value was defined as no-value, but this causes the compile to fail. Fix this by setting the Z_MAX_PIN to the correct value (which happens to be 0 for pin PB0/DIO0/0).	13 years ago
Phil Hord	09469add55	Add board reset reporting (from Repetier-Firmware)	13 years ago
Phil Hord	f3101e96d9	Add suitable .gitignore to avoid build noise	13 years ago
Phil Hord	245dca4bee	Makefile: generic pde=>cpp rule This adds flexibility to the makefile by allowing different pde targets to be specified for different needs.	13 years ago
Erik van der Zalm	97d42ca2b2	SDSUPPORT default disabled	13 years ago
Changwoo Ryu	7b14953c99	Fix build on Sanguino based boards with ATmega1284P	13 years ago
Daid	286d5003fa	Fixed compiler warning for Sanguino compile	13 years ago
Erik van der Zalm	27f595a444	Changed version => RC2	13 years ago
Erik van der Zalm	018c567abf	Moved SLOWDOWN function. (jetty840) Included AD595 calibration options. (daid)	13 years ago
Erik van der Zalm	ce714fe306	Fixes in pins.h	13 years ago
Erik van der Zalm	35e57bf149	Added gen6 deluxe.	13 years ago
Erik van der Zalm	84ea2d61e8	Moved gen7 boards to motherboard type 10, 11 and 12. Split ramps1.3 in Sprinter like config and multiextruder config.	13 years ago
Guillaume Seguin	adc108d79e	Correctly build the produced applet/Marlin.cpp source	13 years ago
Erik van der Zalm	5aa9c41ab1	Changed comment mode for detection. Added M221 extuder multiply factor.	13 years ago
Erik van der Zalm	00690f7ffd	Fix cast warning in Gen7	13 years ago
Erik van der Zalm	01d28c18ab	Fixed casting warning in sanguino	13 years ago
Blair Thompson	2fd8c248fe	Added Fan control to the pre-heat settings. I find that the PID routine works better when the cooling fan is switched on at the beginning of a warm up routine. Otherwise when you enable the fan just before a print, you have a delay as the PIDre-adjusts. This should also be safer as most cooling fans are directed at the hot -ends thermal barrier!	13 years ago
Blair Thompson	d9f2f509d5	Added new menu items under the prepare submenu. Instead of a single pre-heat, now there is pre-heat ABS and PLA options Added defines to the configuration file to adjust preheat temperatures for both	13 years ago
Erik van der Zalm	ae3e7586c6	Added HOME_POS. This adds the posibility to make the center 0 Updated the Xsteps ... settings via the LCD menu	13 years ago
Erik van der Zalm	df1437bd86	Changed display format for some numbers.	13 years ago
Erik van der Zalm	8816ef1c64	Small fixes after merge	13 years ago
Erik van der Zalm	a0a1f81913	various changes	13 years ago
Christian Thalhammer	8a8ea50f33	fixed manual axis movement lcd option	13 years ago
Blair Thompson	b976692d0f	Removed VS project files for tidyness stakes	13 years ago
Blair Thompson	fe940a142d	Added a structure that will allow easy translations/modifications to the LCD menu. Signed-off-by: Blair Thompson <mail@justblair.co.uk>	13 years ago
Christian Thalhammer	b3fb09a20c	change preheat to ABS values of nozzle 227 and be 105 �C next try for manual axis movement	13 years ago
Blair Thompson	a05a261b72	Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card	13 years ago
Blair Thompson	1b6765ed12	Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface	13 years ago
Christian Thalhammer	1ff99ae25f	ATMega1284P support for Arduino IDE replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file	13 years ago
Christian Thalhammer	e661578c84	support for GEN7 1.1,1.2 and 1.3	13 years ago
Daid	73344e69c1	Added temperature offset/gain settings for AD595.	13 years ago
Christian Thalhammer	0e3631ff4b	smaller changes	13 years ago
Erik van der Zalm	fa2e1be0ca	changed default EXTRUDE_MINTEMP to 170.	13 years ago
Erik van der Zalm	7699f250e3	Fixed small merge bug	13 years ago
Erik van der Zalm	b447815de5	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	13 years ago
Erik van der Zalm	bde30b2b48	Corrected e-length calculation in planner	13 years ago
Erik van der Zalm	13e185d330	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	13 years ago
Erik van der Zalm	b58eae7657	Corrected e-length calculation in planner	13 years ago
daid	2a77c84c8f	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	13 years ago
Erik van der Zalm	d47a3e5950	Changed check i mtion_conrol if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001) (thanks mooselake)	13 years ago
Erik van der Zalm	f87c80889f	Fixed M109 timer overflow (reported by triffid)	13 years ago
Erik van der Zalm	154de69c02	Print configuration.h version during startup (thanks hairykiwi)	13 years ago
Erik van der Zalm	6ef8459494	Corrected distance calculation. (thanks jv4779)	13 years ago
Erik van der Zalm	598eb1d4f1	Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)	13 years ago

1 2 3 4 5 ...

280 Commits (ed951b197728d7ec368098877d0f9599523b5a8e)