Browse Source

Added a structure that will allow easy translations/modifications to the LCD menu.

Signed-off-by: Blair Thompson <mail@justblair.co.uk>
pull/1/head
Blair Thompson 13 years ago
parent
commit
fe940a142d
  1. 60
      Marlin/.Marlin.vsarduino.h
  2. BIN
      Marlin/Debug/CL.read.1.tlog
  3. BIN
      Marlin/Debug/CL.write.1.tlog
  4. 2
      Marlin/Debug/Marlin.lastbuildstate
  5. 1042
      Marlin/Debug/Marlin.log
  6. 0
      Marlin/Debug/Marlin.unsuccessfulbuild
  7. BIN
      Marlin/Debug/cl.command.1.tlog
  8. BIN
      Marlin/Debug/vc100.idb
  9. BIN
      Marlin/Debug/vc100.pdb
  10. 1
      Marlin/Marlin.pde
  11. BIN
      Marlin/Marlin.sdf
  12. 20
      Marlin/Marlin.sln
  13. BIN
      Marlin/Marlin.suo
  14. 118
      Marlin/Marlin.vcxproj
  15. 141
      Marlin/Marlin.vcxproj.filters
  16. 3
      Marlin/Marlin.vcxproj.user
  17. BIN
      Marlin/ipch/marlin-7ce658c4/marlin-4b8a948f.ipch
  18. 318
      Marlin/language.h
  19. 122
      Marlin/ultralcd.pde

60
Marlin/.Marlin.vsarduino.h

@ -0,0 +1,60 @@
#define __AVR_ATmega2560__
#define __cplusplus
#define __builtin_va_list int
#define __attribute__(x)
#define __inline__
#define __asm__(x)
#define ARDUINO 100
extern "C" void __cxa_pure_virtual() {}
#include "C:\arduino-1.0\libraries\LiquidCrystal\LiquidCrystal.h"
#include "C:\arduino-1.0\libraries\LiquidCrystal\LiquidCrystal.cpp"
void enquecommand(const char *cmd);
void setup_photpin();
void setup_powerhold();
void suicide();
void setup();
void loop();
void get_command();
float code_value();
long code_value_long();
bool code_seen(char code_string[]);
bool code_seen(char code);
void process_commands();
void process_commands();
void FlushSerialRequestResend();
void ClearToSend();
void get_coordinates();
void get_arc_coordinates();
void prepare_move();
void prepare_arc_move(char isclockwise);
void manage_inactivity(byte debug);
void kill();
char *createFilename(char *buffer,const dir_t &p);
void lcdProgMemprint(const char *str);
int intround(const float &x);
void lcd_status(const char* message);
void lcd_statuspgm(const char* message);
FORCE_INLINE void clear();
void lcd_init();
void beep();
void beepshort();
void lcd_status();
void buttons_init();
void buttons_check();
char *ftostr3(const float &x);
char *itostr2(const uint8_t &x);
char *ftostr31(const float &x);
char *ftostr32(const float &x);
char *itostr31(const int &xx);
char *itostr3(const int &xx);
char *itostr4(const int &xx);
char *ftostr51(const float &x);
void wd_init();
void wd_reset();
#include "C:\arduino-1.0\hardware\arduino\variants\mega\pins_arduino.h"
#include "C:\arduino-1.0\hardware\arduino\cores\arduino\Arduino.h"
#include "C:\Users\Blair\Desktop\Marlin_v1\Marlin\Marlin.pde"
#include "C:\Users\Blair\Desktop\Marlin_v1\Marlin\cardreader.pde"
#include "C:\Users\Blair\Desktop\Marlin_v1\Marlin\ultralcd.pde"
#include "C:\Users\Blair\Desktop\Marlin_v1\Marlin\watchdog.pde"

BIN
Marlin/Debug/CL.read.1.tlog

Binary file not shown.

BIN
Marlin/Debug/CL.write.1.tlog

Binary file not shown.

2
Marlin/Debug/Marlin.lastbuildstate

@ -0,0 +1,2 @@
#v4.0:v100
Debug|Win32|C:\Users\Blair\Desktop\Marlin_v1\Marlin\|

1042
Marlin/Debug/Marlin.log

File diff suppressed because it is too large

0
Marlin/Debug/Marlin.unsuccessfulbuild

BIN
Marlin/Debug/cl.command.1.tlog

Binary file not shown.

BIN
Marlin/Debug/vc100.idb

Binary file not shown.

BIN
Marlin/Debug/vc100.pdb

Binary file not shown.

1
Marlin/Marlin.pde

@ -35,6 +35,7 @@
#include "cardreader.h"
#include "watchdog.h"
#include "EEPROMwrite.h"
#include "language.h"
#define VERSION_STRING "1.0.0 RC1"

BIN
Marlin/Marlin.sdf

Binary file not shown.

20
Marlin/Marlin.sln

@ -0,0 +1,20 @@

Microsoft Visual Studio Solution File, Format Version 11.00
# Visual Studio 2010
Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Marlin", "Marlin.vcxproj", "{510EF280-9617-4F04-86F4-19F7E48C6FC1}"
EndProject
Global
GlobalSection(SolutionConfigurationPlatforms) = preSolution
Debug|Win32 = Debug|Win32
Release|Win32 = Release|Win32
EndGlobalSection
GlobalSection(ProjectConfigurationPlatforms) = postSolution
{510EF280-9617-4F04-86F4-19F7E48C6FC1}.Debug|Win32.ActiveCfg = Debug|Win32
{510EF280-9617-4F04-86F4-19F7E48C6FC1}.Debug|Win32.Build.0 = Debug|Win32
{510EF280-9617-4F04-86F4-19F7E48C6FC1}.Release|Win32.ActiveCfg = Release|Win32
{510EF280-9617-4F04-86F4-19F7E48C6FC1}.Release|Win32.Build.0 = Release|Win32
EndGlobalSection
GlobalSection(SolutionProperties) = preSolution
HideSolutionNode = FALSE
EndGlobalSection
EndGlobal

BIN
Marlin/Marlin.suo

Binary file not shown.

118
Marlin/Marlin.vcxproj

@ -0,0 +1,118 @@
<?xml version="1.0" encoding="utf-8"?>
<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<ItemGroup Label="ProjectConfigurations">
<ProjectConfiguration Include="Debug|Win32">
<Configuration>Debug</Configuration>
<Platform>Win32</Platform>
</ProjectConfiguration>
<ProjectConfiguration Include="Release|Win32">
<Configuration>Release</Configuration>
<Platform>Win32</Platform>
</ProjectConfiguration>
</ItemGroup>
<PropertyGroup Label="Globals">
<ProjectGuid>{510EF280-9617-4F04-86F4-19F7E48C6FC1}</ProjectGuid>
<RootNamespace>Marlin</RootNamespace>
</PropertyGroup>
<Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
<PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
<ConfigurationType>Application</ConfigurationType>
<UseDebugLibraries>true</UseDebugLibraries>
<CharacterSet>MultiByte</CharacterSet>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
<ConfigurationType>Application</ConfigurationType>
<UseDebugLibraries>false</UseDebugLibraries>
<WholeProgramOptimization>true</WholeProgramOptimization>
<CharacterSet>MultiByte</CharacterSet>
</PropertyGroup>
<Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
<ImportGroup Label="ExtensionSettings">
</ImportGroup>
<ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
<Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
</ImportGroup>
<ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
<Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
</ImportGroup>
<PropertyGroup Label="UserMacros" />
<PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
<IncludePath>C:\arduino-1.0\hardware\arduino\cores\arduino;C:\arduino-1.0\hardware\arduino\variants\mega;c:\arduino-1.0\hardware\tools\avr\avr\include\;c:\arduino-1.0\hardware\tools\avr\avr\include\avr\;c:\arduino-1.0\hardware\tools\avr\avr\;c:\arduino-1.0\hardware\tools\avr\lib\gcc\avr\4.3.2\include\;C:\arduino-1.0\libraries\LiquidCrystal;C:\arduino-1.0\libraries\LiquidCrystal\utility;</IncludePath>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
<IncludePath>C:\arduino-1.0\hardware\arduino\cores\arduino;C:\arduino-1.0\hardware\arduino\variants\mega;c:\arduino-1.0\hardware\tools\avr\avr\include\;c:\arduino-1.0\hardware\tools\avr\avr\include\avr\;c:\arduino-1.0\hardware\tools\avr\avr\;c:\arduino-1.0\hardware\tools\avr\lib\gcc\avr\4.3.2\include\;C:\arduino-1.0\libraries\LiquidCrystal;C:\arduino-1.0\libraries\LiquidCrystal\utility;</IncludePath>
</PropertyGroup>
<ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
<ClCompile>
<WarningLevel>Level3</WarningLevel>
<Optimization>Disabled</Optimization>
</ClCompile>
<Link>
<GenerateDebugInformation>true</GenerateDebugInformation>
</Link>
</ItemDefinitionGroup>
<ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
<ClCompile>
<WarningLevel>Level3</WarningLevel>
<Optimization>MaxSpeed</Optimization>
<FunctionLevelLinking>true</FunctionLevelLinking>
<IntrinsicFunctions>true</IntrinsicFunctions>
</ClCompile>
<Link>
<GenerateDebugInformation>true</GenerateDebugInformation>
<EnableCOMDATFolding>true</EnableCOMDATFolding>
<OptimizeReferences>true</OptimizeReferences>
</Link>
</ItemDefinitionGroup>
<ItemGroup>
<None Include="cardreader.pde" />
<None Include="Marlin.pde" />
<None Include="ultralcd.pde" />
<None Include="watchdog.pde" />
</ItemGroup>
<ItemGroup>
<ClInclude Include=".Marlin.vsarduino.h" />
<ClInclude Include="cardreader.h" />
<ClInclude Include="Configuration.h" />
<ClInclude Include="Configuration_adv.h" />
<ClInclude Include="EEPROMwrite.h" />
<ClInclude Include="fastio.h" />
<ClInclude Include="language.h" />
<ClInclude Include="Marlin.h" />
<ClInclude Include="MarlinSerial.h" />
<ClInclude Include="motion_control.h" />
<ClInclude Include="pins.h" />
<ClInclude Include="planner.h" />
<ClInclude Include="Sd2Card.h" />
<ClInclude Include="Sd2PinMap.h" />
<ClInclude Include="SdBaseFile.h" />
<ClInclude Include="SdFatConfig.h" />
<ClInclude Include="SdFatStructs.h" />
<ClInclude Include="SdFatUtil.h" />
<ClInclude Include="SdFile.h" />
<ClInclude Include="SdInfo.h" />
<ClInclude Include="SdVolume.h" />
<ClInclude Include="speed_lookuptable.h" />
<ClInclude Include="stepper.h" />
<ClInclude Include="temperature.h" />
<ClInclude Include="thermistortables.h" />
<ClInclude Include="ultralcd.h" />
<ClInclude Include="watchdog.h" />
<ClInclude Include="wiring.h" />
</ItemGroup>
<ItemGroup>
<ClCompile Include="MarlinSerial.cpp" />
<ClCompile Include="motion_control.cpp" />
<ClCompile Include="planner.cpp" />
<ClCompile Include="Sd2Card.cpp" />
<ClCompile Include="SdBaseFile.cpp" />
<ClCompile Include="SdFatUtil.cpp" />
<ClCompile Include="SdFile.cpp" />
<ClCompile Include="SdVolume.cpp" />
<ClCompile Include="stepper.cpp" />
<ClCompile Include="temperature.cpp" />
</ItemGroup>
<Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
<ImportGroup Label="ExtensionTargets">
</ImportGroup>
</Project>

141
Marlin/Marlin.vcxproj.filters

@ -0,0 +1,141 @@
<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<ItemGroup>
<Filter Include="Source Files">
<UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
<Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
</Filter>
<Filter Include="Header Files">
<UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
<Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
</Filter>
<Filter Include="Resource Files">
<UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
<Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
</Filter>
</ItemGroup>
<ItemGroup>
<None Include="Marlin.pde" />
<None Include="cardreader.pde" />
<None Include="ultralcd.pde" />
<None Include="watchdog.pde" />
</ItemGroup>
<ItemGroup>
<ClInclude Include=".Marlin.vsarduino.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="cardreader.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="Configuration.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="Configuration_adv.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="EEPROMwrite.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="fastio.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="Marlin.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="MarlinSerial.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="motion_control.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="pins.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="planner.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="Sd2Card.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="Sd2PinMap.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="SdBaseFile.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="SdFatConfig.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="SdFatStructs.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="SdFatUtil.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="SdFile.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="SdInfo.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="SdVolume.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="speed_lookuptable.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="stepper.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="temperature.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="thermistortables.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="ultralcd.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="watchdog.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="wiring.h">
<Filter>Header Files</Filter>
</ClInclude>
<ClInclude Include="language.h">
<Filter>Header Files</Filter>
</ClInclude>
</ItemGroup>
<ItemGroup>
<ClCompile Include="MarlinSerial.cpp">
<Filter>Source Files</Filter>
</ClCompile>
<ClCompile Include="motion_control.cpp">
<Filter>Source Files</Filter>
</ClCompile>
<ClCompile Include="planner.cpp">
<Filter>Source Files</Filter>
</ClCompile>
<ClCompile Include="Sd2Card.cpp">
<Filter>Source Files</Filter>
</ClCompile>
<ClCompile Include="SdBaseFile.cpp">
<Filter>Source Files</Filter>
</ClCompile>
<ClCompile Include="SdFatUtil.cpp">
<Filter>Source Files</Filter>
</ClCompile>
<ClCompile Include="SdFile.cpp">
<Filter>Source Files</Filter>
</ClCompile>
<ClCompile Include="SdVolume.cpp">
<Filter>Source Files</Filter>
</ClCompile>
<ClCompile Include="stepper.cpp">
<Filter>Source Files</Filter>
</ClCompile>
<ClCompile Include="temperature.cpp">
<Filter>Source Files</Filter>
</ClCompile>
</ItemGroup>
</Project>

3
Marlin/Marlin.vcxproj.user

@ -0,0 +1,3 @@
<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
</Project>

BIN
Marlin/ipch/marlin-7ce658c4/marlin-4b8a948f.ipch

Binary file not shown.

318
Marlin/language.h

@ -0,0 +1,318 @@
#ifndef LANGUAGE_H
#define LANGUAGE_H
// Languages
// 1 Custom (For you to add your own messages)
// 2 English
// 3 French (Waiting translation)
// 4 German (Waiting translation)
// 5 Etc
#define LANGUAGE_CHOICE 1 // Pick your language from the list above
#if LANGUAGE_CHOICE == 1
// LCD Menu Messages
#define WELCOME_MSG "RepRap Ready."
#define MSG_SD_INSERTED "Card Ready"
#define MSG_SD_REMOVED "Card Initiate"
#define MSG_MAIN " Main \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Disable Steppers"
#define MSG_AUTO_HOME " Auto Home"
#define MSG_SET_ORIGIN " Set Origin"
#define MSG_PREHEAT " Preheat"
#define MSG_COOLDOWN " Cooldown"
#define MSG_EXTRUDE " Extrude"
#define MSG_SPEED " Speed:"
#define MSG_NOZZLE " \002Nozzle:"
#define MSG_BED " \002Bed:"
#define MSG_FAN_SPEED " Fan speed:"
#define MSG_FLOW " Flow:"
#define MSG_CONTROL " Control \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP " Autotemp:"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-retract:"
#define MSG_ESTEPS " Esteps/mm:"
#define MSG_MAIN_WIDE " Main \003"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_MOTION_WIDE " Motion \x7E"
#define MSG_STORE_EPROM " Store EPROM"
#define MSG_LOAD_EPROM " Load EPROM"
#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
#define MSG_REFRESH "\004Refresh"
#define MSG_WATCH " Watch \003"
#define MSG_PREPARE " Prepare \x7E"
#define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_TUNE " Tune \x7E"
#define MSG_STOP_PRINT " Stop Print \x7E"
#define MSG_CARD_MENU " Card Menu \x7E"
#define MSG_NO_CARD " No Card"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
#endif
#if LANGUAGE_CHOICE == 2
// LCD Menu Messages
#define WELCOME_MSG "UltiMARLIN Ready."
#define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN " Main \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Disable Steppers"
#define MSG_AUTO_HOME " Auto Home"
#define MSG_SET_ORIGIN " Set Origin"
#define MSG_PREHEAT " Preheat"
#define MSG_COOLDOWN " Cooldown"
#define MSG_EXTRUDE " Extrude"
#define MSG_SPEED " Speed:"
#define MSG_NOZZLE " \002Nozzle:"
#define MSG_BED " \002Bed:"
#define MSG_FAN_SPEED " Fan speed:"
#define MSG_FLOW " Flow:"
#define MSG_CONTROL " Control \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP " Autotemp:"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-retract:"
#define MSG_ESTEPS " Esteps/mm:"
#define MSG_MAIN_WIDE " Main \003"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_MOTION_WIDE " Motion \x7E"
#define MSG_STORE_EPROM " Store EPROM"
#define MSG_LOAD_EPROM " Load EPROM"
#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
#define MSG_REFRESH "\004Refresh"
#define MSG_WATCH " Watch \003"
#define MSG_PREPARE " Prepare \x7E"
#define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_TUNE " Tune \x7E"
#define MSG_STOP_PRINT " Stop Print \x7E"
#define MSG_CARD_MENU " Card Menu \x7E"
#define MSG_NO_CARD " No Card"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
#endif
#if LANGUAGE_CHOICE == 3
// LCD Menu Messages
#define WELCOME_MSG "RepRap Ready."
#define MSG_SD_INSERTED "Card Ready"
#define MSG_SD_REMOVED "Card Initiate"
#define MSG_MAIN " Main \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Disable Steppers"
#define MSG_AUTO_HOME " Auto Home"
#define MSG_SET_ORIGIN " Set Origin"
#define MSG_PREHEAT " Preheat"
#define MSG_COOLDOWN " Cooldown"
#define MSG_EXTRUDE " Extrude"
#define MSG_SPEED " Speed:"
#define MSG_NOZZLE " \002Nozzle:"
#define MSG_BED " \002Bed:"
#define MSG_FAN_SPEED " Fan speed:"
#define MSG_FLOW " Flow:"
#define MSG_CONTROL " Control \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP " Autotemp:"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-retract:"
#define MSG_ESTEPS " Esteps/mm:"
#define MSG_MAIN_WIDE " Main \003"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_MOTION_WIDE " Motion \x7E"
#define MSG_STORE_EPROM " Store EPROM"
#define MSG_LOAD_EPROM " Load EPROM"
#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
#define MSG_REFRESH "\004Refresh"
#define MSG_WATCH " Watch \003"
#define MSG_PREPARE " Prepare \x7E"
#define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_TUNE " Tune \x7E"
#define MSG_STOP_PRINT " Stop Print \x7E"
#define MSG_CARD_MENU " Card Menu \x7E"
#define MSG_NO_CARD " No Card"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
#endif
#if LANGUAGE_CHOICE == 4
// LCD Menu Messages
#define WELCOME_MSG "RepRap Ready."
#define MSG_SD_INSERTED "Card Ready"
#define MSG_SD_REMOVED "Card Initiate"
#define MSG_MAIN " Main \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Disable Steppers"
#define MSG_AUTO_HOME " Auto Home"
#define MSG_SET_ORIGIN " Set Origin"
#define MSG_PREHEAT " Preheat"
#define MSG_COOLDOWN " Cooldown"
#define MSG_EXTRUDE " Extrude"
#define MSG_SPEED " Speed:"
#define MSG_NOZZLE " \002Nozzle:"
#define MSG_BED " \002Bed:"
#define MSG_FAN_SPEED " Fan speed:"
#define MSG_FLOW " Flow:"
#define MSG_CONTROL " Control \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP " Autotemp:"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-retract:"
#define MSG_ESTEPS " Esteps/mm:"
#define MSG_MAIN_WIDE " Main \003"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_MOTION_WIDE " Motion \x7E"
#define MSG_STORE_EPROM " Store EPROM"
#define MSG_LOAD_EPROM " Load EPROM"
#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
#define MSG_REFRESH "\004Refresh"
#define MSG_WATCH " Watch \003"
#define MSG_PREPARE " Prepare \x7E"
#define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_TUNE " Tune \x7E"
#define MSG_STOP_PRINT " Stop Print \x7E"
#define MSG_CARD_MENU " Card Menu \x7E"
#define MSG_NO_CARD " No Card"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
#endif
#if LANGUAGE_CHOICE == 5
// LCD Menu Messages
#define WELCOME_MSG "RepRap Ready."
#define MSG_SD_INSERTED "Card Ready"
#define MSG_SD_REMOVED "Card Initiate"
#define MSG_MAIN " Main \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Disable Steppers"
#define MSG_AUTO_HOME " Auto Home"
#define MSG_SET_ORIGIN " Set Origin"
#define MSG_PREHEAT " Preheat"
#define MSG_COOLDOWN " Cooldown"
#define MSG_EXTRUDE " Extrude"
#define MSG_SPEED " Speed:"
#define MSG_NOZZLE " \002Nozzle:"
#define MSG_BED " \002Bed:"
#define MSG_FAN_SPEED " Fan speed:"
#define MSG_FLOW " Flow:"
#define MSG_CONTROL " Control \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP " Autotemp:"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-retract:"
#define MSG_ESTEPS " Esteps/mm:"
#define MSG_MAIN_WIDE " Main \003"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_MOTION_WIDE " Motion \x7E"
#define MSG_STORE_EPROM " Store EPROM"
#define MSG_LOAD_EPROM " Load EPROM"
#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
#define MSG_REFRESH "\004Refresh"
#define MSG_WATCH " Watch \003"
#define MSG_PREPARE " Prepare \x7E"
#define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_TUNE " Tune \x7E"
#define MSG_STOP_PRINT " Stop Print \x7E"
#define MSG_CARD_MENU " Card Menu \x7E"
#define MSG_NO_CARD " No Card"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
#endif
#endif // ifndef LANGUAGE_H

122
Marlin/ultralcd.pde

@ -122,7 +122,7 @@ void lcd_init()
lcd.createChar(3,uplevel);
lcd.createChar(4,refresh);
lcd.createChar(5,folder);
LCD_MESSAGEPGM("UltiMarlin ready.");
LCD_MESSAGEPGM(WELCOME_MSG);
}
@ -464,25 +464,25 @@ void MainMenu::showPrepare()
switch(i)
{
case ItemP_exit:
MENUITEM( lcdprintPGM(" Main \003") , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
break;
case ItemP_autostart:
MENUITEM( lcdprintPGM(" Autostart") , BLOCK;card.lastnr=0;card.setroot();card.checkautostart(true);beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_AUTOSTART) , BLOCK;card.lastnr=0;card.setroot();card.checkautostart(true);beepshort(); ) ;
break;
case ItemP_disstep:
MENUITEM( lcdprintPGM(" Disable Steppers") , BLOCK;enquecommand("M84");beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_DISABLE_STEPPERS) , BLOCK;enquecommand("M84");beepshort(); ) ;
break;
case ItemP_home:
MENUITEM( lcdprintPGM(" Auto Home") , BLOCK;enquecommand("G28 X-105 Y-105 Z0");beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_AUTO_HOME) , BLOCK;enquecommand("G28 X-105 Y-105 Z0");beepshort(); ) ;
break;
case ItemP_origin:
MENUITEM( lcdprintPGM(" Set Origin") , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
break;
case ItemP_preheat:
MENUITEM( lcdprintPGM(" Preheat") , BLOCK;setTargetHotend0(170);setTargetBed(70);beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_PREHEAT) , BLOCK;setTargetHotend0(170);setTargetBed(70);beepshort(); ) ;
break;
case ItemP_cooldown:
MENUITEM( lcdprintPGM(" Cooldown") , BLOCK;setTargetHotend0(0);setTargetBed(0);beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_COOLDOWN) , BLOCK;setTargetHotend0(0);setTargetBed(0);beepshort(); ) ;
break;
case ItemP_extrude:
MENUITEM( lcdprintPGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ;
@ -513,13 +513,13 @@ void MainMenu::showTune()
switch(i)
{
case ItemT_exit:
MENUITEM( lcdprintPGM(" Main \003") , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
break;
case ItemT_speed:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Speed:");
lcd.setCursor(0,line);lcdprintPGM(MSG_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(feedmultiply));
}
@ -554,7 +554,7 @@ void MainMenu::showTune()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" \002Nozzle:");
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0())));
}
@ -588,7 +588,7 @@ void MainMenu::showTune()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" \002Bed:");
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed())));
}
@ -659,7 +659,7 @@ void MainMenu::showTune()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Flow:");
lcd.setCursor(0,line);lcdprintPGM(MSG_FLOW);
lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3]));
}
@ -740,13 +740,13 @@ void MainMenu::showControlTemp()
switch(i)
{
case ItemCT_exit:
MENUITEM( lcdprintPGM(" Control \003") , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
break;
case ItemCT_nozzle:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" \002Nozzle:");
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0())));
}
@ -781,7 +781,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" \002 Min:");
lcd.setCursor(0,line);lcdprintPGM(MSG_MIN);
lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_min));
}
@ -815,7 +815,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" \002 Max:");
lcd.setCursor(0,line);lcdprintPGM(MSG_MAX);
lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_max));
}
@ -849,7 +849,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" \002 Fact:");
lcd.setCursor(0,line);lcdprintPGM(MSG_FACTOR);
lcd.setCursor(13,line);lcd.print(ftostr32(autotemp_factor));
}
@ -883,12 +883,12 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Autotemp:");
lcd.setCursor(0,line);lcdprintPGM(MSG_AUTOTEMP);
lcd.setCursor(13,line);
if(autotemp_enabled)
lcdprintPGM("On");
lcdprintPGM(MSG_ON);
else
lcdprintPGM("Off");
lcdprintPGM(MSG_OFF);
}
if((activeline!=line) )
@ -899,9 +899,9 @@ void MainMenu::showControlTemp()
autotemp_enabled=!autotemp_enabled;
lcd.setCursor(13,line);
if(autotemp_enabled)
lcdprintPGM("On ");
lcdprintPGM(MSG_ON);
else
lcdprintPGM("Off");
lcdprintPGM(MSG_OFF);
BLOCK;
}
@ -912,7 +912,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" \002Bed:");
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed())));
}
@ -946,7 +946,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Fan speed:");
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(fanpwm));
}
@ -1016,7 +1016,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" PID-I: ");
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_I);
lcd.setCursor(13,line);lcd.print(ftostr51(Ki/PID_dT));
}
@ -1051,7 +1051,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" PID-D: ");
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_D);
lcd.setCursor(13,line);lcd.print(itostr4(Kd*PID_dT));
}
@ -1088,7 +1088,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" PID-C: ");
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_C);
lcd.setCursor(13,line);lcd.print(itostr3(Kc));
}
@ -1154,13 +1154,13 @@ void MainMenu::showControlMotion()
switch(i)
{
case ItemCM_exit:
MENUITEM( lcdprintPGM(" Control \003") , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
break;
case ItemCM_acc:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Acc:");
lcd.setCursor(0,line);lcdprintPGM(MSG_ACC);
lcd.setCursor(13,line);lcd.print(itostr3(acceleration/100));lcdprintPGM("00");
}
@ -1194,7 +1194,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Vxy-jerk: ");
lcd.setCursor(0,line);lcdprintPGM(MSG_VXY_JERK);
lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk));
}
@ -1233,11 +1233,11 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Vmax ");
if(i==ItemCM_vmaxx)lcdprintPGM("x:");
if(i==ItemCM_vmaxy)lcdprintPGM("y:");
if(i==ItemCM_vmaxz)lcdprintPGM("z:");
if(i==ItemCM_vmaxe)lcdprintPGM("e:");
lcd.setCursor(0,line);lcdprintPGM(MSG_VMAX);
if(i==ItemCM_vmaxx)lcdprintPGM(MSG_X);
if(i==ItemCM_vmaxy)lcdprintPGM(MSG_Y);
if(i==ItemCM_vmaxz)lcdprintPGM(MSG_Z);
if(i==ItemCM_vmaxe)lcdprintPGM(MSG_E);
lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemCM_vmaxx]));
}
@ -1273,7 +1273,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Vmin:");
lcd.setCursor(0,line);lcdprintPGM(MSG_VMIN);
lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate));
}
@ -1308,7 +1308,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" VTrav min:");
lcd.setCursor(0,line);lcdprintPGM(MSG_VTRAV_MIN);
lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate));
}
@ -1348,10 +1348,10 @@ void MainMenu::showControlMotion()
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Amax ");
if(i==ItemCM_amaxx)lcdprintPGM("x:");
if(i==ItemCM_amaxy)lcdprintPGM("y:");
if(i==ItemCM_amaxz)lcdprintPGM("z:");
if(i==ItemCM_amaxe)lcdprintPGM("e:");
if(i==ItemCM_amaxx)lcdprintPGM(MSG_X);
if(i==ItemCM_amaxy)lcdprintPGM(MSG_Y);
if(i==ItemCM_amaxz)lcdprintPGM(MSG_Z);
if(i==ItemCM_amaxe)lcdprintPGM(MSG_E);
lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100));lcdprintPGM("00");
}
@ -1385,7 +1385,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" A-retract:");
lcd.setCursor(0,line);lcdprintPGM(MSG_A_RETRACT);
lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcdprintPGM("00");
}
@ -1420,7 +1420,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Esteps/mm:");
lcd.setCursor(0,line);lcdprintPGM(MSG_ESTEPS);
lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3]));
}
@ -1477,19 +1477,19 @@ void MainMenu::showControl()
switch(i)
{
case ItemC_exit:
MENUITEM( lcdprintPGM(" Main \003") , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_MAIN_WIDE) , BLOCK;status=Main_Menu;beepshort(); ) ;
break;
case ItemC_temp:
MENUITEM( lcdprintPGM(" Temperature \x7E") , BLOCK;status=Sub_TempControl;beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_TEMPERATURE_WIDE) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
break;
case ItemC_move:
MENUITEM( lcdprintPGM(" Motion \x7E") , BLOCK;status=Sub_MotionControl;beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_MOTION_WIDE) , BLOCK;status=Sub_MotionControl;beepshort(); ) ;
break;
case ItemC_store:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Store EPROM");
lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
}
if((activeline==line) && CLICKED)
{
@ -1503,7 +1503,7 @@ void MainMenu::showControl()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Load EPROM");
lcd.setCursor(0,line);lcdprintPGM(MSG_LOAD_EPROM);
}
if((activeline==line) && CLICKED)
{
@ -1517,7 +1517,7 @@ void MainMenu::showControl()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Restore Failsafe");
lcd.setCursor(0,line);lcdprintPGM(MSG_RESTORE_FAILSAFE);
}
if((activeline==line) && CLICKED)
{
@ -1564,7 +1564,7 @@ void MainMenu::showSD()
switch(i)
{
case 0:
MENUITEM( lcdprintPGM(" Main \003") , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
break;
// case 1:
// {
@ -1595,7 +1595,7 @@ void MainMenu::showSD()
// }
// }break;
case 1:
MENUITEM( lcd.print(" ");card.getWorkDirName();if(card.filename[0]=='/') lcdprintPGM("\004Refresh");else {lcd.print("\005");lcd.print(card.filename);lcd.print("/..");} , BLOCK;card.updir();enforceupdate=true;lineoffset=0;beepshort(); ) ;
MENUITEM( lcd.print(" ");card.getWorkDirName();if(card.filename[0]=='/') lcdprintPGM(MSG_REFRESH);else {lcd.print("\005");lcd.print(card.filename);lcd.print("/..");} , BLOCK;card.updir();enforceupdate=true;lineoffset=0;beepshort(); ) ;
break;
default:
@ -1682,14 +1682,14 @@ void MainMenu::showMainMenu()
switch(line)
{
case ItemM_watch:
MENUITEM( lcdprintPGM(" Watch \003") , BLOCK;status=Main_Status;beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_WATCH) , BLOCK;status=Main_Status;beepshort(); ) ;
break;
case ItemM_prepare:
MENUITEM( if(!tune) lcdprintPGM(" Prepare \x7E");else lcdprintPGM(" Tune \x7E"); , BLOCK;status=Main_Prepare;beepshort(); ) ;
MENUITEM( if(!tune) lcdprintPGM(MSG_PREPARE);else lcdprintPGM(MSG_TUNE); , BLOCK;status=Main_Prepare;beepshort(); ) ;
break;
case ItemM_control:
MENUITEM( lcdprintPGM(" Control \x7E") , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( lcdprintPGM(MSG_CONTROL_ARROW) , BLOCK;status=Main_Control;beepshort(); ) ;
break;
#ifdef SDSUPPORT
case ItemM_file:
@ -1704,13 +1704,13 @@ void MainMenu::showMainMenu()
#endif
{
if(card.sdprinting)
lcdprintPGM(" Stop Print \x7E");
lcdprintPGM(MSG_STOP_PRINT);
else
lcdprintPGM(" Card Menu \x7E");
lcdprintPGM(MSG_CARD_MENU);
}
else
{
lcdprintPGM(" No Card");
lcdprintPGM(MSG_NO_CARD);
}
}
#ifdef CARDINSERTED
@ -1730,7 +1730,7 @@ void MainMenu::showMainMenu()
#endif
default:
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Something is wrong in the MenuStructure.");
SERIAL_ERRORLNPGM(MSG_SERIAL_ERROR_MENU_STRUCTURE);
break;
}
}
@ -1751,12 +1751,12 @@ void MainMenu::update()
if(CARDINSERTED)
{
card.initsd();
LCD_MESSAGEPGM("Card inserted");
LCD_MESSAGEPGM(MSG_SD_INSERTED);
}
else
{
card.release();
LCD_MESSAGEPGM("Card removed");
LCD_MESSAGEPGM(MSG_SD_REMOVED);
}
}
#endif

Loading…
Cancel
Save