1a5293c2ce
Prevents MINTEMP / MAXTEMP when no heaters present
This commit checks whether or not HEATER_0 is in use, and if not, skips
the MIN / MAX temperature checks.
9 years ago
bf04a92cc0
Draw content in display loop only when needed
Example for splash screen.
9 years ago
9865318f1c
Disable splash-screen when done once
Splash screen was shown with every display init.
That means every time the menus where entered.
Note the 2 in the initialisation.
The buffer is already written in two steps a 512 byte.
Without the 2 only the upper half is shown.
9 years ago
53eb662908
Have the configurator read from MarlinFirmware repo
9 years ago
d24ea7c03f
Added Comment in hope of github seeing these updates
9 years ago
61de6ecd54
Added change to example Configuration.h's
9 years ago
2f0081bbb5
Compile error fix! Fix for merge artifacts.
9 years ago
0e6514e7bd
Bug fix! Missed putting z value back in right slot after zigzag mod.
9 years ago
b02a55e60f
Fixed scara directions
Config said for a delta instead of for a scara
9 years ago
340d165a9c
Reduce display updates for dogm displays
In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set.
'lcd_status_update_delay'-loop was not effective in function
lcd_status_screen().
The loop prevented the update of the status screen but not the displays
update.
Shifted the loop into lcd_update().
9 years ago
418d22d7b3
Revert "Testloop cleanup"
This reverts commit 6361404b91
9 years ago
6361404b91
Testloop cleanup
Shifted condition should still be in.
9 years ago
6d4b3f0d6a
Move the condition before the loop
Result see: https://youtu.be/AEnBzdu9_tk
Dot is moving not so fast -> less executed loops.
9 years ago
4cb7dfc546
Move the 'alive dot' in every displayloop
Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g
Loop is executed several times per display update.
9 years ago
b0f198c153
heater_index above its use
9 years ago
60f8e0386f
More thermal runaway states
9 years ago
f9dbd73652
Fix tr_target_temperature type - float!
9 years ago
61f8394361
Compare indices instead of floats for probe actions
9 years ago
4119738e69
Deferring default definition made #undef unnecessary
9 years ago
6f06d33be5
Fix missing refresh_cmd_timeout function
9 years ago
2d099a2c70
Fix missing backslash in macro
9 years ago
0935084141
Fix manage_inactivity
- Document `manage_inactivity` function
- Allow `EXTRUDER_RUNOUT_PREVENT` to work with all extruders
- Use faster `memcpy` for copying coordinates
9 years ago
c065da52ec
Spacing and spelling
9 years ago
ab11f90da0
Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has
a couple commented lines for switching Z_MIN_PIN if needed.
9 years ago
8680b515b0
Fix missing tmp_extruder -> target_extruder
9 years ago
a6ba40ae48
Compiling error temperature.cpp with multiple extruders defined
It wouldn't compile because of this line in temperature.cpp it turns out
it was just a stray ( that didn't line up with the previous lines so I
just made it in line with the rest and it compiled fine.
9 years ago
fc3c76fc16
Fix #1800
9 years ago
1e5c18bb14
Add code_value_short and SERIAL_CHAR
9 years ago
e0d4368cb5
Minor code cleanup, move NUM_AXIS out of config
9 years ago
84e4edaea7
Add M48 comment for #1794
9 years ago
9ba55baa5b
Track target temperature separately for each heater
9 years ago
528e32a1d4
Fix timeout in thermal_runaway when temperature is set higher
9 years ago
b98ebd517e
disable / enable_all_steppers functions
9 years ago
abd7fc36b6
Fix probe height at G28 start
9 years ago
a469d796e1
Add cleanups needed for #1772
9 years ago
92119d0f7d
Static delta[] for SCARA
9 years ago
007a4bd421
Adjust spacing in view function
9 years ago
424d5495e4
Add PIDTEMPBED to EEPROM
9 years ago
6b919e14c1
Group all universal variables
9 years ago
0e8182bbf2
Additional pin tests, cleanup
9 years ago
45565b680d
second wrong feedrate
9 years ago
581b2aae04
fix feedrate for homing z
max_feedrate is in mm/s. line_to_destination needs a feedrate in mm/min because there is feedrate/60.
9 years ago
ccdaea51ba
Add KosselPro
9 years ago
f4599143eb
Allow M115 to better reflect the build
10 years ago
34c7d45879
Hook for Auto-generated Build Version
The automatic versioning system extracts a
build version number from the SCM system
That versioning information is written to the file
_Version.h, a file that is NOT preserved in the SCM.
If such a file will be present,
we include it here to utilize the parameters
that are defined therein.
10 years ago
c756b4cf07
Comment tweak
9 years ago
23cd54755f
Fix typo in Marlin_main.cpp
related to current_position[Z_AXIS] and retract_zlift.
'+ =' -> '+='
Fix for #1786
9 years ago
e96df67630
Clarify thermal_runaway_protection
- Add comments documenting `thermal_runaway_protection`
- Add an enum for the thermal runaway states
- Add macros for temperature helper functions
- Fix a glitch with the z probe sled in homeaxis
9 years ago
59994bd519
Not doing network admin work, pin not ping... :)
9 years ago
916f59e35f
Spaces not tabs in language.h.
Catch unlikely but possible error and head crash when using
Z_PROBE_REPEATABILITY_TEST
9 years ago
Richard Miles
AnHardt
Scott Lahteine
Edward Patel
quillford
Richard Wackerbarth
Natealus
Wurstnase
Chris Roadfeldt