Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Erik van der Zalm	ba96059203	add additional dropsegments test	13 years ago
zittix	fbd91ab0b5	Fixes #153 for bad call to abs()	13 years ago
MaikStohn	159ae90874	bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only)	13 years ago
MaikStohn	e48f5aa6a7	fixed typo	13 years ago
MaikStohn	1efe9ab497	changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu	13 years ago
Guan Yang	602c8ee02b	Melzi support	13 years ago
Daid	279d00da9f	Fixed #if for Ultimaker.	13 years ago
Bernhard Kubicek	451f9cc6d1	Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.	13 years ago
Erik de Bruijn	e3fe1f0d00	Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed. Turning off the protection might be beneficial to those who want to do fast and long reversals.	13 years ago
Erik de Bruijn	d88205d89d	Suggestion to improve (TODO), no actual code changed	13 years ago
Erik de Bruijn	5aa80e6c05	Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel"	13 years ago
MaikStohn	b657a18449	Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit `3682d9bd5b`.	13 years ago
MaikStohn	d188ae4c9d	added missing declaration of buttons_init() This is required when moving the buttons_init() function to the lcd_init() function	13 years ago
MaikStohn	3682d9bd5b	magic PROGMEM defines to avoid hundreds of wrong GCC warnings	13 years ago
MaikStohn	032df0b2c6	Moved LCD initialization out of constructor Since the class "MainMenu" was used within a static variable the initialization of the object (constructor call) was done before Arduino library startup. It always caused a crash when using AVRStudio with JTAG debugger (caused from calling the LCD initialization / the lot of I/O work / the stack used during this calls). By moving the LCD_INIT out of the constructor and using an explicit call inside of Arduino setup() implementation immediately fixed all problems and the JTAG debugger runs fine.	13 years ago
MaikStohn	bd1ad7c76a	explicit includes to make it compile with AVRStudio/Eclipse	13 years ago
MaikStohn	060b38de5c	delete obsolete and wrong code "i" runs from 0 to 4 but "add_homeing" array size is 3 only. On the other hand the calculated value gets overwritten by either one of the if choice.	13 years ago
MaikStohn	789ba02d43	fixed typo in comment	13 years ago
Erik van der Zalm	1874cb71a6	Added option to increase the FAN PWM frequency.	13 years ago
Erik van der Zalm	6a5a34e0ff	Small cleanup	13 years ago
Erik van der Zalm	02af69911e	Added temperature window to M109. This is needed for systems with no overshoot PID.	13 years ago
sefi	c27081aa4a	Fix to allow M120/M121	13 years ago
sefi	e11e072eca	adding M120 and 121 for turning on and off the endstops only for homing function	13 years ago
Daid	8e68c6cf89	Show proper temperature for extruder 2	13 years ago
Daid	8503b78876	Added support for 2nd extruder temperature to UltraLCD	13 years ago
Logan Bowers	3eacb4c16d	Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater	13 years ago
Bernhard	e4d2138dbd	reinitialize the lcd, if the SD card is inserted or removed. It seems that LCDs can confused by electrical discharges from time to time. Since a removal or insert of the sd card takes a long time in firmware, just reinitializing the lcd does not hurt. actually, it solves a problem with the UltiControlle	13 years ago
Bernhard	464b755918	added support for the UltiController	13 years ago
Bernhard	44fd8d46d2	fixed quickhome	13 years ago
Bernhard	33bb044d7c	fixed catsting to (int)e in serial error messages. see https://github.com/ErikZalm/Marlin/issues/148	13 years ago
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	13 years ago
Erik van der Zalm	8aee9d51b6	Disabled disable_heater in PID_autotune.	13 years ago
Daid	414408b2d0	Fix for wrong systax in #ifdef.	13 years ago
Michael Moon	77d503fa13	Fix Makefile	13 years ago
Erik van der Zalm	cf7c8c458f	Fixed MAX6675	13 years ago
grrf	03b0850e63	This breaks temperature readout for pronterface!	13 years ago
tgiphil	ad8bc71d3e	- Fixed a typo	13 years ago
Erik van der Zalm	46feae79c6	Fixed typo in arc	13 years ago
Erik van der Zalm	4ca2f336f0	Changed default MINIMUM_PLANNER_SPEED -> 0.05 Fixed small bug in arcs M105 prints now actual_temp/target_temp	13 years ago
Erik van der Zalm	ae0bf8068b	Fixed arc offset.	13 years ago
Erik van der Zalm	0c1b863755	Ignore ":" in comments.	13 years ago
Erik van der Zalm	63aec3c56e	Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart. Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp	13 years ago
Tommy Cheng	520f1a54a8	Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined.	13 years ago
Michel Pollet	5550e893d5	New board variant, Open Motion Controller Open Hardware board currently used by the group build of http://tvrrug.org.uk The board can be found at http://solderpad.com/folknology/open-motion-controller/ Signed-off-by: Michel Pollet <buserror@gmail.com>	13 years ago
Michel Pollet	aa6e6e914e	Makefile: Redone + Removed most explicit pathnames, use the standard make "VPATH" to let make find the files for itself. + Added a "hardware variant" variable that allows compiging Sanguino and Gen7 as well as "generic" arduino. + Allows overriding the MOTHERBOARD define from the Makefile + Removed the 'preprocessor' bit that wasn't needed, now just "include" the files that are needed, since it allows gcc to show the right file/line when displaying error/warnings. + Uses gcc's own dependency generator to generate the .d files, and and include these instead of self-patching the makefile Signed-off-by: Michel Pollet <buserror@gmail.com>	13 years ago
Bernhard	0183e6332a	made prepare->autostart independent of current folder.	13 years ago
Bernhard	1532200435	found error in filenames. One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely	13 years ago
Erik van der Zalm	b985e4a134	Fixed compile errors in ultralcd when no ultra_lcd is selected.	13 years ago
Erik van der Zalm	2e749d60c3	Added DISABLE_MAX_ENDSTOPS	13 years ago
Erik van der Zalm	33f5697888	PPID tune exports more constants.	13 years ago

1 2 3 4 5 ...

500 Commits (e4a5e333efaeede05b041311d05091a6cb9f5b5a)