Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Daid	e9bec9b6fe	Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6)	13 years ago
linagee	fbd282b3ba	Update Marlin/Configuration.h	13 years ago
linagee	2e8c5049c5	Update Marlin/thermistortables.h	13 years ago
linagee	2d0d8e5272	Small correction.	13 years ago
Daid	4d7fe7115f	Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands.	13 years ago
linagee	9e9db65c3f	Update Marlin/thermistortables.h	13 years ago
linagee	bd966ef389	Update Marlin/thermistortables.h	13 years ago
linagee	775da3f103	Added top ratings and extended to ADC=1 for table 3 and 5.	13 years ago
linagee	96a4baa0be	Update Marlin/thermistortables.h	13 years ago
linagee	2aa9f7b131	Update Marlin/thermistortables.h	13 years ago
linagee	c4490f5f3d	Update Marlin/Configuration.h	13 years ago
linagee	dd9144994e	Tested May 19 - It works! Verified with separate thermocouple TM-902C also.	13 years ago
linagee	4c37d0d9f1	Extended range above 250C. (Operating range states up to 300C)	13 years ago
Daid	b59724e42b	Add strigification for extruder amount in M115 report.	13 years ago
Daid	16413bb8f2	Last M401 update, refresh the LCD during an M401 wait.	13 years ago
Daid	b3941fce5c	Update after testing	13 years ago
Daid	d494688565	Do not initialize in the header file.	13 years ago
Daid	516ec90242	Add M401 - Wait for user on LCD button press	13 years ago
linagee	de2ca3b2e8	Grammar correction.	13 years ago
linagee	c2fc466e1b	Update Marlin/Configuration.h	13 years ago
linagee	241f5a4c0e	Update Marlin/thermistortables.h	13 years ago
linagee	9f9f498491	Update Marlin/Configuration.h	13 years ago
Erik van der Zalm	e31bef31ad	Limit PID autotune PWM to PID_MAX	13 years ago
Erik van der Zalm	ba96059203	add additional dropsegments test	13 years ago
zittix	fbd91ab0b5	Fixes #153 for bad call to abs()	13 years ago
MaikStohn	159ae90874	bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only)	13 years ago
MaikStohn	e48f5aa6a7	fixed typo	13 years ago
MaikStohn	1efe9ab497	changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu	13 years ago
Guan Yang	602c8ee02b	Melzi support	13 years ago
Daid	279d00da9f	Fixed #if for Ultimaker.	13 years ago
Bernhard Kubicek	451f9cc6d1	Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.	13 years ago
Erik de Bruijn	e3fe1f0d00	Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed. Turning off the protection might be beneficial to those who want to do fast and long reversals.	13 years ago
Erik de Bruijn	d88205d89d	Suggestion to improve (TODO), no actual code changed	13 years ago
Erik de Bruijn	5aa80e6c05	Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel"	13 years ago
MaikStohn	b657a18449	Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit `3682d9bd5b`.	13 years ago
MaikStohn	d188ae4c9d	added missing declaration of buttons_init() This is required when moving the buttons_init() function to the lcd_init() function	13 years ago
MaikStohn	3682d9bd5b	magic PROGMEM defines to avoid hundreds of wrong GCC warnings	13 years ago
MaikStohn	032df0b2c6	Moved LCD initialization out of constructor Since the class "MainMenu" was used within a static variable the initialization of the object (constructor call) was done before Arduino library startup. It always caused a crash when using AVRStudio with JTAG debugger (caused from calling the LCD initialization / the lot of I/O work / the stack used during this calls). By moving the LCD_INIT out of the constructor and using an explicit call inside of Arduino setup() implementation immediately fixed all problems and the JTAG debugger runs fine.	13 years ago
MaikStohn	bd1ad7c76a	explicit includes to make it compile with AVRStudio/Eclipse	13 years ago
MaikStohn	060b38de5c	delete obsolete and wrong code "i" runs from 0 to 4 but "add_homeing" array size is 3 only. On the other hand the calculated value gets overwritten by either one of the if choice.	13 years ago
MaikStohn	789ba02d43	fixed typo in comment	13 years ago
Erik van der Zalm	1874cb71a6	Added option to increase the FAN PWM frequency.	13 years ago
Erik van der Zalm	6a5a34e0ff	Small cleanup	13 years ago
Erik van der Zalm	02af69911e	Added temperature window to M109. This is needed for systems with no overshoot PID.	13 years ago
sefi	c27081aa4a	Fix to allow M120/M121	13 years ago
sefi	e11e072eca	adding M120 and 121 for turning on and off the endstops only for homing function	13 years ago
Daid	8e68c6cf89	Show proper temperature for extruder 2	13 years ago
Daid	8503b78876	Added support for 2nd extruder temperature to UltraLCD	13 years ago
Logan Bowers	3eacb4c16d	Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater	13 years ago
Bernhard	e4d2138dbd	reinitialize the lcd, if the SD card is inserted or removed. It seems that LCDs can confused by electrical discharges from time to time. Since a removal or insert of the sd card takes a long time in firmware, just reinitializing the lcd does not hurt. actually, it solves a problem with the UltiControlle	13 years ago

... 2 3 4 5 6 ...

585 Commits (ca7acbe6d91ae42eafd5b87c558b53e8c16f2191)