6a61a3c0b4
missing comma in last commit
12 years ago
f0aee4101a
regenerated thermistor table 7
Generated with createTemperatureLookup.py. The old table crapped out at
270C, which was a problem for polycarbonate.
12 years ago
aba67e2449
No bed config for RAMPS
The motherboard 35 is a config without bed with this pins setting :
D8 Extruder
D9 Fan
D10 Controller Fan
12 years ago
6504e96165
Turn off power supply off-load
Disable the high current output and wait a little before to turn off,
because the interrupting capacity of the PSU is unknown.
Could be a function if needed by other.
12 years ago
86bf911139
Toggle menu for PSU from LCD pannel
From the prepare menu, accessible when is not printing, you have the
possibility to turn off the PSU when is on et vice versa.
From the host, you can turn off or turn on the PSU then the menu is
updated accordingly.
From the LCD message, the printer status is reported ready or off
respectively when the PSU is on or off.
12 years ago
7bad72359c
Support encoder click on PANELOLU2 being read through I2C
This change also handles the case where the pause/stop/restart button on
the VIKI is not used. Make LCD I2C buzz sound the same as the normal
buzz (300ms is too long for quick feedback).
12 years ago
1daf2f3256
Number of extruders is not an advanced configuration - it is a basic property.
12 years ago
f1263d3f88
Further reduce code by using precompiler logic
12 years ago
140e095c6e
Add pins for Motherboard variant 64
These definition contain also the definition for the graphics LCD.
12 years ago
b2c1c64fb1
Add Motherboard variant 64 - STB V1.1
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
12 years ago
ceb5ee38af
Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin
12 years ago
8efd4cfd73
fixed merge conflict
12 years ago
b3ebb71704
Merge pull request #408 from STB3/Marlin_with_ATmega1284p_Sanguino_on_023_support
Marlin with ATmega1284p sanguino support under Arduino 023
12 years ago
372e12f83f
Implement automatic extruder/cold-end fan control based on temperature
This change allows fan outputs to automatically turn on/off when the
associated nozzle temperature of an extruder is above/below a threshold
temperature.
Multiple extruders can be assigned to the same pin in which case the fan
will turn on when any selected extruder is above the threshold.
It also makes the M42 command compatible with the M106/M107 command.
The majority of the logic in this change will be evaluated by the
compiler at build time (i.e, low code space requirements).
12 years ago
6beb42cdf6
Attempt to address Bernhard's comments
Refactor configuration to try to make items clearer (what defines a
panel vs what is user changeable).
12 years ago
f991bf23b2
Add bootloader files for ATmega1284/Sanguino
Added the optiboot bootloader, uses only 512kB of FLASH
Includes .hex file is for 20MHz µC Clock and serial speed of 57k6
12 years ago
5bfba7720e
Switched to Sanguino 0023r4
This is the actual Sanguino release for Arduino 023.
It has full ATmega1284p support.
Reference:
https://code.google.com/p/sanguino/downloads/detail?name=Sanguino-0023r4.zip&can=2&q=
12 years ago
a069d30a4b
Add additional Sanguino bard versions to boards.txt
ATmega644P 16MHz, ATmega1284p 8, 16, 20MHz
12 years ago
839bef6d5d
Fix Configuration.h file to not define LCDs be default.
Also fix compile time check in Marlin.pde
12 years ago
1292d735ba
Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575)
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
12 years ago
4eb81a69e6
Only compile the new extruder offset code if you have multiple extruders.
12 years ago
3e9cd334a4
Merge pull request #383 from dob71/jeff
Hotend offset handling for multi-extruder machines
12 years ago
67710df9f3
Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004)
Removed incorrect LiquidCrystal_I2C Library
12 years ago
b6209c86dd
Added import of Wire Library to make I2C LCD support compilable
12 years ago
2b567d1df5
Added I2C port expander support to HD44780
12 years ago
06272f463d
Added Config variables for activating I2C LCDs and setting type and address
12 years ago
83e33bdd26
Added LiquidCrystal_I2C library to ArduinoAddons
12 years ago
de3dec7215
Also show the tune menu when USB printing.
12 years ago
73d41c10b9
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into jeff
Conflicts:
Marlin/language.h
Marlin/thermistortables.h
12 years ago
63da4dc59a
Merge pull request #398 from DanieleSdei/Marlin_v1
Marlin v1, alignment of the Italian language
12 years ago
7eb9811958
Merge pull request #397 from codenamepawel/patch-1
Update Marlin/language.h
12 years ago
82e28851bd
Italian language: SD-Card change and SD-Card init
12 years ago
aed5965ad8
Italian language: remove space and some fix
12 years ago
d360846dd4
Update Marlin/language.h
Update Polish language #define MSG_RESUMING "Wznawiam drukowanie"
12 years ago
2f60e324dc
Fixed #394
12 years ago
5e2abfcdcd
Merge pull request #391 from STB3/Marlin_with_SD-Card_Change_Menu
Add SD-Card change and SD-Card init. for electronics equipped with LCD Display
12 years ago
fa5c45f515
Merge pull request #392 from mfeherpataky/Marlin_v1
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
12 years ago
a0d4e8e78e
Add Messages for SD Card init. & change
12 years ago
bbf0cc1379
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
Fix to a bug that I just introduced - sorry. Forgot about offset of string length.
12 years ago
c8f1fbd9d8
Add SD-Card change and SD-Card init.
Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.
12 years ago
be91fb9b47
Merge pull request #389 from mfeherpataky/Marlin_v1
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
12 years ago
71ddb8dc60
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
Use all available characters in narrow LCDs < 20 characters.
12 years ago
d2c547c407
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.
12 years ago
70871715e4
Added support for extruder offset handling
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
12 years ago
49b2ddc8c1
Cleaned up non-standard characters
12 years ago
f8876a7958
Merge pull request #376 from kintel/skip_longfilenames
Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!
12 years ago
18fcc367d2
Merge pull request #371 from Banjer/Melzi_LED_PIN
Chenged LED_PIN for Melzi boards, added comment about broken versions of...
12 years ago
6b78edf7c5
Merge pull request #374 from kintel/quickstop
compile fix: quickStop() needs stepper.h
12 years ago
19ce90fe02
Added comment about M42 usage (clean)
12 years ago
00fed0a703
Revert "Extended comment explaining M42 usage"
This reverts commit 01541ee64c
12 years ago
whosawhatsis
Nicolas Rossi
Robert F-C
Dirk Eichel
daid
MendelMax
Bob Clough
Denis Bakin
Daniele Sdei
codenamepawel
mfeherpataky
Denis B
Bernhard Kubicek
Bas Spaans