Browse Source

Added Config variables for activating I2C LCDs and setting type and address

pull/1/head
Bob Clough 12 years ago
parent
commit
06272f463d
  1. 15
      Marlin/Configuration.h

15
Marlin/Configuration.h

@ -316,9 +316,9 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
// The GADGETS3D G3D LCD/SD Controller (blue PCB)
// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
// The GADGETS3D G3D LCD/SD Controller (blue PCB)
// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
//#define G3D_PANEL
//automatic expansion
@ -351,6 +351,15 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#endif
#endif
//The LCD is attached via an I2C port expander.
//#define LCD_I2C
#ifdef LCD_I2C
// Port Expander Type - PCF8574 or MCP23008
#define LCD_I2C_TYPE PCF8574
// I2C Address of the port expander
#define LCD_I2C_ADDRESS 0x20
#endif
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
//#define FAST_PWM_FAN

Loading…
Cancel
Save