AnHardt
088e09e052
Add forgotten Marlin_main.cpp
9 years ago
Scott Lahteine
b116c096bd
Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512)
Updates to `set_homing_bump_feedrate`:
- Move the string into Program Memory, reduce length by 31 bytes
- Use an auto to get the divisor, adjust it on error
- Set feedrate once, at the end
9 years ago
Scott Lahteine
469843427d
Reduce code in gcode_M81 (PR#2497)
9 years ago
Scott Lahteine
c66955aaf9
Mark unchanging arrays as const (PR#2494)
The compiler may be able to optimize if it knows an array won’t be
changing.
9 years ago
Scott Lahteine
278aa15301
Add COUNT macro and apply
9 years ago
Scott Lahteine
aac2b9aa9d
Reduce code in gcode_M84 (PR#2492)
`gcode_M84` only needs to call `finishAndDisableSteppers`, which calls
all the other functions.
9 years ago
Scott Lahteine
e83eac312e
Move plan_arc next to prepare_move
9 years ago
Scott Lahteine
5c5936508d
G2/G3 Arcs for Delta
- Update prepare_move_delta to take a target argument
- Add Delta support to plan_arc
9 years ago
Scott Lahteine
3b23ccd366
Patch servos code for move
- Have `Servo::attach` explicitly return -1 if it fails
- Check for -1 in `Servo::move` because `servoIndex` might be 0
- Make `attach` / `detach` calls conditional on `SERVO_LEVELING`
- Move `SERVO_LEVELING` define to `Conditionals.h`
9 years ago
Patrick Bogen
fba4e6241b
Specify print format for reporting invalid tmp_extruder (PR#2465)
9 years ago
AnHardt
d15d869267
Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464)
to make clear - it's not a question but an order.
9 years ago
Scott Lahteine
f209b755a5
Move the Z probe as far as needed to trigger the switch (PR#2461)
9 years ago
Scott Lahteine
0f1df62389
Fixup comments in code_seen
9 years ago
Scott Lahteine
2945eb6650
Call code_seen only once per parameter
9 years ago
Scott Lahteine
db23b9b184
Minor tweak to M204 code (PR#2457)
9 years ago
Scott Lahteine
81d42406b7
Move braces in homeaxis to prevent a hanging else (PR#2451)
9 years ago
AnHardt
ed6598adf5
Corrected Bed Height vs. Bed Topology for verbosity > 3
and cleaned out some tabs.
Everything else is a rebased PR#2017 as proposed by @CptanPanic
9 years ago
brian
62302ceb9e
Add calculation of difference between auto-correct bed level plane, and measured topo map.
9 years ago
AnHardt
49609f6c14
Activate the new servo.move() function
by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp
and removing the old configuration in the ABL part of Configuration.h
9 years ago
Scott Lahteine
87a872e103
Use st_get_position_mm where possible (PR#2411)
9 years ago
Scott Lahteine
2e0da8abdc
Allow N to take a negative argument (PR@2402)
9 years ago
Scott Lahteine
447dbd6fa5
Add STEPPER_RESET_PIN support
9 years ago
Scott Lahteine
6b1b8cb2b3
Also nullify spaces before the checksum asterisk (PR#2409)
9 years ago
Scott Lahteine
4e9d658141
Prevent a hanging SERIAL_ECHO_START in M111
9 years ago
Scott Lahteine
6b494c1535
Use disable_all_heaters in M111
9 years ago
Scott Lahteine
15190d40df
Add extra EOL after M111
9 years ago
AnHardt
d421f5250d
Correct the sign of zprobe_zoffset for G29 (PR#@391)
Sign flipped with #2167 .
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
9 years ago
Scott Lahteine
52fcc743ab
Replace "target" with "destination" in M600 (PR#2374)
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
9 years ago
AnHardt
23c8c5348f
Z-height fix V2b (PR#2351)
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
9 years ago
Todd Swindoll
a111fbbd0a
z-probe offset fix (PR#2361)
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
9 years ago
Scott Lahteine
9682ed455e
Fix comment on M83, add comment to prepare_move
9 years ago
AnHardt
36746143a1
Correct output of M48 (PR#2336)
n_samples is an uint8_t .
Got printouts like:
50 of 2 ...
9 years ago
Scott Lahteine
f6ca5a8da8
Allow "M110 N123" without a checksum
9 years ago
Scott Lahteine
aaad65ff5d
Include a comment documenting M110
9 years ago
Scott Lahteine
862c72b030
Put the mandatory test of gcode_N first
9 years ago
Scott Lahteine
30976f9773
Allow M110 to handle a second N argument
9 years ago
Scott Lahteine
5ccb1c9e7d
Use millis for M600 audio feedback interval
9 years ago
Scott Lahteine
fb16a83b8a
Cleanup M600 documentation comments
9 years ago
Scott Lahteine
97ec224d72
Replace target with destination in M600
9 years ago
Scott Lahteine
4ce9ddbb74
Check the temperature before filament change
9 years ago
AnHardt
722829b058
Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
at least the lcd independent part from Marlin_main.cpp.
9 years ago
schlotzz
1e9cf905c7
Enable ZigZag AutoBedLeveling on Deltas (PR#2273)
ZigZag has been disabled by fault due to do_topography_map
9 years ago
AnHardt
6ab7b560af
Rework buzzing (PR#2296)
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.
Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.
All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.
To do: Check the conditions for the BEEPER-pin in all pin-files.
9 years ago
Scott Lahteine
29122db2fa
Fix ULTRA_LCD spelling in HAS_LCD_BUZZ
9 years ago
Scott Lahteine
e2a4a83586
Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281 )
9 years ago
MagoKimbra
eb81982fcd
Fix error next command in autotune (PR#2274)
Now send only temperature for T or B, but not send OK.
Host interprets the line to show the right temperature, but not in
response to M105 then stop and send commands until it ends the autotune.
9 years ago
AnHardt
55b23c896a
Optimise out_of_range_error() (PR#2265)
by avoiding the strncopy()
9 years ago
AnHardt
45642b7fe8
Respect DISABLE_AXIS settings (PR#2216)
when DEFAULT_STEPPER_DEACTIVE_TIME is over
instead of simply turn off all.
9 years ago
Scott Lahteine
962b107341
Prevent current_command_args from bypassing nul (PR#2270)
9 years ago
Scott Lahteine
ff6081be3a
Parse N[0-9]+[ ]* differently (PR #2263 )
More general solution to skip N[0-9]+[ ]* in the parser as in #2218
9 years ago