Tree: ae3504594c

FB4S_WIFI

FBG5_WIFI

MKS_UI

vanilla_fb_2.0.x

2.0.7.2

2.0.7.2_upd

2.0.8.1

2.0.9.1

2.0.9.2

2.0.9.3

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from 'ae3504594c'

${ noResults }

Commit Graph

319 Commits (ae3504594c8d0a459ffa0d437dc0fea397bfba39)

Author	SHA1	Message	Date
TheLongAndOnly	cedc158106	[2.0.x] Board specific init macro (#11170)	6 years ago
Scott Lahteine	d4795e5b8e	[2.0.x] Tweaks and additions for MAX7219 (#11034)	7 years ago
Simon Jouet	e2aeda61ed	HAL for Espressif ESP32 Wifi	7 years ago
Scott Lahteine	f2c3b0d476	Use bit flags for homed/known	7 years ago
Scott Lahteine	968a5d2e63	Protected pin err for M226	7 years ago
Scott Lahteine	0ca9db7051	Correct HOTENDS for SWITCHING_EXTRUDER	7 years ago
etagle	569df3fc0c	Fix interrupt-based endstop detection - Also implemented real endstop reading on interrupt.	7 years ago
etagle	a11eb50a3e	Refactor and optimize Stepper/Planner Better encapsulation and considerably reduce stepper jitter	7 years ago
GMagician	3c76bda2d8	Fix switching extruder `DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.	7 years ago
Scott Lahteine	35258dd50b	Consistent heating status and status reset Fix #10699	7 years ago
Scott Lahteine	625035a9ce	Fix M301 access to lpq_len (#10714) Co-Authored-By: Zwaubel	7 years ago
Scott Lahteine	306f0f2135	Move Stepper::synchronize to Planner (#10713) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	7 years ago
Scott Lahteine	05fca752d6	Clean up autostart handling	7 years ago
Scott Lahteine	11ab017dd0	Creality3D Power-Loss Recovery	7 years ago
Scott Lahteine	6c7a17dba6	Abort SD printing more safely (#10407) Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.	7 years ago
Chris Pepper	cc6d41e1d3	Use a macro for HAL header redirection (#10380)	7 years ago
Scott Lahteine	56486c5c0e	Apply const to manage_inactivity	7 years ago
Bob-the-Kuhn	902c885782	Switch to TMC2130 compatible hardware SPI & misc (#10299)	7 years ago
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	7 years ago
Scott Lahteine	1cb810ff1c	[2.0.x] Automatically reset stepper timeout (#10179) * Automatically reset stepper timeout in manage_inactivity Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner. * blocks_queued => has_blocks_queued	7 years ago
Eduardo José Tagle	97e8a6ebd9	Various fixes for DUE... (#10152) - Watchdog reset during SD Card initialization. - Move `DebugMonitor` to `DebugMonitor_Due.cpp`. - Since the watchdog is enabled on boot do extra resets during init. - Have `thermalManager` do watchdog reset before its ISR starts to prevent reset. - Ensure that timers are stopped before reprogramming them to address tone issues. - Improve SAM3XE reset when reflashed through the native port.	7 years ago
Scott Lahteine	9fd1016bb1	Trust the bootloader to clear globals	7 years ago
Scott Lahteine	ae39fbd646	Also suppress keepalive with suspend_auto_report	7 years ago
Bob-the-Kuhn	53362b81cc	Tone fixes/changes (#10151)	7 years ago
Scott Lahteine	72281c4ff9	Turn power off in `kill` instead of setting PS_ON to input	7 years ago
Scott Lahteine	0543362b34	Don't init the tone timer if no BEEPER_PIN	7 years ago
Scott Lahteine	317673fec3	Init watchdog last in setup()	7 years ago
Scott Lahteine	eb212ae073	Add suspend_auto_report flag to suppress auto-report	7 years ago
Scott Lahteine	ffbf63e6af	Add HAS_TEMP_SENSOR conditional	7 years ago
Scott Lahteine	36262a0479	Use static classes for job timers (#9938)	7 years ago
Bob-the-Kuhn	025118da3e	Init print_job_timer in setup() instead of "early" (#9937)	7 years ago
TheSFReader	eb079959fb	Report sd card progress [FR] #9751 (#9832) * SD Status auto-report feature Feature Request #9751	7 years ago
Scott Lahteine	cfdcf91df5	Fix compile error with initTone	7 years ago
Scott Lahteine	65519263f4	Fix broken LEVEL_BED_CORNERS Fix #8805	7 years ago
Scott Lahteine	73cd34b121	Finish AUTO_POWER_CONTROL implementation Followup to #9503	7 years ago
Studiodyne	d3ca82d8c2	Support for multiple filament runout sensors	7 years ago
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701) Implemented for LPC1768.	7 years ago
Scott Lahteine	93c0198b2d	Init LCD welcome message programmatically	7 years ago
teemuatlut	5990266724	Init CS pins before loading settings (#9566)	7 years ago
Scott Lahteine	112917cfef	No EXTRUDER_RUNOUT_PREVENT during print	7 years ago
Scott Lahteine	b2f8b4ada5	I2C position encoders update (#9533) Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.	7 years ago
Scott Lahteine	b3f115fa0a	Marlin.ino needs no content (#9506)	7 years ago
Scott Lahteine	b5e92f4f90	[2.0.x] Enable / disable PSU automatically (#9503)	7 years ago
Scott Lahteine	a718f5bdf3	Don't run `M600` on filament runout if the nozzle is cold	7 years ago
Thomas Moore	f7efac57b7	Multi-host support	7 years ago
Scott Lahteine	7541316bb4	Add M701/M702 Filament Load/Unload, M603	7 years ago
Scott Lahteine	9686ffedef	Single pause flag also indicates SD print pause	7 years ago
Scott Lahteine	026e301307	lcd_map_control deps on ULTIPANEL	7 years ago
etagle	33a6fc70e4	Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)	7 years ago
etagle	b6f9c333d4	Adding hooks into the idle loop so HALs can execute 2nd plane tasks, such as serving SD card read/writes requested from the USB MSD layer	7 years ago