chrono
a89d690b77
Merge remote-tracking branch 'upstream/Development' into pr-felix
10 years ago
alexborro
2f3c77b751
Fix decimal places in G29 Bed Equation Coeficients
10 years ago
Scott Lahteine
196db5720e
Merge pull request #1598 from thinkyhead/temp_errors
Fix missing temp_error declarations
10 years ago
Scott Lahteine
e3ca9137b5
Fix missing temp_error declarations
- Fix for #1591 replacing #1595
10 years ago
Scott Lahteine
e4d77a6313
Merge pull request #1554 from 2PrintBeta/Development
Macro indirection for stepper drivers + Support for TMC26X and L6470 Stepper Drivers
10 years ago
alexborro
c0b6075f77
Fix max acceleration limits in planner
The max acceleration limiting was in wrong place.
10 years ago
Bo Herrmannsen
c7067edddf
initial empty change log
10 years ago
alexborro
9157cbd8f3
Add Travel Acceleration and change the M204 options
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).
It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves
I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
10 years ago
alexborro
888cf161bd
fix travel speed option for G29
I forgot to enclousure the variable with #ifdef
10 years ago
alexborro
af63b54562
Add travel speed option to G29 command line
10 years ago
Bo Herrmannsen
749e5b9b84
updated milestone link
10 years ago
Bo Herrmannsen
33fe89f539
removed irc archive link
removed the link as the software i had did not work, nor does anyone hardly use irc chat but just hang out there
10 years ago
alexborro
5bf42066fa
Fix typo in configuration.h
10 years ago
alexborro
8a4b62d081
Set more regular setup in configuration.h
10 years ago
alexborro
60ceca1bc1
Add speed configuration for home-bumping movement
10 years ago
domonoky
d813090d90
Merge remote-tracking branch 'remotes/upstream/Development' into Development
Conflicts:
Marlin/Marlin_main.cpp
Marlin/stepper.cpp
10 years ago
Scott Lahteine
c321c97f35
Merge pull request #1584 from galexander1/stringcleanup
fix a handful of cases where strtod() was cast to int, instead of just using strtol()
10 years ago
Scott Lahteine
0eae9c24bc
Merge pull request #1582 from galexander1/deltaconftypo
fix typo in delta example config introduced in commit 697ee2d
10 years ago
Scott Lahteine
624f23f550
Merge pull request #1575 from Wurstnase/fix-controllerFan
Fix controller fan
10 years ago
Greg Alexander
b9dfa5cad4
use code_value_long() instead of (int)code_value()
10 years ago
Greg Alexander
901b03d020
use strtol() instead of strtod() when an integer value is desired
10 years ago
Greg Alexander
4fba7b084f
fix typo in delta example config introduced in
commit 697ee2dc50
10 years ago
Wurstnase
a5342c942e
Update Marlin_main.cpp
10 years ago
Scott Lahteine
9dccd3a94f
Merge pull request #1579 from thinkyhead/fix_abl_issues
More sanity-checking for ABL
10 years ago
Scott Lahteine
d085725c86
More sanity-checking for ABL
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
10 years ago
Scott Lahteine
ca4b36deda
Merge pull request #1578 from thinkyhead/require_lcd_style
Make sure a ROM is selected for ULTRA_LCD
10 years ago
Scott Lahteine
9eed8c8cf0
Make sure a ROM is selected for ULTRA_LCD
10 years ago
Scott Lahteine
254970c92a
Merge pull request #1570 from C-o-r-E/escape_fix
Fixes gCode handling of comments and escaped characters
10 years ago
Scott Lahteine
d3660d22ae
Merge pull request #1577 from thinkyhead/fix_gcode_g29
Fix compile error in gcode_G29
10 years ago
Scott Lahteine
25dc79f124
Remove M48 credits also
10 years ago
Scott Lahteine
34e51f576f
Fix compile error in gcode_G29
- A redo of #1576 , which missed topo_flag
- Always set verbose_level
10 years ago
Scott Lahteine
bbeb1117d4
Merge pull request #1572 from Wackerbarth/Issue1572
Minor typos in the README
10 years ago
Scott Lahteine
344a12bd10
Merge pull request #1571 from AnHardt/Undubble
Undubble MSG_MIN & MSG MAX
10 years ago
Wurstnase
62bd734612
fix controllerFan() for inverted enable pins
add ```^ !(n_ENABLE_ON)``` for each stepper
10 years ago
Richard Wackerbarth
fd9beb1672
Minor typos in the README
10 years ago
AnHardt
3024f6c706
Undubble MSG_MIN &MSG MAX
10 years ago
Corey C
ba27f90e36
Merge pull request #1 from foosel/C-o-r-E-escape_fix
In-line comments and escaping fixed by foosel
10 years ago
Gina Häußge
63b62d8d4e
Fixed in-line comments and escaping
* "G1 X1 ; test" was not executing "G1 X1" due to never leaving comment mode.
* "M117 Hello \;)" printed "Hello \" to the display due to not replacing serial_char properly.
Tested with the following commands:
* M117 Hello ; test => displays "Hello" on display, ignores "test"
* G1 X1 ; foo => moves 1mm in X, ignores "foo"
* ; test => completely ignored, not even acknowledged
* M117 Hello \;) => displays "Hello ;)" on display
* M117 Hello \\;) => displays "Hello \" on display, ignores ")"
10 years ago
C-o-r-E
99fb1bc3e8
Attempt to resolve #1568 and add basic escape character support
10 years ago
Wurstnase
92ebb7f4c8
Merge pull request #1 from MarlinFirmware/Development
dev pull
10 years ago
Scott Lahteine
273d00353f
Merge pull request #1565 from thinkyhead/gcode_handler_functions
Gcode handlers to inline functions
10 years ago
Scott Lahteine
cdc38aa783
Move gcode handlers into inline functions
10 years ago
Scott Lahteine
94fd8c7555
Merge pull request #1556 from thinkyhead/enhanced_g29
Enhanced G29
10 years ago
Scott Lahteine
6d9e9a6bef
Merge branch 'Development' into enhanced_g29
Latest upstream changes
10 years ago
Scott Lahteine
4db2179f5c
Include 4th extruder support
10 years ago
Scott Lahteine
0e074d4050
Merge pull request #1561 from OhmEye/Development
Fix autoretract
10 years ago
OhmEye
f90a947e65
Fix autoretract
Autoretract was broken, looks like it was overlooked when the retracted flag was updated for multi extruders.
10 years ago
Scott Lahteine
2ef6b3d57a
Fix wrong defines, broken syntax
10 years ago
OhmEye
f3f04e9fd6
Merge pull request #1 from MarlinFirmware/Development
Sync with upstream
10 years ago
Scott Lahteine
08b722b635
Merge pull request #1555 from C-o-r-E/solenoids
Add support for solenoid articulated extruders
10 years ago