2ecfda80ac
Improve support for JTAG/SWD pins reuse ( #11963 )
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
6 years ago
7d5c336c56
Corrections for dylsexic TMC
6 years ago
ad21a4f07b
Tweaks to HAL format and order
6 years ago
b682a1961a
Tweak STM32F7 TMC2660 class
6 years ago
84926b1d5a
HAL general support for DISABLE_JTAG option ( #11211 )
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
6 years ago
ccbd045f02
Fixed warning about comparing signed to unsigned ( #11909 )
6 years ago
c411e7eb0d
[2.0.x] Squelch compiler warnings seen with -Wall ( #11889 )
6 years ago
1718eff54a
Code changes supporting up to 6 extruders
6 years ago
1a6f2b29b8
Add support for Triple-Z steppers/endstops
6 years ago
d783400330
Updates to STM32F7 HAL, for completeness ( #11770 )
6 years ago
f417408df1
[STM32F1] Fix HAL for new PlatformIO ( #11749 )
6 years ago
2a61c9a939
Various fixups to configs, spacing, etc.
6 years ago
6a3207391f
Remove obsolete HAL_timer_restrain
6 years ago
7ecb8b4af5
[2.0.x] Teensy 3.1 and 3.2 support ( #11460 )
6 years ago
a317bb4991
Remove stray tab
6 years ago
ba1919c1eb
HAL tweaks to LPC1768 main
6 years ago
0987ed2a18
Use American English
6 years ago
a77f8c6dd5
Implement servo support for STM32F1 ( #11580 )
Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.
6 years ago
0456caf0ad
Consolidate shared HALs and isolate HAL compile ( #11552 )
6 years ago
dfe18ac633
Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled ( #11583 )
The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.
6 years ago
00d24a8219
Don't call __delay_4cycles for 0 cycle delay - takes a really long time. ( #11586 )
6 years ago
0b2d686160
Fix "SD init fail" problem for STM32F1 ( #11579 )
Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225
6 years ago
b37bfeffeb
[2.0.x] Use the new const functions of the persistentStore api ( #11544 )
6 years ago
5573ef62c6
[2.0.x] PersistentStore update followup ( #11549 )
6 years ago
834ea7fcea
Remove 'const' from PersistentStore::capacity
6 years ago
c64199941e
Compile only selected PIO environment ( #11519 )
6 years ago
5be2559eda
Use flash memory to emulate EEPROM ( #11500 )
Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.
6 years ago
865ee5985f
Followup persistent store with heading, const
6 years ago
6a8b906318
Followup for persistent_store_api.h
6 years ago
66d2b48b59
Update PersistentStore api ( #11538 )
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
6 years ago
15d68cb496
Pre-override of ST7920 delays before HAL.h
6 years ago
244b9a8257
Better fastio 1280/2560 pin list
Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>
6 years ago
624986d423
Ensure ADC conversion is complete before reading ( #11336 )
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.
See: https://github.com/MarlinFirmware/Marlin/issues/11323
6 years ago
fbcdf5eaeb
Simplify stepper driver per-axis selection
6 years ago
64f007580b
Fix some header comments
6 years ago
f38c81cdde
LPC176x: Expand HW SPI class
6 years ago
3b5dec4b13
Add new LPC include folder
6 years ago
d05e832f29
Add STM32F1 support for SD-based EEPROM
6 years ago
1367df2875
Replace double with float, optimize calculation
6 years ago
e7e896e7d7
More tweaks to fastio_Due.h
6 years ago
55f4744e54
[LPC176x] Endstop Interrupts Feature ( #11202 )
Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.
6 years ago
5abf5bc8a7
[LPC176x] Fix Interrupt forward declarations ( #11200 )
6 years ago
5616581eb1
[LPC176x] Update fastio _GET_INPUT, _GET_OUTPUT macros ( #11168 )
6 years ago
8a8eae8d97
Implement more fastio_Due macros ( #11165 )
6 years ago
fc10101b06
Tweaks to fastio_Due.h
6 years ago
ffdbc1f42c
STM32F1: Fix SD card persistent store API ( #11090 )
6 years ago
d86f25ab63
Fix Serial ISR priority for LPC1768
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
6 years ago
99591dc20c
Filter endstops state at all times ( #11066 )
6 years ago
0312c42f9d
[2.0.x] LPC176x Serial cleanup ( #11032 )
6 years ago
c1269c2ec1
Tweak AVR critical section defines
6 years ago
Alexander Amelkin
Scott Lahteine
Marcio Teixeira
Holger Müller
Sam Lane
Ilya Bukhonin
jmz52
Dave Johnson
ghent360
Nils Hasenbanck
Chris Pepper
Andy Shaw
teemuatlut
etagle
Scott Lahteine