54ddc1d417
Simplify DRY RUN (PR#2358)
Elsewhere DRYRUN turns off the heating elements
and ignores constraints on them.
Here, whenever motion is entered into the planner,
if DRY RUN is set, we instantly act as if the E_AXIS
is in the desired final position.
10 years ago
944090c19c
Optimize lsDive logic
10 years ago
417706e578
Include space for the terminating nul in lsDive
10 years ago
f3c1a6b19c
Reduce lsDive stack usage to the minimum
10 years ago
fba4e6241b
Specify print format for reporting invalid tmp_extruder (PR#2465)
10 years ago
d15d869267
Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464)
to make clear - it's not a question but an order.
10 years ago
f209b755a5
Move the Z probe as far as needed to trigger the switch (PR#2461)
10 years ago
0f1df62389
Fixup comments in code_seen
10 years ago
2945eb6650
Call code_seen only once per parameter
10 years ago
b742af2e2a
Move Y_STOP_PIN for Printrboard with SD (PR#2420)
10 years ago
baa9199973
Define extern delta only for delta
10 years ago
77e80ef367
Require extruders for thermal code
10 years ago
3bde4f4855
Require temp sensor for bed thermal protection
10 years ago
82a3ed2f9a
Cleanup and dev notes in Marlin.h
10 years ago
db23b9b184
Minor tweak to M204 code (PR#2457)
10 years ago
81d42406b7
Move braces in homeaxis to prevent a hanging else (PR#2451)
10 years ago
552a327df8
Fix lsDive filename stack overrun (PR#2449)
10 years ago
a6628f12cc
Eliminate the further use of the pin-parameter
10 years ago
8504992e9f
Remove the additional pin variable in Servo.cpp
as sugested by @c-born
inhttps://github.com/MarlinFirmware/Marlin/issues/1885#issuecomment-92618240
10 years ago
ed6598adf5
Corrected Bed Height vs. Bed Topology for verbosity > 3
and cleaned out some tabs.
Everything else is a rebased PR#2017 as proposed by @CptanPanic
10 years ago
62302ceb9e
Add calculation of difference between auto-correct bed level plane, and measured topo map.
10 years ago
de25a48dec
Remove PID examples from preconfigured configs
10 years ago
7456710a1f
Update configs formatting
10 years ago
391386dd94
Update configs for new servo deactivation
10 years ago
5243d8b523
Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default
10 years ago
49609f6c14
Activate the new servo.move() function
by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp
and removing the old configuration in the ABL part of Configuration.h
10 years ago
40b6edcad7
Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h
DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY.
But it will work on all servo moves, not only the probe servo moves.
10 years ago
2ddb2a2be9
Add Servo::move() to servo.cpp
move(pin, angel) - Sequence of attach(pin), write(angel),
if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches.
As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour,
the usual sequence to handle a servo movement is:
attach(pin)
write(angel)
delay(until the servo finished the move)
detache()
Here a function to handle the complete sequence.
10 years ago
8a01e5fb7a
Update Russian translation (PR#2443)
Slightly updated translation.
10 years ago
e83575537a
Compiler defines USBCON for USB devices (PR#2433)
10 years ago
7268d46508
Always calculate extruder temperature PID d term (PR#2432)
10 years ago
87a872e103
Use st_get_position_mm where possible (PR#2411)
10 years ago
2e0da8abdc
Allow N to take a negative argument (PR@2402)
10 years ago
447dbd6fa5
Add STEPPER_RESET_PIN support
10 years ago
a0351bdb73
Remove STEPPER_RESET_FIX option
10 years ago
6b1b8cb2b3
Also nullify spaces before the checksum asterisk (PR#2409)
10 years ago
8e61314323
Use RIGIDBOT_PANEL for consistency with online docs
10 years ago
4b204da3c1
Cleanup of pins_RAMPS_13.h
10 years ago
536f86e896
RigidBot CONTROLLERFAN_PIN in Configuration_adv.h
10 years ago
f068e46661
RigidBoard include for pins.h
10 years ago
9ebcae496d
RIGIDBOARD / RIGIDPANEL
10 years ago
c3c605c658
Move note about LiquidTWI2 to Configuration.h (PR#2406)
10 years ago
4e9d658141
Prevent a hanging SERIAL_ECHO_START in M111
10 years ago
bc0fdbe88e
Use SERIAL_EOL in SERIAL_PROTOCOLLN macros
10 years ago
d78ebbc0e9
Remove unused MSG_OK_B and MSG_OK_T
10 years ago
6b494c1535
Use disable_all_heaters in M111
10 years ago
15190d40df
Add extra EOL after M111
10 years ago
0e1cf78f5c
Remove code for testing if probing range is too small (PR#2390)
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
10 years ago
d421f5250d
Correct the sign of zprobe_zoffset for G29 (PR#@391)
Sign flipped with #2167 .
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
10 years ago
52fcc743ab
Replace "target" with "destination" in M600 (PR#2374)
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
10 years ago
Richard Wackerbarth
Scott Lahteine
Patrick Bogen
AnHardt
brian
mkile
ayberkozgur