757661b299
Toshiba Flash Air Wifi SD card support
9 years ago
fc75e6f92d
Follow-up the PR #3082 , etc
Follow-up the PR #3082
Follow-up the commit 143ad74: unnoticed updates
Fix for commit b0f5ba0: Z offset: -front [of the nozzle] +behind -> Y offset: -front [of the nozzle] +behind
Standardize the writing method: Z-probe, z-probe -> Z Probe
Adjust spacing
9 years ago
22299c13c1
Change link to the document
documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757http://www.marlinfirmware.org/ isn't working.
9 years ago
adb5375a09
Enabling servo usage on boards with PWM current control
Enabling servo usage on boards with PWM current control
timer5 is used by some boards like the Mini Rambo for controlling motor current via PWM, see stepper.cpp.
```cpp
#ifdef MOTOR_CURRENT_PWM_XY_PIN
pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT);
pinMode(MOTOR_CURRENT_PWM_Z_PIN, OUTPUT);
pinMode(MOTOR_CURRENT_PWM_E_PIN, OUTPUT);
digipot_current(0, motor_current_setting[0]);
digipot_current(1, motor_current_setting[1]);
digipot_current(2, motor_current_setting[2]);
//Set timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise)
TCCR5B = (TCCR5B & ~(_BV(CS50) | _BV(CS51) | _BV(CS52))) | _BV(CS50);
#endif
}
```
Using the same timer for controlling servos results in loss of motor control. So use timer4/3 for those boards instead.
[See discussion here.](http://shop.prusa3d.com/forum/software-f13/enabling-auto-leveling-in-firmware-t416-s40.html )
9 years ago
cadded1e21
Merge pull request #3201 from jbrazio/feature/update-hephestos2-default-config
Update the Hephestos 2 default config
9 years ago
04e57e2b5e
Update the Hephestos 2 default config
9 years ago
40c7e5d4e7
Merge pull request #3199 from esenapaj/patch-2
fix spelling
9 years ago
f260e00a72
fix spelling
Thermister -> Thermistor
9 years ago
b1a3a95ad4
Tweak controllerFan to save a cycle or two
9 years ago
04a6924633
Make DISABLE_INACTIVE_X, etc., the same as DISABLE_X (etc.) if missing
9 years ago
15fccd43ee
Fix spacing of an #endif
9 years ago
be08eb6153
Merge pull request #3194 from jbrazio/feature/add-pt_pt-utf8
Add pt_pt-utf8 language pack and fix some minor compiler warnings
9 years ago
d1ff7959b7
Merge pull request #3188 from esenapaj/patch-1
follow-up the commit b82d91e
9 years ago
10caee2b7c
Merge pull request #3187 from AnHardt/target_extruder_number
Fix extrudernum in MSG_INVALID_EXTRUDER
9 years ago
1cc316f1fd
Merge pull request #3082 from thinkyhead/updated_2820
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
9 years ago
7bf5d117e7
Merge pull request #3069 from thinkyhead/rc_delta_compat_m48
Delta-compatible extensions to M48
9 years ago
db8ab50c66
Merge pull request #3192 from tnw513/fix_lang
Added missing translations.
9 years ago
06332f20be
Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter
Stop print timer with M105/M109
9 years ago
ac4e461901
Merge pull request #3186 from AnHardt/Fix-KEEPALIVE_STATE
Fix KEEPALIVE_STATE
9 years ago
92a7d4515a
Missing coma comment correction for the default cofig file
9 years ago
1aa531a3db
Missing coma comment correction for all config files
9 years ago
68dda08fff
Added pt_pt-utf8 language pack; Fixed some minor compiler warnings; Harmonize file suffix for the current existing UTF8 language packs; Updated all configuration files to reflect the new language packs
9 years ago
f8c10d6b0e
Added missing translations.
9 years ago
468df96b0f
follow-up the commit b82d91e
follow-up the commit b82d91eca6
9 years ago
338b69c24b
Fix extrudernum in MSG_INVALID_EXTRUDER
SERIAL_ECHO is not very good in printing uint8_t - so cast. to int.
9 years ago
b39b54031b
Fix KEEPALIVE_STATE
Add return to NOT_BUSY for M105
Replace WAIT_FOR_USER with PAUSED_FOR_USER
Add Travis test for FILAMENTCHANGEENABLE
9 years ago
32f75749e4
Merge pull request #3117 from Blue-Marlin/thermal-protection
Improve the descriptions for THERMAL_PROTECTION
9 years ago
7aafee3003
Merge pull request #3185 from esenapaj/patch-1
follow-up the PR #3180 , #3183
9 years ago
37eaa1406b
follow-up the PR #3180
9 years ago
198d5d56fd
follow-up the PR #3183
9 years ago
4119cef32f
Merge pull request #3180 from clexpert/RCBugFix
Czech language specific changes
9 years ago
da94bcfebb
Merge pull request #3184 from thinkyhead/fix_command_injection
Patch drain_queued_commands_P
9 years ago
41145e6e81
Patch drain_queued_commands_P
Fix a SNAFU that should have been caught in #3012
9 years ago
3ce0c5063f
Merge pull request #3183 from thinkyhead/rc_lcm1602_support
Also closes #3181 .
9 years ago
eda95d8bed
Add support for LCM1602 16x2 I2C LCD adapter
9 years ago
59483221d5
Move stepper DAC to a separate file
9 years ago
5d0570cea0
Make digitalPotWrite depend on HAS_DIGIPOTSS
9 years ago
f96bc03081
Add M907-M910 g-codes support for Printrbot Rev. F
9 years ago
8d9cf72db0
Merge pull request #3177 from thinkyhead/rc_finish_M665
Include M665 "ABC" parameters in EEPROM
9 years ago
6843b78f99
Add support for Printrboard RevF
The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control.
The Pins file for the RevF board is included.
9 years ago
98392782ea
Update Configuration.h
9 years ago
daa52124b0
Update language_cz.h
9 years ago
3166aed087
Improve the descriptions for THERMAL_PROTECTION
9 years ago
a02ae36ae8
Include M65 "ABC" parameters in EEPROM
Addressing #2773
9 years ago
7f2375ab46
Merge pull request #3176 from thinkyhead/rc_patch_3149_part_ii
Use const parameters in lcd_implementation_drawedit (etc.)
9 years ago
cf7c444aff
Apply unknown_position_error elsewhere
9 years ago
eda5190581
Check for known position in `M48`
9 years ago
68085ca855
Updated M48 friendly for DELTA
Partial implementation with reference to MarlinFirmware/Marlin#3011
9 years ago
6a3529247f
"Homing" as a translatable string
9 years ago
c97c2dcaf7
Use const parameters instead of static casting
Alternative fix to #3149
9 years ago
jbrazio
esenapaj
PheiPheiPhei
Scott Lahteine
Scott Lahteine
Silvio Didonna
AnHardt
CoderSquirrel
Stephanie
Petr Zahradnik
Blue-Marlin