2512871a36
Patch configs UBL followup
8 years ago
27b5666e15
Move Allen Key probe definition to the top
8 years ago
cf94688925
Univeral Bed Leveling - configuration
8 years ago
77491dd924
Remove extraneous whitespace
8 years ago
0e410c9dfd
Software endstop options as simple switches
8 years ago
3e927ff204
Replace MBL Z hacking
8 years ago
f02af83d42
Remove some extraneous spaces
8 years ago
5a456c832a
Apply TMC2130 to example configurations
8 years ago
7698c5617a
Added circle nozzle cleaning parameters to example configurations
8 years ago
05abe853f9
New option: NO_WORKSPACE_OFFSETS
8 years ago
fb4aead2b1
Clean up and finish #5887
8 years ago
de6c40ed8f
Add option to fix E/D ratio
Work around for slicers producing buggy gcode.
8 years ago
48b7e0f8d8
Nozzle Wipe Vertical Zig-Zag
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
8 years ago
561904345f
Tweak config ordering for M600
8 years ago
931914e679
Apply M600 updates to all configs
8 years ago
47f9883b0f
Dynamic allocation for SDCARD_SORT_ALPHA
8 years ago
a561bd5e3a
New feature: SDCARD_SORT_ALPHA
8 years ago
0d147ead66
Allow enabling volumetric filament on config load
8 years ago
d38e335272
From "microseconds" to "milliseconds"
delay() is milliseconds
8 years ago
4061fca1ad
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
8 years ago
5ab7b91615
Comment on filament runout sensor config
8 years ago
84c685f8b5
First draft of Unified Stepper / E Advance ISR
8 years ago
18ba31e9b5
Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example
8 years ago
6854f44bf2
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
8 years ago
1b2fb2bdc7
ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*
8 years ago
069c6b38dd
Remove unnecessary tabs and spaces
8 years ago
06af3b62ba
Move HOLLOW_FRAME options to config_adv
8 years ago
d0e24e0876
Adaptive screen updates for all kinds of displays
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.
For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.
When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.
When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
8 years ago
641e0936d4
Patch up Delta Calibration Menu
8 years ago
da6a094424
Sanity-check inverting and pullups for Z probe and Z endstop
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
8 years ago
aa241c63b3
Include M205 note in configurations
8 years ago
d7b948610a
Experimental bilinear subdivision option
8 years ago
d5bf1684fe
Implement as optional feature LCD_DECIMAL_SMALL_XY
And reduce the function size to simplify
8 years ago
3391c785c6
Support for distinct E factors
8 years ago
f60b4f8659
Allow case light pin to be active low
8 years ago
0909cf3d46
Adjust spacing
8 years ago
65c50e062e
Support for an RGB LED using 3 pins
8 years ago
f674246397
extend Configurations files
8 years ago
f62f4006af
Account for LCD improvements in ENSURE_SMOOTH_MOVES
.. and give the hint to try lower values if possible.
8 years ago
5460a529da
Add option DOGM_SPI_DELAY_US
8 years ago
f6f77d34a1
Add a fade factor for mesh leveling
8 years ago
ef97645002
Follow-up the PR #5255 (Case light menu (3rd attempt))
8 years ago
4e4f37b6c2
Code formatting for TMC and L6470 config options
8 years ago
bf5f5f44cc
Make TMC2130 init code auto-configure
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
8 years ago
d67c1d825f
Add TMC2130 support
8 years ago
11effeee2c
Add an option for delta to home to the top
8 years ago
072541f286
Update ENSURE_SMOOTH_MOVES in all configs
8 years ago
eb714ee873
Move dummy thermistor opts, fix redundant sensor comment
8 years ago
7a99c6ce4f
Reformat temp sensor listing
8 years ago
eb120e518c
Followup to new endstop interrupts feature
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
8 years ago
Scott Lahteine
Marek Pikuła
Sebastianv650
Colin Gilgenbach
Robert Kirk
esenapaj
AnHardt
akaJes
jes
Moritz