Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Scott Lahteine	98600e1433	Minor stepper cleanup	8 years ago
Florian Heilmann	d08867986e	Add autotemp capabilities to M104 This allows M104 to pass the F and B parameters to enable autotemp as well	9 years ago
Sebastianv650	c11b2bb777	Bugfix LIN_ADV Advance has nothing todo with Z_AXIS, strange copy&paste error?	9 years ago
esenapaj	b278b7a395	Update Japanese translation Only adjust spacing	9 years ago
Petr Zahradník junior	d7ce5d271b	Replace const bool with #define for consistency	9 years ago
Scott Lahteine	99b0c1fe56	Fix DIRECT_MIXING_IN_G1 to preserve the previous mix	9 years ago
Markus Towara	23a675f621	reduce binary size of .hex still a few bytes bigger than with arduino but nothing major	9 years ago
Markus Towara	5b6e2cecf5	bump c/c++ standard to gnu11 needed for constexpr	9 years ago
Scott Lahteine	410657b050	Fix G30 with limits, print correct probe XY	9 years ago
Sebastianv650	e3ffb58fbd	Save some cycle inside the planner planner.h: fan speed is used to set integer variables, so no need for long. Basicaly a byte should be enough for all the fan things, as it's 0-255? planner.cpp: Save some float multiplications. We could squeeze out even more by defining feedrate_percentage, saved_feedrate_percentage and flow_percentage as float instead of int. Everytime they are used in the time-critical planner, they are casted to float and multiplied by 0.01. Not done jet, as they are used in LCD menu functions I don't know well enough.	9 years ago
Scott Lahteine	f663220e87	Store Mix factors as reciprocals and multiply	9 years ago
Michael Neumann	8bdf303da0	Update pins_MEGATRONICS_3.h	9 years ago
Michael Neumann	3890366c83	Update pins.h	9 years ago
Michael Neumann	c0d45ca7f2	Update boards.h	9 years ago
Sebastianv650	cdc18f8c22	Remove useless line from stepper ISR The flag is already set inside planner.get_current_block(). Doing it twice isn't making it better..	9 years ago
Kai	8e8b4398f3	Printer Stats / Completed prints line doesn't fit in display (when german)	9 years ago
Scott Lahteine	b31a07e261	Stateful M355 with separate P parameter	9 years ago
Scott Lahteine	3c9a838651	Extended capabilities report in M115	9 years ago
Scott Lahteine	68b866b5dd	Add M155 - Auto-report temperature with interval	9 years ago
Scott Lahteine	68b46fb2c9	Allow send to i2c address 0 (broadcast)	9 years ago
Scott Lahteine	75bfde9945	M155=>M260, M156=>M261	9 years ago
esenapaj	2ae72b0491	Follow up the PR #5167 (Add Turkish Language) again, etc ・Update forgotten K8400\Dual-head\Configuration.h ・Adjust spacing	9 years ago
Scott Lahteine	e765eebfb0	Patch spacing in bilinear grid report	9 years ago
Scott Lahteine	7780052fb3	Give instant feedback for filament change	9 years ago
esenapaj	24e3f7abe7	Update Turkish translation ・Add new translation	9 years ago
esenapaj	be48792e9c	Follow up the PR #5167 (Add Turkish Language), etc ・Remove all the #ifndef ・Follow the PR #4603 (Strip never-translated strings from language files) ・Follow the PR #4634 (Set language display charset in language.h) ・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code) ・Adjust spacing	9 years ago
Rigid3D	2327764980	Add Turkish Language	9 years ago
Nikolay Zinov	dea00bbcf1	improve G30 probing Add optional parameters X, Y for probe point S sets stowing on and off	9 years ago
Scott Lahteine	00662b8635	Minor babystep cleanup patches	9 years ago
Scott Lahteine	cad792e702	Reduce code for invariant lcd_detected	9 years ago
Scott Lahteine	b23d255491	Move macros above Stepper::babystep	9 years ago
Scott Lahteine	cc57d46158	Fix set_position for CoreYZ	9 years ago
Scott Lahteine	176aeafc19	Don't define bilinear_line_to_destination on kinematic setups	9 years ago
Sebastianv650	d448500643	Account for moves with negative E movements Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases). I also added a more detailed comment to make it more clear what the if statement does.	9 years ago
Scott Lahteine	236853df22	Corrections to bilinear_line_to_destination - Allow more than 9x9 probe points - Account for the probe starting position	9 years ago
Scott Lahteine	0115e495fe	Fix up Dual X switch blocks	9 years ago
Scott Lahteine	2495ab7af2	Make dual_x_carriage_mode an enumeration	9 years ago
Scott Lahteine	d6c36f5bb9	Fix Z raise with DXC_AUTO_PARK_MODE	9 years ago
Scott Lahteine	0c79553fc5	Cast int to AxisEnum for some accessors	9 years ago
Scott Lahteine	adbf1f7dca	Add M355 to the GCodes list.	9 years ago
Scott Lahteine	12167bc8f3	OLD_SLOWDOWN does nothing, so remove it	9 years ago
esenapaj	c8c1a28f6f	Follow-up the PR #5089 (Centralize click-handling in the LCD loop) bool feedback is no longer used	9 years ago
esenapaj	c3a105186d	Follow-up the PR #5133 (M355 Case light) ・Add CASE_LIGHT_PIN into pinsDebug.h	9 years ago
Scott Lahteine	ee5b8d6dc8	Split moves on grid boundaries with bilinear ABL on cartesian	9 years ago
Scott Lahteine	955d14acb0	Patch photo pin code style	9 years ago
Stanley	ab3f966f5f	Case light G-code M355 implemented G-Code M355 into Marlin	9 years ago
Scott Lahteine	f418e82b15	Remove redundant definition of EN_C	9 years ago
Sebastianv650	f9bea7968f	BugFix for incorrect E-speed calculation The extrusion speed was wrong due to a not high enough precision of esteps to XY steps, therefore now the target float values are used to calculate the ratio between XY movement and extrusion speed. The e_speed_multiplier8 was replaced by an absolute multiplier called abs_adv_steps_multiplier8, therefore one multiplication and bitshift can be saved inside the stepper ISR. Due to this, also extruder_advance_k is better suited inside the planner and not the stepper files any more.	9 years ago
Bob-the-Kuhn	c20b4098be	2 bug fixes & some minor changes see detailed description in PR #5118	9 years ago
Scott Lahteine	3a107e280d	Developer note in pins_MIGHTYBOARD_REVE.h	9 years ago

1 2 3 4 5 ...

5422 Commits (98600e1433f402a380d3d9315acd04087a784700)