6f86c46fa6
Fix typo that caused scope issues for DELTA ( #6750 )
8 years ago
1fbcbc05f6
UBL no longer flout's the sacred GCode standard ( #6745 )
Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy
8 years ago
267f77b18b
More constraint on axis_unhomed_error
8 years ago
645096b87a
Updated Basque translation
Updated Basque translation with new strings.
8 years ago
40d95a4e23
Update the gMax files to display better with Proportional Fonts ( #6727 )
Update the gMax files to display better with Proportional Fonts
8 years ago
c06af63f87
G26's default behaviour ought to be the entire mesh ( #6726 )
Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines.
It is more natural for the unsophisticated user to just do the entire mesh (bed). We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!
8 years ago
15040821e0
Setup FolgerTech-i3-2020 files better for the user ( #6724 )
UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER
Either configuration works on the machine. But we want it 'Right'.
Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.
8 years ago
67c9b1e332
Update M665 comment, fix M665 code_value code.
8 years ago
37399e3cb5
Fix prepare_move_to_destination_cartesian for UBL
8 years ago
a7fb55ea6d
Use GRID_MAX_POINTS. Some formatting
8 years ago
0e582bcfb7
Fix #6691 - redundant line in M665
8 years ago
68ae7c8d7a
Bugfix PRINTER_EVENT_LEDS
Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined
8 years ago
ba29da56e0
Add disclaimer for verboten parameters
8 years ago
0696dda470
Cleanups to UBL_DELTA
8 years ago
cbfca29522
M421 tweaks, just to use const
8 years ago
233f824dd6
Define GRID_MAX_POINTS
8 years ago
b17e2d3dcd
Apply const in Marlin_main.cpp
8 years ago
92fbea2906
Add some GCodes to the header of Marlin_main.cpp
8 years ago
94e90ca26c
Tweak M80/M81 descriptions
8 years ago
ee50dfaaf3
Adjust G26 arguments
8 years ago
b0ba5cae73
Fix a spelling boo
8 years ago
91841d75c9
UBL_DELTA ( #6695 )
UBL on Delta's.... Should be close! Should not affect any Cartesian printer.
8 years ago
5a5dba6fc8
UBL: Minor improvement to G29 P2
- allow H code value to override probing height
- minor cleanups
8 years ago
ae676490c9
M421: Add 'adjust closest point' capability
- Split M421 into separate versions for bilinear and ubl
- Fix minor issue in G26
8 years ago
b63e82f309
M421 Mesh Point Offset and misc. UBL clean up ( #6685 )
* M421 Mesh Point Offset and misc. UBL clean up
Allow M421 to accept an offset as well as absolute value for a specified
mesh point.
And misc. UBL clean up to reduce redundent code.
* Better error checking for M421
* Fix M421 Y index bug
I just noticed.... We've had a Y index bug for who knows how long?
8 years ago
539e0c2f31
"M80 S" to report the state of the PSU pin
8 years ago
2604742191
Add proportional font adjustment ratio
- update example configs
8 years ago
f7a201b0d0
G26: Add 'Repeat' Option
- Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx
- Moved the code for Random to 'M' so we could be consistent with G29 P4
- G26 instructions indenting/cleanup
8 years ago
9c5957fc77
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
8 years ago
4da14b14f4
UBL Cleanup/Bugfix
- Fix bug in ubl_line_to_destination
- Improve/fix output of some ubl.h functions
8 years ago
66db6c3acc
UBL Menu System 1.1
/**
* UBL System submenu
*
* Prepare
* - Unified Bed Leveling
* - Activate UBL
* - Deactivate UBL
* - Mesh Storage
* Memory Slot:
* Load Bed Mesh
* Save Bed Mesh
* - Output Map
* Map Type:
* Output Bed Mesh Host / Output Bed Mesh CSV
* - UBL Tools
* - Build Mesh
* Build PLA Mesh
* Build ABS Mesh
* - Build Custom Mesh
* Hotend Temp:
* Bed Temp:
* Build Custom Mesh
* Info Screen
* - Build Cold Mesh
* - Fill-in Mesh
* Fill-in Mesh
* Smart Fill-in
* Manual Fill-in
* Info Screen
* Continue Bed Mesh
* Invalidate All
* Invalidate Closest
* - Validate Mesh
* PLA Mesh Validation
* ABS Mesh Validation
* - Custom Mesh Validation
* Hotend Temp:
* Bed Temp:
* Validate Mesh
* Info Screen
* - Edit Mesh
* Fine Tune All
* Fine Tune Closest
* - Adjust Mesh Height
* Height Amount:
* Adjust Mesh Height
* Info Screen
* - Mesh Leveling
* 3-Point Mesh Leveling
* - Grid Mesh Leveling
* Side points:
* Level Mesh
* Info Screen
* - Output UBL Info
*/
8 years ago
3b0127cf8e
Fix compiler complaint related to M100
8 years ago
11104f177b
Apply const in BABYSTEPPING
8 years ago
081bf1f879
Patch #else / #endif comments
8 years ago
a9487c9443
Reduce redundancy in BLTOUCH conditionals
8 years ago
8d961b51cc
Eliminate M100 compiler warnings?
8 years ago
fe96376a73
Fix FWRetract with positive z-moves during retracted state
8 years ago
47cae2929f
Patch platformio.ini to fix build error in DevIoT
For compatibility with DevIoT, until that can be solved.
8 years ago
911a87e006
Disable SCARA feedrate scaling by default
8 years ago
71396f77d3
Cleanups following recent commits
8 years ago
dca48f0e63
Move platformio.ini back to Marlin folder - it works there
8 years ago
a6dafb058e
Small reduction in error code size
8 years ago
a1e04942a2
Cleanup to software PWM variables
8 years ago
a20d0794e6
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
8 years ago
3279337f47
Move BLTouch LCD menu from Main to Main/Control
8 years ago
6cb0fa4128
Cleanup previous implementation of new quiet probing
Saves a few lines of code.
8 years ago
56ca47ab9d
Patch configuration temp units
8 years ago
421dd62800
Adjust spacing of "spaces"
8 years ago
26dba44cd3
Patch redundant lcd settings
8 years ago
34b5041576
Spacing adjustment, ubl_G29
8 years ago
Roxy-3D
Scott Lahteine
Aaron Busca
Markus Towara
oldmcg
Brian
Pablo Ventura
Tannoo
Florian Heilmann
Scott Lahteine
Thomas Moore