Christian Thalhammer
5f3a422e68
added M31 - delete file from sd card
13 years ago
Christian Thalhammer
fa2e3a40e9
fixed LCD manual z axis move Feedrate to 70 (was 1700)
13 years ago
Christian Thalhammer
a92b3afe64
added german translation;Menue should be in english.. sounds better
13 years ago
Christian Thalhammer
9fa586bbed
fixed languages; Preheat_PLA and Preheat_ABS was not defined for non
english
13 years ago
Christian Thalhammer
10bf2bb8e1
-
13 years ago
Erik van der Zalm
b4833d55c2
Fixed HOME_POS in combination with G28 X0 or G28 Y0
13 years ago
Erik van der Zalm
c6f2ec3c82
remove stop_heating_wait
13 years ago
Erik van der Zalm
b48d67ce10
Fixed homing
13 years ago
Phil Hord
b65ef8d66c
Add support for upcoming Gen7 v1.4
V1.4 moves thermistor power to the always-on 5v line.
The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer
needed on this board. Add a new motherboard type to
support this feature.
13 years ago
Phil Hord
740f0c7690
Add explicit #define for bogus temp override
The code to ignore the "bad thermistor reading failsafe"
suicide function depends on the existing of the PS_ON pin
feature. But in some boards this shouldn't be the case
Fix this by adding an explicit definition to make our
intentions more clear and separable.
13 years ago
Phil Hord
ba8500a236
pins.h: Define Z_MAX_PIN for Gen7 board
The Z_MAX_PIN value was defined as no-value, but this causes
the compile to fail. Fix this by setting the Z_MAX_PIN to the
correct value (which happens to be 0 for pin PB0/DIO0/0).
13 years ago
Phil Hord
09469add55
Add board reset reporting (from Repetier-Firmware)
13 years ago
Phil Hord
f3101e96d9
Add suitable .gitignore to avoid build noise
13 years ago
Phil Hord
245dca4bee
Makefile: generic pde=>cpp rule
This adds flexibility to the makefile by allowing different pde
targets to be specified for different needs.
13 years ago
Erik van der Zalm
97d42ca2b2
SDSUPPORT default disabled
13 years ago
Changwoo Ryu
7b14953c99
Fix build on Sanguino based boards with ATmega1284P
13 years ago
Daid
286d5003fa
Fixed compiler warning for Sanguino compile
13 years ago
Erik van der Zalm
27f595a444
Changed version => RC2
13 years ago
Erik van der Zalm
018c567abf
Moved SLOWDOWN function. (jetty840)
Included AD595 calibration options. (daid)
13 years ago
Erik van der Zalm
ce714fe306
Fixes in pins.h
13 years ago
Erik van der Zalm
35e57bf149
Added gen6 deluxe.
13 years ago
Erik van der Zalm
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
Split ramps1.3 in Sprinter like config and multiextruder config.
13 years ago
Guillaume Seguin
adc108d79e
Correctly build the produced applet/Marlin.cpp source
13 years ago
Erik van der Zalm
5aa9c41ab1
Changed comment mode for detection.
Added M221 extuder multiply factor.
13 years ago
Erik van der Zalm
00690f7ffd
Fix cast warning in Gen7
13 years ago
Erik van der Zalm
01d28c18ab
Fixed casting warning in sanguino
13 years ago
Blair Thompson
2fd8c248fe
Added Fan control to the pre-heat settings.
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine. Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.
This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
13 years ago
Blair Thompson
d9f2f509d5
Added new menu items under the prepare submenu.
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
13 years ago
Erik van der Zalm
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
Updated the Xsteps ... settings via the LCD menu
13 years ago
Erik van der Zalm
df1437bd86
Changed display format for some numbers.
13 years ago
Erik van der Zalm
8816ef1c64
Small fixes after merge
13 years ago
Erik van der Zalm
a0a1f81913
various changes
13 years ago
Christian Thalhammer
8a8ea50f33
fixed manual axis movement lcd option
13 years ago
Blair Thompson
b976692d0f
Removed VS project files for tidyness stakes
13 years ago
Blair Thompson
fe940a142d
Added a structure that will allow easy translations/modifications to the LCD menu.
Signed-off-by: Blair Thompson <mail@justblair.co.uk>
13 years ago
Christian Thalhammer
b3fb09a20c
change preheat to ABS values of nozzle 227 and be 105 °C
next try for manual axis movement
13 years ago
Blair Thompson
a05a261b72
Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
13 years ago
Blair Thompson
1b6765ed12
Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface
13 years ago
Christian Thalhammer
1ff99ae25f
ATMega1284P support for Arduino IDE
replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
13 years ago
Christian Thalhammer
e661578c84
support for GEN7 1.1,1.2 and 1.3
13 years ago
Daid
73344e69c1
Added temperature offset/gain settings for AD595.
13 years ago
Christian Thalhammer
0e3631ff4b
smaller changes
13 years ago
Erik van der Zalm
fa2e1be0ca
changed default EXTRUDE_MINTEMP to 170.
13 years ago
Erik van der Zalm
7699f250e3
Fixed small merge bug
13 years ago
Erik van der Zalm
b447815de5
removed unused HEATING_EARLY_FINISH_DEG_OFFSET
Simplified stepper inactive time
13 years ago
Erik van der Zalm
bde30b2b48
Corrected e-length calculation in planner
13 years ago
Erik van der Zalm
13e185d330
removed unused HEATING_EARLY_FINISH_DEG_OFFSET
Simplified stepper inactive time
13 years ago
Erik van der Zalm
b58eae7657
Corrected e-length calculation in planner
13 years ago
daid
2a77c84c8f
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
13 years ago
Erik van der Zalm
d47a3e5950
Changed check i mtion_conrol
if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001)
(thanks mooselake)
13 years ago