Erik van der Zalm
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
13 years ago
Erik van der Zalm
8aee9d51b6
Disabled disable_heater in PID_autotune.
13 years ago
Daid
414408b2d0
Fix for wrong systax in #ifdef.
13 years ago
Michael Moon
77d503fa13
Fix Makefile
13 years ago
Erik van der Zalm
cf7c8c458f
Fixed MAX6675
13 years ago
grrf
03b0850e63
This breaks temperature readout for pronterface!
13 years ago
tgiphil
ad8bc71d3e
- Fixed a typo
13 years ago
Erik van der Zalm
46feae79c6
Fixed typo in arc
13 years ago
Erik van der Zalm
4ca2f336f0
Changed default MINIMUM_PLANNER_SPEED -> 0.05
Fixed small bug in arcs
M105 prints now actual_temp/target_temp
13 years ago
Erik van der Zalm
ae0bf8068b
Fixed arc offset.
13 years ago
Erik van der Zalm
0c1b863755
Ignore ":" in comments.
13 years ago
Erik van der Zalm
63aec3c56e
Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.
Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp
13 years ago
Tommy Cheng
520f1a54a8
Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined.
13 years ago
Michel Pollet
5550e893d5
New board variant, Open Motion Controller
Open Hardware board currently used by the group build of http://tvrrug.org.uk
The board can be found at http://solderpad.com/folknology/open-motion-controller/
Signed-off-by: Michel Pollet <buserror@gmail.com>
13 years ago
Michel Pollet
aa6e6e914e
Makefile: Redone
+ Removed most explicit pathnames, use the standard make "VPATH" to let
make find the files for itself.
+ Added a "hardware variant" variable that allows compiging Sanguino and
Gen7 as well as "generic" arduino.
+ Allows overriding the MOTHERBOARD define from the Makefile
+ Removed the 'preprocessor' bit that wasn't needed, now just "include" the
files that are needed, since it allows gcc to show the right file/line
when displaying error/warnings.
+ Uses gcc's own dependency generator to generate the .d files, and
and include these instead of self-patching the makefile
Signed-off-by: Michel Pollet <buserror@gmail.com>
13 years ago
Bernhard
0183e6332a
made prepare->autostart independent of current folder.
13 years ago
Bernhard
1532200435
found error in filenames.
One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely
13 years ago
Erik van der Zalm
b985e4a134
Fixed compile errors in ultralcd when no ultra_lcd is selected.
13 years ago
Erik van der Zalm
2e749d60c3
Added DISABLE_MAX_ENDSTOPS
13 years ago
Erik van der Zalm
33f5697888
PPID tune exports more constants.
13 years ago
Erik van der Zalm
f5eae52098
Added more manage_inactivity checks
13 years ago
Erik van der Zalm
910f4e77a2
Added 20MHz support.
13 years ago
Erik van der Zalm
87ff2f8867
Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)
13 years ago
Erik van der Zalm
387fe51a56
Do not disable steppers when there are moves in the queue.
13 years ago
Erik van der Zalm
421264e58a
Fixed typo
13 years ago
Erik van der Zalm
15ad923310
Removed !!!. Stupid arduino bootloader can't handle this.
13 years ago
Erik van der Zalm
61e09e6be2
Added FAN_PIN -1 checks
13 years ago
Erik van der Zalm
87c4e06c24
Corrected active_extruder when autotemp is used.
13 years ago
Erik van der Zalm
c077316b2b
Added PID autotune. (experimental)
M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed.
Put these values in Configuration.h
13 years ago
Ben Gamari
49b228c4b3
Add instructions to regenerate speed_lookuptable when changing F_CPU
13 years ago
Ben Gamari
96509494f0
stepper: Clarify comment on timer-counter configuration
13 years ago
Ben Gamari
6d7e6a11fc
Add create_speed_lookup
13 years ago
Tommy Cheng
ce07c9186d
While Waiting for hotbed to warm up via M190, LCD Display and Click Encoder input freeze until target temperature is reached.
13 years ago
Erik van der Zalm
116dc86b8a
Fixed type in e-jerk
13 years ago
Blair Thompson
02ee9e3d30
Changed Pin Assignment for the RAMPS motherboard so that LCD and Rotary encoder are all wired to AUX-4
This simplifies wiring for those with RAMPS 1.3 and 1.4 boards.
13 years ago
Erik van der Zalm
e056bf8081
Added E-Jerk
13 years ago
Erik van der Zalm
4deeffbc88
Added missing defines to the german section.
Translation still needed.
13 years ago
Erik van der Zalm
aac7aa3bf0
Queued fan control. Issue #90
13 years ago
Christian Thalhammer
fde51084f3
set SD file delete to M30; switch printime output to M31
13 years ago
Erik van der Zalm
21e2bae063
Changed (corrected?) SD_card comment handling.
13 years ago
Erik van der Zalm
072011a3ef
Added current_block = NULL to quickStop()
13 years ago
Erik van der Zalm
f598077af3
Removed vc files
13 years ago
Erik van der Zalm
ed951b1977
Fixed RAMPS 1.2 support (Found and fixed by rrhb)
13 years ago
Blair Thompson
4879de08e8
The percent complete for the SD file statistic sits squint. Changed "lcd.Setcursor (7,2);" to "lcd.Setcursor (10,2);".
The percent complete now lines up with the temperatures and Z-axis position figures, nicer to read and nicer to look at IMHO.
13 years ago
Blair Thompson
f278e1c00f
This is in my opinion a much better way of dealing with SD cards than my previous fix.
Instead of adding a momentary switch to fake the insertion of the card I have modified the ultralcd menu item:
Card Menu -> Refresh
to reinitialise the card providing that the SDCARDDETECT pin has been set to -1 in the pins.h file. This requires one less switch on the front panel and the refresh menu item is in the most relevent place for a user who wishes to inert a card and then print from it.
It also means that the "Card inserted" messages do not bother the users of these card readers (they dont make sense for users without SCCARDDETECT)
13 years ago
Blair Thompson
046a8e0039
Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.
13 years ago
haxar
79a466ca26
make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, complementing changes to analog2temp in d15f01e
13 years ago
Christian Thalhammer
5f3a422e68
added M31 - delete file from sd card
13 years ago
Christian Thalhammer
fa2e3a40e9
fixed LCD manual z axis move Feedrate to 70 (was 1700)
13 years ago
Christian Thalhammer
a92b3afe64
added german translation;Menue should be in english.. sounds better
13 years ago