Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Maik Stohn	bd33cf4a9f	fixed typo / added "const" to defines for newer gcc compatibility	12 years ago
Maik Stohn	8d80cbbf4c	fix broken LCD commit #dfa549f268 from buildrob - GLCD/DOGM implementation was ignored	12 years ago
xifle	98d0d48191	fixed merge	12 years ago
xifle	bbe67fca5a	soft tab correction	12 years ago
Bas Spaans	424101110c	Add Panelolu2 support for Melzi	12 years ago
Erik van der Zalm	86cce025f4	Added #ifdef NUM_SERVOS to servo.cpp	12 years ago
xifle	03141a5ef4	LCD: Added Deadzone at 100% Feedrate This adds a deadzone at 100% Feedrate when changing it at the status screen/main menu. Prevents from unwanted feedrate-changing when navigating back to the main menu and makes it easier to return to 100%.	12 years ago
Robert F-C	4121311b9d	Change to LCD status indicators The I2C LCD status indicators now indicate when the hotends or bed are turned on at all (rather than just when they are in their heating phase)	12 years ago
Erik van der Zalm	6c45c3f4e7	BariCUDA changes	12 years ago
Gord Christmas	96624f0f31	Forgot to include reference to Servo in makefile	12 years ago
Gord Christmas	dc59f07d24	First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.	12 years ago
Gord Christmas	b668cb0516	Adding in clean copies of Servo library from Arduino 1.0.4	12 years ago
MaikStohn	95dff34b73	fixed wrong compare for min temp check of heater 1 and heater 2	12 years ago
MaikStohn	4cc6f9f6de	fixed wrong pin initialization when using temperature 2 pin input	12 years ago
MaikStohn	61a48cc662	Add support for RUMBA thermocouple add on	12 years ago
MaikStohn	9cc15876be	Add support for RUMBA thermocouple add on	12 years ago
Erik van der Zalm	bd2cd4903e	Added #ifdef BARICUDA around the BariCUDA changes	12 years ago
Jordan Miller	37f3199df3	fixed problems in planner with solenoids for BariCUDA when set to 0	12 years ago
Jordan Miller	fbd899a37d	Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129.	12 years ago
xifle	29bb8d7d4f	Fixed "Cooldown" Selection not reseting bed temp - enquecommand with multiple lines "\n" doesn't work -> M140 S0 didn't get processed. So I wrote a new func for the cooldown which uses setTargetHotend. In addition this does return to status page after selection. - Added setWatch() to preheat-functions (Temperatur sanity check would never have worked when preheating from the lcd panel)	12 years ago
Robert F-C	015d0594b0	Optimize menu selection for Viki rotary encoder. The Viki LCD rotary encoder uses a different number of steps per rotation. This fixes the seeming "missed" steps when selecting a menu.	12 years ago
gregor	2739c26c4f	changes: - changed the variables from keypad to reprapworld_keypad - added a missing ifdef check	12 years ago
gregor	6fb9573157	added support for the reprapworld keypad	12 years ago
midopple	a65a26d6b4	If CORE_XY is in use X and Y Axis had to be activated at the same time	12 years ago
midopple	db2f157a22	Replace the <= to < in the Command M907, M350 and M351. The for loop for Axis count over the Array. Add a break after M907	12 years ago
Arnoud	fc4ab05157	Solved minor bug in controllerFan() Extruder 2 was checked where extruder 1 should be checked.	12 years ago
Martin Renold	1a397825f9	fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error	12 years ago
Robert F-C	289c02eda4	Remove unnecessary pin initialization in stepper.cpp (duplicates initialization in Marlin_main.cpp)	12 years ago
Robert F-C	d5ad7a0814	Rework change to incorporate CONTROLLERFAN Also refactor extruder auto fan logic to simplify further and now only check every 2.5 seconds	12 years ago
Robert F-C	1c127217df	Make DOGLCD merge neater.	12 years ago
Robert F-C	7f57f28ccc	Add lcd_buzz function to ultralcd.h so that non-LCD code can make use of lcd's buzzer. Argument order of lcd_buzz was set to mirror that on tone(). Change default M300 frequency to something audible.	12 years ago
Lukasz Stefanowicz	d71f1e9bf6	Add (as an option) slower SD transfer mode	12 years ago
Bracken Dawson	d5ee2a5a62	Make Gen7 1.4 heater pins match silkscreen	12 years ago
MaikStohn	7ac6d7f78e	FIX: Speedup - no explicit display clear needed in u8glib	12 years ago
MaikStohn	13596e8722	Added RepRapDiscount FULL GRAPHIC Smart Controller	12 years ago
MaikStohn	3a6abe1d6e	Removed STB custom font hack from u8glib library and moved to marlin project	12 years ago
MaikStohn	16afbf9bfa	FIX: adopted latest changes from hitachi implementation	12 years ago
daid303	ac52dcc174	Updated the card menu and watch messages to make it more informative.	12 years ago
Stefanowicz	31bb3fb297	Fix: Build error when EEPROM_SETTINGS is defined and PIDTEMP is undefined	12 years ago
daid303	c80a78bb70	Lower the default max E feedrate a bit. With the stepper fix this is much to high.	12 years ago
Simon Oliver	5d5909fc25	Fix failure to compile with heated bed: remove call to non-existant scaleBedPID().	12 years ago
Simon Oliver	93f0463b21	Allow Edit menu to call fn after edit; Fix PID Ki and Kd display in menus; Actually use changed PID and Max Accel values Add new 'callback' edit-menu types that call a function after the edit is done. Use this to display and edit Ki and Kd correctly (removing the scaling first and reapplying it after). Also use it to reset maximum stepwise acceleration rates, after updating mm/s^2 rates via menus. (Previously, changes did nothing to affect planner unless saved back to EEPROM, and the machine reset). Add calls to updatePID() so that PID loop uses updated values whether set by gcode (it already did this), or by restoring defaults, or loading from EEPROM (it didn't do those last two). Similarly, update the maximum step/s^2 accel rates when the mm/s^2 values are changed - whether by menu edits, restore defaults, or EEPROM read. Refactor the acceleration rate update logic, and the PID scaling logic, into new functions that can be called from wherever, including the callbacks. Add menu items to allow the z jerk and e jerk to be viewed/edited in the Control->Motion menu, as per xy jerk. Conflicts: Marlin/language.h	12 years ago
Bart K	4fa2260a59	Fixed cardreader.h to resolve issue #440 (Pull Request #425 missing file)	12 years ago
Erik van der Zalm	038d405254	Corrected #endif in language.h	12 years ago
Dirk Eichel	443aaa30bf	Removed GIT fragments Seems that there was something wrong while merging	12 years ago
ErikZalm	7a5c474d91	Update Configuration.h	12 years ago
Colin Edwards	0d075378d5	Add LARGE_FLASH define and enable it for some of the beefier boards The LARGE_FLASH flag allows superfluous features to be excluded on boards with less memory	12 years ago
Colin Edwards	9a1c90471f	Ignore unused beeper pins	12 years ago
Colin Edwards	1a0f889803	Add support for M300: Play beep sound	12 years ago
Robert F-C	9322c408c6	Updated for LiquidTWI2 library version 1.2.3 The new version of the library means that PANELOLU no longer needs to be defined in LiquidTWI.h (the library file can be used as is) and the new version of the library also enables the buzzer on the Panucatt VIKI panel.	12 years ago

1 2 3 4 5 ...

810 Commits (440cf2bc1097aee4045337f83d98b97eee1846b2)