3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
7 years ago
ca9734805c
Merge pull request #7560 from thinkyhead/bf1_m406_patch
Addressing #7552
7 years ago
0067bb2840
Addressing #7552
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
7 years ago
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
New feature: Part-Cooling Fan Multiplexer
7 years ago
ddfe527ff2
Merge pull request #7554 from thinkyhead/bf1_sanguino_config
Sanguinololu example config
7 years ago
86c024ce98
Organize, document pins.h include lines
7 years ago
c7b07d20f2
Minor patches to pins files
7 years ago
356af7dcb0
Tweak Sanguinololu-related pins files
7 years ago
11a724d8fc
Sanguinololu example configuration
7 years ago
d29bf49b66
Add Sanguino 644p to ENV for PlatformIO
7 years ago
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
7 years ago
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
7 years ago
e82e9073d6
Merge pull request #7530 from GMagician/Code-reduction
Code reduction with some configurations
7 years ago
69d1052010
Merge pull request #7529 from GMagician/My-bugfix-1.1.x
#7528 fix
7 years ago
6127154af3
Fix identation by tab
There was a tab instead of spaces
7 years ago
b94a1c6b9f
Code reduction this some configurations
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
7 years ago
405a2132f3
#7529 compile fix
I made an error in previous fix
7 years ago
869d7f3703
#7504 missing part
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
7 years ago
101ba70517
Merge pull request #7505 from thinkyhead/bf1_anet_1_pio
Add Anet 1.0 to Platformio.ini
7 years ago
5e14bb61de
Merge pull request #7506 from thinkyhead/bf1_dual_parking_extruder
AutoParking Extruder (APE)
7 years ago
4817b39d98
Added new feature for AutoParking Extruder (APE)
7 years ago
6772e33ef6
Use [XY]_CENTER for error correction
Followup to #7512
7 years ago
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
Individual servo delays
7 years ago
2a31c9f2ce
Merge pull request #7515 from cdedwards/bugfix-1.1.x
Fix for G26 spam output
7 years ago
5fa61c0ad3
Add Anet 1.0 to Platformio.ini
Added env:anet10 to platformio.ini for easy compile and upload to this board
7 years ago
b3f59ec945
Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16
Add "Level Corners" menu item
7 years ago
b33739d493
UBL_Language_Update ( #7520 )
* UBL_Language_Update
Translatable strings
* Use slightly better wording...
* Use slightly better wording...
7 years ago
a1878cd1c0
Add "Level Corners" menu option
7 years ago
0a18fb735e
Use "PSU" label to fit on screen
7 years ago
30887feae3
Tweak some formatting in ABL G29
8 years ago
257b693ab0
Advanced pause fixes ( #7518 )
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
7 years ago
ab2ac1af71
UBL_LCD_storage_corrections ( #7517 )
Correcting the storage selection.
Also EEPROM error handling on the LCD.
7 years ago
f1843211e6
Fix for G26 spam output
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
7 years ago
be5ca34215
Allow G29 to work correctly even if nozzle is off the mesh. ( #7512 )
* work around previous regressions...
7 years ago
06541ec885
Merge pull request #7448 from thinkyhead/bf1_delta_fixes
Prevent damage if DELTA_HEIGHT is set badly
7 years ago
e9c72978c7
Implement SERVO_DELAY as array
This modify give SERVO_DELAY x servo basis
7 years ago
96ae53cf41
Use MOVE_SERVO macro where possible
7 years ago
6172f150c2
Merge pull request #7471 from thinkyhead/bf1_cleanups_aug9
Miscellaneous style tweaks
7 years ago
3be9c19f12
Hold on move axis screens
7 years ago
8fd58cd6dc
Patch goto labels for consistency
7 years ago
75e6f72c89
Fix hexadecimal number formatting
7 years ago
ac76101ec3
Eliminate goto in gcode_M48
7 years ago
75e6ead5fd
Eliminate goto in gcode_G33
7 years ago
6bd63d27b5
Updates to G29 for probe error handling
7 years ago
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
8 years ago
0938c62b48
Neater position_is_reachable call
7 years ago
9d95b1b4df
Tweak Conditionals_post.h
7 years ago
35d5a7bdff
Tweak CR-10 config/pins
7 years ago
419c8969a7
Merge pull request #7479 from thinkyhead/bf1_fix_italian
Fix Italian string length
7 years ago
25a11cd485
Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 ( #7480 )
7 years ago
Roxy-3D
Scott Lahteine
GMagician
Scott Lahteine
Vben
MTrab
Tannoo
Thomas Moore
cdedwards
Thomas Moore
Frederik Kemner