3b3029c4bf
Make max_e_jerk an array to reduce CPU usage ( #11118 )
6 years ago
d13f76b7da
Patch some loop macros
6 years ago
229b26b02c
Clear LED matrix without startup test
6 years ago
0ee34eb784
Add PIO board definitions for Malyan M200 ( #11120 )
Co-Authored-By: J.C. Nelson <xc0000005@users.noreply.github.com>
6 years ago
ffdbc1f42c
STM32F1: Fix SD card persistent store API ( #11090 )
6 years ago
8d8f257384
[2.0.x] Fix advanced pause init values ( #11095 )
Fixed for cycle used to initialize default values
6 years ago
5b49fccf80
Add stepper driver DIR delay configuration option
...and recommended pulse width configuration for A4988
6 years ago
d86f25ab63
Fix Serial ISR priority for LPC1768
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
6 years ago
fb4e0b105b
Fix endstops compilation error
6 years ago
48a15d1c7e
[2.0.x] Fix stepper/planner race condition and Stepper pulse timer ( #11081 )
* Planner: Removal of some race conditions between Stepper ISR and Planner, some of them pointed out by @AnHardt , some of my own findings
* Fixing timing on stepper pulses adding a compensation for the non-null time required to set ports.
6 years ago
3fa9aeb5c7
Restore env:teensy20, for now
See https://github.com/MarlinFirmware/Marlin/pull/11079#issuecomment-399309709
6 years ago
7e802145cc
[2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) ( #11068 )
6 years ago
3b7c5a31a3
Enable local board repository for PIO ( #11079 )
-Enable boards_dir option in PIO INI
-Remove defunct custom board file operations for PIO auto-build environment
-Remove now-defunct Teensy++ 2.0 PIO entry, replaced by `at90USB1286_DFU` and `at90USB1286_DFU` (using this entry always put AT90USB board boot loaders in jeopardy of being overwritten due to the very small size of the official Teensy++ 2.0 bootloader)
-whitespace
6 years ago
50b6204079
Fix LIN_ADVANCE max_e_jerk_factor
According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568
6 years ago
99591dc20c
Filter endstops state at all times ( #11066 )
6 years ago
a5c11bf578
Merge pull request #11075 from thinkyhead/bf2_value_editing
[2.0.x] Fix value editing (with callback)
6 years ago
1d7dd0edfd
Add the move_z_after_probing() functionality to UBL's G29 J
6 years ago
383129728a
Edit Z fade as whole numbers
6 years ago
1239e8eda2
Fix value editing with callback
6 years ago
7a84b03796
Use MIN/MAX in post-conditionals
6 years ago
a2a30ff0ac
Use Tool 0 for Dual X Axis G29
See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325
6 years ago
e366d55bc2
Don't reset stepper timeout for all g-codes
6 years ago
7406f04029
Use MAX (not max) in stepper.h
6 years ago
7c54c4ed27
Tiny improvement to M7219
The registers within the Max7219 can get corrupted a number of ways. This allows the Max7219 to be reset and fully initialized.
And... it also allows the user to see the initialization pattern.
6 years ago
a65d15c905
[2.0.x] Fix Italian msg len ( #11058 )
Fix message to long for 12864 display
6 years ago
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 ( #11034 )
6 years ago
e23677a7b2
Update some G-code comments
6 years ago
0312c42f9d
[2.0.x] LPC176x Serial cleanup ( #11032 )
6 years ago
c1269c2ec1
Tweak AVR critical section defines
6 years ago
da94e0bd27
Unsigned eeprom mesh addresses
6 years ago
f88adcbfd5
[2.0.x][LPC176x] Fix binary linking broken by pio update ( #11026 )
6 years ago
fdd97e649d
Merge pull request #11020 from simon-jouet/esp32
HAL for Espressif ESP32 WiFi
6 years ago
e2aeda61ed
HAL for Espressif ESP32 Wifi
7 years ago
091f742432
Add WIFISUPPORT to example configs
6 years ago
19d4c7c1cd
Tweak HAL header comments
6 years ago
7e8d2d611d
Auto Build for Visual Studio Code ( #11014 )
6 years ago
cce0523a95
[2.0.x] reset bltouch on home ( #11018 )
Added reset bltouch instead. This ensure properly stow even when in error.
6 years ago
4c8d6df13c
Extra insurance against endstop false positives ( #11013 )
6 years ago
81edbfa665
Merge pull request #11004 from ejtagle/always_honor_maximum_step_rate
[2.0.x] Fix stepper pulse minimum period and timing calculations
6 years ago
f3fed52348
Fix coolstep_min_speed / sensorless homing
Fix #8890
6 years ago
a215725df6
Fix stepper pulse timing
Always honor minimum period on stepper pulse generation, and fix timing calculations
Signed-off-by: etagle <ejtagle@hotmail.com>
6 years ago
0d79128c8d
Localize stepper-specific defines
6 years ago
a9861a780e
Tweak HAL heading
6 years ago
cf53e502a2
No need to set input after attachInterrupt
6 years ago
e0276d2f32
Official STMicroelectronics Arduino Core STM32F4 HAL compatibility ( #11006 )
6 years ago
4dbec774b5
HAL_*_TIMER_RATE => *_TIMER_RATE
6 years ago
928e50e724
Try LiquidCrystal@1.3.4
6 years ago
12689f2470
Merge pull request #11001 from thinkyhead/bf2_junction_deviation_fix
[2.0.x] Updates for junction_deviation_mm
6 years ago
9b945c13a1
Fix STM32F1 ISR_ENABLED
6 years ago
9d04f47d98
Improvements for junction_deviation_mm
- Drop `max_jerk` with `JUNCTION_DEVIATION`
- Add `max_e_jerk_factor` for use by `LIN_ADVANCE`
- Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes
- Fix LCD editing of `junction_deviation_mm`
6 years ago
Andy Shaw
Scott Lahteine
Dave Johnson
Alexander Amelkin
Giuliano
etagle
Michael Triffon
Scott Lahteine
Roxy-3D
Chris Pepper
Simon Jouet
Bob Kuhn
Karl Andersson