Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Daid	8e68c6cf89	Show proper temperature for extruder 2	13 years ago
Daid	8503b78876	Added support for 2nd extruder temperature to UltraLCD	13 years ago
Logan Bowers	3eacb4c16d	Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater	13 years ago
Bernhard	e4d2138dbd	reinitialize the lcd, if the SD card is inserted or removed. It seems that LCDs can confused by electrical discharges from time to time. Since a removal or insert of the sd card takes a long time in firmware, just reinitializing the lcd does not hurt. actually, it solves a problem with the UltiControlle	13 years ago
Bernhard	464b755918	added support for the UltiController	13 years ago
Bernhard	44fd8d46d2	fixed quickhome	13 years ago
Bernhard	33bb044d7c	fixed catsting to (int)e in serial error messages. see https://github.com/ErikZalm/Marlin/issues/148	13 years ago
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	13 years ago
Erik van der Zalm	8aee9d51b6	Disabled disable_heater in PID_autotune.	13 years ago
Daid	414408b2d0	Fix for wrong systax in #ifdef.	13 years ago
Michael Moon	77d503fa13	Fix Makefile	13 years ago
Erik van der Zalm	cf7c8c458f	Fixed MAX6675	13 years ago
grrf	03b0850e63	This breaks temperature readout for pronterface!	13 years ago
tgiphil	ad8bc71d3e	- Fixed a typo	13 years ago
Erik van der Zalm	46feae79c6	Fixed typo in arc	13 years ago
Erik van der Zalm	4ca2f336f0	Changed default MINIMUM_PLANNER_SPEED -> 0.05 Fixed small bug in arcs M105 prints now actual_temp/target_temp	13 years ago
Erik van der Zalm	ae0bf8068b	Fixed arc offset.	13 years ago
Erik van der Zalm	0c1b863755	Ignore ":" in comments.	13 years ago
Erik van der Zalm	63aec3c56e	Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart. Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp	13 years ago
Tommy Cheng	520f1a54a8	Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined.	13 years ago
Michel Pollet	5550e893d5	New board variant, Open Motion Controller Open Hardware board currently used by the group build of http://tvrrug.org.uk The board can be found at http://solderpad.com/folknology/open-motion-controller/ Signed-off-by: Michel Pollet <buserror@gmail.com>	13 years ago
Michel Pollet	aa6e6e914e	Makefile: Redone + Removed most explicit pathnames, use the standard make "VPATH" to let make find the files for itself. + Added a "hardware variant" variable that allows compiging Sanguino and Gen7 as well as "generic" arduino. + Allows overriding the MOTHERBOARD define from the Makefile + Removed the 'preprocessor' bit that wasn't needed, now just "include" the files that are needed, since it allows gcc to show the right file/line when displaying error/warnings. + Uses gcc's own dependency generator to generate the .d files, and and include these instead of self-patching the makefile Signed-off-by: Michel Pollet <buserror@gmail.com>	13 years ago
Bernhard	0183e6332a	made prepare->autostart independent of current folder.	13 years ago
Bernhard	1532200435	found error in filenames. One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely	13 years ago
Erik van der Zalm	b985e4a134	Fixed compile errors in ultralcd when no ultra_lcd is selected.	13 years ago
Erik van der Zalm	2e749d60c3	Added DISABLE_MAX_ENDSTOPS	13 years ago
Erik van der Zalm	33f5697888	PPID tune exports more constants.	13 years ago
Erik van der Zalm	f5eae52098	Added more manage_inactivity checks	13 years ago
Erik van der Zalm	910f4e77a2	Added 20MHz support.	13 years ago
Erik van der Zalm	87ff2f8867	Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)	13 years ago
Erik van der Zalm	387fe51a56	Do not disable steppers when there are moves in the queue.	13 years ago
Erik van der Zalm	421264e58a	Fixed typo	13 years ago
Erik van der Zalm	15ad923310	Removed !!!. Stupid arduino bootloader can't handle this.	13 years ago
Erik van der Zalm	61e09e6be2	Added FAN_PIN -1 checks	13 years ago
Erik van der Zalm	87c4e06c24	Corrected active_extruder when autotemp is used.	13 years ago
Erik van der Zalm	c077316b2b	Added PID autotune. (experimental) M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed. Put these values in Configuration.h	13 years ago
Ben Gamari	49b228c4b3	Add instructions to regenerate speed_lookuptable when changing F_CPU	13 years ago
Ben Gamari	96509494f0	stepper: Clarify comment on timer-counter configuration	13 years ago
Ben Gamari	6d7e6a11fc	Add create_speed_lookup	13 years ago
Tommy Cheng	ce07c9186d	While Waiting for hotbed to warm up via M190, LCD Display and Click Encoder input freeze until target temperature is reached.	13 years ago
Erik van der Zalm	116dc86b8a	Fixed type in e-jerk	13 years ago
Blair Thompson	02ee9e3d30	Changed Pin Assignment for the RAMPS motherboard so that LCD and Rotary encoder are all wired to AUX-4 This simplifies wiring for those with RAMPS 1.3 and 1.4 boards.	13 years ago
Erik van der Zalm	e056bf8081	Added E-Jerk	13 years ago
Erik van der Zalm	4deeffbc88	Added missing defines to the german section. Translation still needed.	13 years ago
Erik van der Zalm	aac7aa3bf0	Queued fan control. Issue #90	13 years ago
Christian Thalhammer	fde51084f3	set SD file delete to M30; switch printime output to M31	13 years ago
Erik van der Zalm	21e2bae063	Changed (corrected?) SD_card comment handling.	13 years ago
Erik van der Zalm	072011a3ef	Added current_block = NULL to quickStop()	13 years ago
Erik van der Zalm	f598077af3	Removed vc files	13 years ago
Erik van der Zalm	ed951b1977	Fixed RAMPS 1.2 support (Found and fixed by rrhb)	13 years ago

... 53 54 55 56 57 ...

3765 Commits (2bb56ef6deff56f2073ceddc9cf7fde6fa676f4b)