e8e0697e48
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/Printrboard compatibility.
11 years ago
75f39fadfc
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HARDWARE_MOTHERBOARD=={8,81,82,83,84})
11 years ago
df194f75e1
Added PT100 support for Ultiboard2
11 years ago
380144c20f
Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original.
11 years ago
89a304fd98
Merge pull request #673 from fsantini/ErikZalm
Improvements to the auto bed leveling feature
11 years ago
6ae7f7870d
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
11 years ago
17d6d965dc
Use C++ initialization list
This is the recommended approach for object initialization. The change
doesn't affect binary size (although in theory it could make it smaller).
11 years ago
8f195844dd
Merge pull request #687 from jrbenito/update_delta_config_examples
Correct missing parameter from last upmerge
11 years ago
ce8b9c4fc5
Correct missing parameter from last upmerge
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
11 years ago
000b710c5f
Merge pull request #684 from jrbenito/update_delta_config_examples
Update Delta example files
11 years ago
8e48e24c7f
Update Delta example files
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
11 years ago
46d2443c7d
Merge pull request #676 from IVI053/Marlin_v1
Minor improvements for encoder configuration, LCD entry for PSU controll and thermistor pins on RAMPS
11 years ago
eed053dffb
Revert "Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs"
This reverts commit b7eadb9f37
11 years ago
3e568efe67
Merge pull request #657 from hcker2000/patch-1
Added new board
11 years ago
8349fc89a4
Fixed planner bug
11 years ago
da2a6f9a31
Accurate bed leveling: x loop inside y and zigzag motion
11 years ago
532289e851
Merge pull request #677 from RicardoGA/patch-1
Z and Y dual stepper drivers error
11 years ago
d29615dc0c
Z and Y dual stepper drivers error
if you try to enable Z_DUAL_STEPPER_DRIVERS the error "You cannot have dual drivers for both Y and Z" shows even if you don't have defined Y_DUAL_STEPPER_DRIVERS and don't let you compile the firmware
to solve this problem i change this line:
#ifdef Z_DUAL_STEPPER_DRIVERS && Y_DUAL_STEPPER_DRIVERS
to:
#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS)
now the error only show if you define both Z_DUAL_STEPPER_DRIVERS and Y_DUAL_STEPPER_DRIVERS
11 years ago
5bde7fcb28
Minor code and comment polishing
11 years ago
20faff5935
Incorporate PS_DEFAULT_OFF for starting state on LCD menu entry
11 years ago
e5d3044801
Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability
11 years ago
b7eadb9f37
Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs
11 years ago
e016a720f4
Merge pull request #675 from forrestg/master
Added support for Cheaptronic v1 electronic
11 years ago
e8786bf110
Added support for Cheaptronic v1 electronic
11 years ago
cc2925b705
Implemented a least squares fit of the bed equation for auto bed leveling.
The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here:
http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html
(see qr_solve.cpp for further copyright information)
11 years ago
b64661070e
Fixed the plane vector equation to a simpler one (only dependent on the normal)
Removed the calculation of the inverse matrix since the rotation matrix is orthogonal, therefore inverted == transposed.
Much simpler and mathematically robust.
11 years ago
5c44f6c434
Bed Heater monitoring in Controller Fan
In some cases the Bed Heater FET heats up more then stepper drivers, so
this change add the bed monitoring to the controller fan. As soon as the
bed heater is turned on, the controller fan will run as well.
11 years ago
b33375d438
Z Axis Safe Homing when using Z Probe
Recommended for those who are using the Z Probe for Z Homing (as
Z-Endstop)
This feature has two changes:
1) Allow user to choose where the Z Probe will touch the bed when homing
all axis together (G28) by setting below defines:
Z_SAFE_HOMING_X_POINT
Z_SAFE_HOMING_Y_POINT
2) Prevents the user to perform Z Axis Homing when the Z Probe is
outsite bed.
11 years ago
35905ea4f9
Allow heaters to stay full On when PWM=127
In previous version, even with PWM = 127, the system turns the FET off
and then on in the next cycle. This bevavior may increase the FET heat
dissipation.
It was fixed keeping the FET always On when PWM=127.
11 years ago
ad588e8990
Added new board for those of us with sanguinololu boards with ceramic resonators
11 years ago
a94e588765
Changed slow buttons behavior.
11 years ago
69af392554
Added HEATERS_PARALLEL (Request from reifsnyderb)
This allows a hot end with two heaters and a FET for each heater. This is useful if the FET is not capable of heating two heaters.
11 years ago
48a185d004
Fixed compile errors from bad commits.
11 years ago
24d1f480b6
Merge pull request #647 from shaggythesheep/newfeature-M226
Implement M226 - GCode Initiated Pause
11 years ago
95b41413e6
Merge pull request #641 from hugokernel/master
M80 - ATX Power On related modification
11 years ago
59b96e323e
Merge pull request #640 from fmalpartida/SAV-MkI
Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD
11 years ago
2433ee6fc8
Merge pull request #637 from justuswilhelm/Marlin_v1
Fix servo control for Melzi v2.0
11 years ago
3455a2bac2
Merge pull request #636 from PrintToPeer/Marlin_v1
Add UUID support to M115 responses.
11 years ago
ec1cf6e7f8
Merge pull request #635 from dbenamy/Marlin_v1
Add (correct) missing pin definitions for Y2
11 years ago
dc887ef99b
Implement M226 - GCode Initiated Pause
Implemented M226 as described here:
http://reprap.org/wiki/G-code#M226:_Gcode_Initiated_Pause
Waits for pin to be become either HIGH, LOW or the inverse of what it
was before. Allows printing to pause until user interaction
11 years ago
c244eb860c
If you have a switch on suicide pin, this is useful if you want to
start another print with suicide feature after a print without
suicide...
11 years ago
7b556d2e96
Added BT support on AT90USB devices
Added AT90USB device BT connectivity support using second UART.
11 years ago
a5e8575829
Add UUID support to M115 responses.
11 years ago
cab84e0e5b
Add (correct) missing pin definitions for Y2
I tested this and it works.
11 years ago
5b3f60ea2e
Corrected LCD only error
If only an LCD is defined and no menu or keyboard defined, there is a
compilation error.
Added conditional compilation.
11 years ago
62d0b79023
Fix servo control for Melzi
11 years ago
c184f808f7
Merge pull request #632 from dbenamy/Marlin_v1
Made instructions more clear.
11 years ago
c886f5cb13
Made instructions more clear.
Not sure what happened to my last commit so this includes that one + reordering the steps.
11 years ago
b5a964fcc5
Initial SAV MkI (RepRap CloneWars board) integration.
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
11 years ago
4382068f92
Merge pull request #630 from dumle29/Marlin_v1
PS_ON configurable boot state
11 years ago
David Forrest
daid
alexborro
fsantini
Phil Wise
ErikZalm
Joseivaldo Benito Junior
-
RicardoGA
Michal Dyntar
hcker2000
Richard Miles
Charles R
fmalpartida
Kaz Walker
Daniel Benamy
Justus Perlwitz