dea686cf55
Define short pin names in fastio for STM32 ( #10461 )
6 years ago
428c54f2ad
[2.0.x] HAL for STM32F4 ( #10434 )
6 years ago
20772492aa
Fix compile warnings in AVR fastio.h ( #10440 )
6 years ago
c9aed73987
Fix missed includes from HAL macro patch ( #10416 )
6 years ago
29dda871cb
Patch "upload_disk" to make python happy
6 years ago
cc6d41e1d3
Use a macro for HAL header redirection ( #10380 )
6 years ago
85014cd132
[2.0.x] LPC1768 - automatic selection of upload disk ( #10374 )
6 years ago
44a697ab04
Set STM32F1 TEMP_TIMER_FREQUENCY to 1K
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803
6 years ago
9ff4e9e1e6
Patch _IS_HW_SPI so defined() works
6 years ago
0e8242180d
Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
6 years ago
acda4ecb20
Fix DUE Trinamic SW/HW SPI sanity check ( #10336 )
6 years ago
ab715c70d1
TMC SPI sanity-check and pins debugging ( #10324 )
6 years ago
902c885782
Switch to TMC2130 compatible hardware SPI & misc ( #10299 )
6 years ago
93305a2d5e
Fix some spellings
6 years ago
889fd5f71f
Backtrace minor cleanup
6 years ago
cbdc78ec0f
Fix STM32 compilation with PlatformIO ( #10245 )
6 years ago
749f19e502
[2.0.x] Move backtrace to a shared location ( #10237 )
- And implement the `backtrace()` function call
6 years ago
7dc256432f
Restore STM32F1 series to working order. ( #10229 )
The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.
6 years ago
8934a2c49b
Added some missing Thumb instructions to the traceback follower, so now it is able to traceback through switch() statements
6 years ago
328edea03a
Several fixes to the backtracer. Tested ant it works
6 years ago
9a24c0ae3f
Tons of fixes to the backtracker code, and also added an extra backtracker that does not require unwind tables to work and it is used if unwind tables are absent
6 years ago
509227fd80
change to mode 0
6 years ago
c3b23974bd
Added detection of case when no unwind tables are available
6 years ago
b210bdf032
Now the Crash reporter uses the configured BAUDRATE to send the report through the Programming port. And also shows the traceback of functions as discussed. For that latest feature to work, you need to compile the project with -funwind-tables and -mpoke-function-name compiler flags
6 years ago
c5730cf711
As Bob-The-Khun suggested, resetting the USB peripheral solves the huge startup delays that happen when a WDT reset happens and we are connected through the native port
6 years ago
97e8a6ebd9
Various fixes for DUE... ( #10152 )
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
6 years ago
785dbfc72d
[2.0.x] FASTIO consistency ( #10164 )
6 years ago
7308ef7809
Add conditional, give DUE SPI a unique name, fix compiler warnings ( #10168 )
6 years ago
53362b81cc
Tone fixes/changes ( #10151 )
6 years ago
bbfbf90797
Fix for DUE - no host support on native USB if SD card not enabled ( #10148 )
6 years ago
7f1afbfd60
can't type
6 years ago
23760d6c14
add full speed option
6 years ago
cbcd1ed42d
full speed
6 years ago
404fc94705
DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin
6 years ago
b858c638ad
Fix compiler warning for HAL_ANALOG_SELECT
6 years ago
36452b4d6e
Fix filename HAL/DUE/servotimers.h => ServoTimers.h
6 years ago
703c8ac0ef
Added Arduino-compatible kludge to the (ATMEL supplied) SAM3X USB stack we are now using so the Native port is also usable as a programming port on Arduino DUE and derived designs
6 years ago
dd19e74476
Cleanup trailing whitespace
@Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.
6 years ago
0d8c15c01f
restore PR 9661 files & V1 fix
6 years ago
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"
6 years ago
239902f861
Fix E2END and add EEPROM to Smart RAMPS
Reference #9983
6 years ago
914bb80bde
removed SDSS init
added device & comm drivers for shared SPI LCDs
mistyped some updates in ultralcd_impl_DOGM.h
remove unwanted changes in onfiguration.h
still can't type
Update HAL_LCD_class_defines.h
include USB mass storage & misc
6 years ago
67a17446f2
Fix DUE incompatible enum type specification ( #10017 )
6 years ago
3c58ca181c
[2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 ( #10016 )
6 years ago
e297748b22
Apply const, safe_delay in servo.*
6 years ago
98d48fc731
Followup to HAL_timer_restrain
Followup to #9985
6 years ago
ca577c1638
Fix up various spacing, comments, and typos
6 years ago
d45f19d385
Remove Unicode from var name
6 years ago
224688cc3b
Fix for unicode-ignorant gcc preprocessor
6 years ago
a1a88ebabc
HAL function to ensure min stepper interrupt interval ( #9985 )
6 years ago
Scott Lahteine
Karl Andersson
GMagician
Chris Pepper
Scott Lahteine
Bob-the-Kuhn
Lenbok
Alexey Shvetsov
Eduardo José Tagle
xC0000005