Browse Source

Fix DUE incompatible enum type specification (#10017)

pull/1/head
Bob-the-Kuhn 7 years ago
committed by Scott Lahteine
parent
commit
67a17446f2
  1. 11
      .travis.yml
  2. 4
      Marlin/src/HAL/HAL_DUE/usb/genclk.h
  3. 2
      Marlin/src/HAL/HAL_DUE/usb/pll.h
  4. 2
      Marlin/src/HAL/HAL_DUE/usb/sbc_protocol.h
  5. 10
      Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h
  6. 26
      Marlin/src/HAL/HAL_DUE/usb/usb_protocol.h
  7. 4
      Marlin/src/HAL/HAL_DUE/usb/usb_protocol_cdc.h
  8. 2
      Marlin/src/HAL/HAL_DUE/usb/usb_protocol_msc.h

11
.travis.yml

@ -429,6 +429,17 @@ script:
- pins_set RAMPS X_MAX_PIN -1
- opt_add_adv Z2_MAX_PIN 2
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#############################
# DUE default config test
#############################
- export TEST_PLATFORM="-e DUE"
- restore_configs
- opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB
- cp Marlin/Configuration.h Marlin/src/config/default/Configuration.h
- cp Marlin/Configuration_adv.h Marlin/src/config/default/Configuration_adv.h
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#############################
# LPC1768 default config test

4
Marlin/src/HAL/HAL_DUE/usb/genclk.h

@ -73,7 +73,7 @@ extern "C" {
//! \name Programmable Clock Sources (PCK)
//@{
enum genclk_source : char {
enum genclk_source {
GENCLK_PCK_SRC_SLCK_RC = 0, //!< Internal 32kHz RC oscillator as PCK source clock
GENCLK_PCK_SRC_SLCK_XTAL = 1, //!< External 32kHz crystal oscillator as PCK source clock
GENCLK_PCK_SRC_SLCK_BYPASS = 2, //!< External 32kHz bypass oscillator as PCK source clock
@ -92,7 +92,7 @@ enum genclk_source : char {
//! \name Programmable Clock Prescalers (PCK)
//@{
enum genclk_divider : char {
enum genclk_divider {
GENCLK_PCK_PRES_1 = PMC_PCK_PRES_CLK_1, //!< Set PCK clock prescaler to 1
GENCLK_PCK_PRES_2 = PMC_PCK_PRES_CLK_2, //!< Set PCK clock prescaler to 2
GENCLK_PCK_PRES_4 = PMC_PCK_PRES_CLK_4, //!< Set PCK clock prescaler to 4

2
Marlin/src/HAL/HAL_DUE/usb/pll.h

@ -76,7 +76,7 @@ extern "C" {
#define PLL_COUNT 0x3fU
enum pll_source : char {
enum pll_source {
PLL_SRC_MAINCK_4M_RC = OSC_MAINCK_4M_RC, //!< Internal 4MHz RC oscillator.
PLL_SRC_MAINCK_8M_RC = OSC_MAINCK_8M_RC, //!< Internal 8MHz RC oscillator.
PLL_SRC_MAINCK_12M_RC = OSC_MAINCK_12M_RC, //!< Internal 12MHz RC oscillator.

2
Marlin/src/HAL/HAL_DUE/usb/sbc_protocol.h

@ -80,7 +80,7 @@
//! \name SBC-2 Mode page definitions
//@{
enum scsi_sbc_mode : char {
enum scsi_sbc_mode {
SCSI_MS_MODE_RW_ERR_RECOV = 0x01, //!< Read-Write Error Recovery mode page
SCSI_MS_MODE_FORMAT_DEVICE = 0x03, //!< Format Device mode page
SCSI_MS_MODE_FLEXIBLE_DISK = 0x05, //!< Flexible Disk mode page

10
Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h

@ -184,7 +184,7 @@ struct scsi_request_sense_data {
COMPILER_PACK_RESET()
/* Vital Product Data page codes */
enum scsi_vpd_page_code : char {
enum scsi_vpd_page_code {
SCSI_VPD_SUPPORTED_PAGES = 0x00,
SCSI_VPD_UNIT_SERIAL_NUMBER = 0x80,
SCSI_VPD_DEVICE_IDENTIFICATION = 0x83,
@ -202,7 +202,7 @@ enum scsi_vpd_page_code : char {
/* Sense keys */
enum scsi_sense_key : char {
enum scsi_sense_key {
SCSI_SK_NO_SENSE = 0x0,
SCSI_SK_RECOVERED_ERROR = 0x1,
SCSI_SK_NOT_READY = 0x2,
@ -220,7 +220,7 @@ enum scsi_sense_key : char {
};
/* Additional Sense Code / Additional Sense Code Qualifier pairs */
enum scsi_asc_ascq : char {
enum scsi_asc_ascq {
SCSI_ASC_NO_ADDITIONAL_SENSE_INFO = 0x0000,
SCSI_ASC_LU_NOT_READY_REBUILD_IN_PROGRESS = 0x0405,
SCSI_ASC_WRITE_ERROR = 0x0c00,
@ -239,7 +239,7 @@ enum scsi_asc_ascq : char {
* used with MODE SELECT and MODE SENSE commands
* that are applicable to all SCSI devices.
*/
enum scsi_spc_mode : char {
enum scsi_spc_mode {
SCSI_MS_MODE_VENDOR_SPEC = 0x00,
SCSI_MS_MODE_INFEXP = 0x1C, // Informational exceptions control page
SCSI_MS_MODE_ALL = 0x3f,
@ -273,7 +273,7 @@ struct spc_control_page_info_execpt {
};
enum scsi_spc_mode_sense_pc : char {
enum scsi_spc_mode_sense_pc {
SCSI_MS_SENSE_PC_CURRENT = 0,
SCSI_MS_SENSE_PC_CHANGEABLE = 1,
SCSI_MS_SENSE_PC_DEFAULT = 2,

26
Marlin/src/HAL/HAL_DUE/usb/usb_protocol.h

@ -107,7 +107,7 @@
/**
* \brief Standard USB requests (bRequest)
*/
enum usb_reqid : char {
enum usb_reqid {
USB_REQ_GET_STATUS = 0,
USB_REQ_CLEAR_FEATURE = 1,
USB_REQ_SET_FEATURE = 3,
@ -125,7 +125,7 @@ enum usb_reqid : char {
* \brief Standard USB device status flags
*
*/
enum usb_device_status : char {
enum usb_device_status {
USB_DEV_STATUS_BUS_POWERED = 0,
USB_DEV_STATUS_SELF_POWERED = 1,
USB_DEV_STATUS_REMOTEWAKEUP = 2
@ -135,7 +135,7 @@ enum usb_device_status : char {
* \brief Standard USB Interface status flags
*
*/
enum usb_interface_status : char {
enum usb_interface_status {
USB_IFACE_STATUS_RESERVED = 0
};
@ -143,7 +143,7 @@ enum usb_interface_status : char {
* \brief Standard USB endpoint status flags
*
*/
enum usb_endpoint_status : char {
enum usb_endpoint_status {
USB_EP_STATUS_HALTED = 1,
};
@ -152,7 +152,7 @@ enum usb_endpoint_status : char {
*
* \note valid for SetFeature request.
*/
enum usb_device_feature : char {
enum usb_device_feature {
USB_DEV_FEATURE_REMOTE_WAKEUP = 1, //!< Remote wakeup enabled
USB_DEV_FEATURE_TEST_MODE = 2, //!< USB test mode
USB_DEV_FEATURE_OTG_B_HNP_ENABLE = 3,
@ -165,7 +165,7 @@ enum usb_device_feature : char {
*
* \note valid for USB_DEV_FEATURE_TEST_MODE request.
*/
enum usb_device_hs_test_mode : char {
enum usb_device_hs_test_mode {
USB_DEV_TEST_MODE_J = 1,
USB_DEV_TEST_MODE_K = 2,
USB_DEV_TEST_MODE_SE0_NAK = 3,
@ -176,14 +176,14 @@ enum usb_device_hs_test_mode : char {
/**
* \brief Standard USB endpoint feature/status flags
*/
enum usb_endpoint_feature : char {
enum usb_endpoint_feature {
USB_EP_FEATURE_HALT = 0,
};
/**
* \brief Standard USB Test Mode Selectors
*/
enum usb_test_mode_selector : char {
enum usb_test_mode_selector {
USB_TEST_J = 0x01,
USB_TEST_K = 0x02,
USB_TEST_SE0_NAK = 0x03,
@ -194,7 +194,7 @@ enum usb_test_mode_selector : char {
/**
* \brief Standard USB descriptor types
*/
enum usb_descriptor_type : char {
enum usb_descriptor_type {
USB_DT_DEVICE = 1,
USB_DT_CONFIGURATION = 2,
USB_DT_STRING = 3,
@ -212,7 +212,7 @@ enum usb_descriptor_type : char {
/**
* \brief USB Device Capability types
*/
enum usb_capability_type : char {
enum usb_capability_type {
USB_DC_USB20_EXTENSION = 0x02,
};
@ -220,7 +220,7 @@ enum usb_capability_type : char {
* \brief USB Device Capability - USB 2.0 Extension
* To fill bmAttributes field of usb_capa_ext_desc_t structure.
*/
enum usb_capability_extension_attr : char {
enum usb_capability_extension_attr {
USB_DC_EXT_LPM = 0x00000002,
};
@ -253,7 +253,7 @@ enum usb_capability_extension_attr : char {
/**
* \brief Standard USB endpoint transfer types
*/
enum usb_ep_type : char {
enum usb_ep_type {
USB_EP_TYPE_CONTROL = 0x00,
USB_EP_TYPE_ISOCHRONOUS = 0x01,
USB_EP_TYPE_BULK = 0x02,
@ -264,7 +264,7 @@ enum usb_ep_type : char {
/**
* \brief Standard USB language IDs for string descriptors
*/
enum usb_langid : char {
enum usb_langid {
USB_LANGID_EN_US = 0x0409, //!< English (United States)
};

4
Marlin/src/HAL/HAL_DUE/usb/usb_protocol_cdc.h

@ -239,13 +239,13 @@ typedef struct {
uint8_t bDataBits;
} usb_cdc_line_coding_t;
//! Possible values of bCharFormat
enum cdc_char_format : char {
enum cdc_char_format {
CDC_STOP_BITS_1 = 0, //!< 1 stop bit
CDC_STOP_BITS_1_5 = 1, //!< 1.5 stop bits
CDC_STOP_BITS_2 = 2, //!< 2 stop bits
};
//! Possible values of bParityType
enum cdc_parity : char {
enum cdc_parity {
CDC_PAR_NONE = 0, //!< No parity
CDC_PAR_ODD = 1, //!< Odd parity
CDC_PAR_EVEN = 2, //!< Even parity

2
Marlin/src/HAL/HAL_DUE/usb/usb_protocol_msc.h

@ -93,7 +93,7 @@
/**
* \brief MSC USB requests (bRequest)
*/
enum usb_reqid_msc : unsigned char {
enum usb_reqid_msc {
USB_REQ_MSC_BULK_RESET = 0xFF, //!< Mass Storage Reset
USB_REQ_MSC_GET_MAX_LUN = 0xFE //!< Get Max LUN
};

Loading…
Cancel
Save