19d418cd6a
Fix up the code to eliminate warnings
10 years ago
4385ac4f9d
Merge pull request #1707 from thinkyhead/fixup_temperature
Always 4 temp sensors
10 years ago
410f64782a
Always 4 temp sensors
10 years ago
d2e73545ba
Merge pull request #1705 from AnHardt/ddt
Avoid warnings in SanitiCheck.h
10 years ago
81aec66d21
Merge pull request #1704 from AnHardt/firstAid1703
First aid for #1703
10 years ago
1ff6df8f9e
Avoid warnings in SanitiCheck.h
/SanityCheck.h:107:53: warning: missing terminating ' character
...
10 years ago
ebe5b87c2c
< like in the oher compareble loops
to avoid:
Marlin_main.cpp:1790: warning: array subscript is above array bounds.
10 years ago
9e8427f253
Merge pull request #1698 from zeuseye/Development
Clean "fromsd" array if not SDSUPPORT
10 years ago
46601b1c65
Merge pull request #1696 from epatel/mesh-docs
Instructions for Mesh Bed Leveling
10 years ago
7667023817
Merge pull request #1694 from Wurstnase/fix_z_config
comment #define Z_DUAL_STEPPER_DRIVERS
10 years ago
ad05a726c1
Merge pull request #1691 from AnHardt/PID_dt
Move definition of PIDdT back to temperature.h
10 years ago
02b4f5f9cd
Merge pull request #1689 from AnHardt/MAXand161
Fix MAX6675 again and introduce set_current_temp_raw()
10 years ago
f680e509c4
Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR()
10 years ago
d43d47da14
Clean "fromsd" array is not SDSUPPORT
if not have SDSUPPORT the fromsd array is not necessary
10 years ago
ac81b4084f
Make variables and function static.
10 years ago
92a7260fd0
typos
10 years ago
4a78db29eb
Added instructions for Mesh bed leveling
10 years ago
55025558dc
Implement Dry-Run mode in G29
It just probe all the bed without appliying the matrix.
Useful after a first G29 to check the topology.
10 years ago
a4ad9117dd
comment #define Z_DUAL_STEPPER_DRIVERS
10 years ago
01cc97a3c3
Corected condition for PIDdT
10 years ago
94330705c7
Move definition of PIDdT back to temperature.h
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
10 years ago
dd0067afa6
Fix MAX6675 again and introduce set_current_temp_raw()
to make the temperature-code work again with Arduino 1.0.6.
Sorry could not make an extra block on base level.
10 years ago
80ae160c26
Merge pull request #1688 from AnHardt/ultra-menu-fix
Add the missed {} to END_MENU in ultralcd.cpp
10 years ago
8848b7e9ef
Add the missed {} to END_MENU in ultralcd.cpp
what caused an extra update of encoderLine most of the time.
10 years ago
c2ba5d0c09
Fix ZigZag and Topograph table
ZigZag: Inverted Behavior.. If T supplied, it does not zigzag.
Topograph table: The table was rotated 90º clockwise.
10 years ago
0ce3576685
New Feature: Z_DUAL_ENDSTOPS
Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z
steppers - Let's call them Z stepper and Z2 stepper.
That way the machine is capable to align the bed during home, since both
Z steppers are homed.
There is also an implementation of M666 (software endstops adjustment)
to this feature.
After Z homing, this adjustment is applied to just one of the steppers
in order to align the bed.
One just need to home the Z axis and measure the distance difference
between both Z axis and apply the math: Z adjust = Z - Z2.
If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it
is.. think about it) and the Z adjust would be positive.
Play a little bit with small adjustments (0.5mm) and check the
behaviour.
The M119 (endstops report) will start reporting the Z2 Endstop as well.
10 years ago
512a0056a9
Merge pull request #1658 from thinkyhead/planner_oh_planner
Cleanup of planner code
10 years ago
8db4fd7177
Merge branch 'Development' into planner_oh_planner
Latest upstream commits
10 years ago
c6df5f4d85
small text correction
10 years ago
8dd94ccf58
Initial list from perusing the commit logs
10 years ago
4afe50b920
Merge pull request #1651 from thinkyhead/config_testing
Configuration sanity-checking
10 years ago
0d81abe1c9
Merge branch 'Development' into config_testing
Latest upstream commits
10 years ago
01740fd9c6
Merge branch 'Development' into planner_oh_planner
Latest upstream commits
10 years ago
e2576b1ac5
Merge pull request #1674 from thinkyhead/fix_temperature_minmax
Cleanup temperature code
10 years ago
8b004d26c1
Merge pull request #1681 from thinkyhead/marlin_configurator
A logo for the Marlin wiki
10 years ago
fc53e43de6
Don't test raw temp for MAX6675
- Remove test of raw temp for thermistor 0 when using MAX6675
- Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`
10 years ago
03fa9fae9f
Merge branch 'Development' into fix_temperature_minmax
Latest upstream commits
10 years ago
b1a7f74ee4
A logo for the Marlin wiki
10 years ago
2606da9e81
Merge pull request #1678 from Nutz95/Development
Report changes from previous PR (#1670 ) from old code base including :
10 years ago
1fac388664
Revert measurement loop
10 years ago
37cde8a191
Report changes from previous PR from old code base including :
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
10 years ago
b26a3ea02c
Merge pull request #1662 from josla972/refactor_scara
Refactor SCARA calibration. Save some lines of code and possibly ROM.
10 years ago
36474be8eb
Merge pull request #1675 from Wurstnase/Development
fix bad insertion config again
10 years ago
e6f6c6e3a1
fix bad insertion config again
10 years ago
6bdee87be3
Cleanup temperature code
- Get rid of unused temp states in the ISR, resulting in more frequent
temperature reading with fewer sensors
- Shrink code slightly in min/max testing
10 years ago
34a41648ab
Merge branch 'Development' into planner_oh_planner
Latest upstream commits
10 years ago
4fbb80567e
Get upstream commits
10 years ago
f65f61fa72
Merge pull request #1672 from thinkyhead/fix_probeaction
Fix mangled probe_pt calls
10 years ago
7717e1ce33
Fix bad insert in configuration
10 years ago
146501215f
Fix mangled probe_pt calls
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
10 years ago
Scott Lahteine
Scott Lahteine
AnHardt
Victor Torre
Edward Patel
alexborro
wurstnase
nicolas-rambaud