d372e7e477
SDIO support for STM32F1 ( #12782 )
6 years ago
60cb36bef3
Misc. improvements ( #12747 )
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
6 years ago
18fedafbc5
Refresh screen on SD Init
6 years ago
c986239837
A single SERIAL_ECHO macro type ( #12557 )
6 years ago
03ef2d6c82
Fix "paused" message and M125 called by M25 ( #12551 )
6 years ago
e98d195901
Remove extra declarations in cardreader.cpp ( #12520 )
6 years ago
643e0066a0
Followup to #12451
6 years ago
c1e17037e5
Various fixes for MarlinUI and ExtUI ( #12439 )
6 years ago
66580f32c2
Make CardReader class static ( #12451 )
* Make CardReader a static class
* Make CardReader flags into bitfields
6 years ago
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
6 years ago
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
6 years ago
471f403a67
Reduce code size with plain inlines
6 years ago
4f72e041f2
Use card.stopSDPrint() for completeness
6 years ago
f5eab912ed
Apply #pragma once, misc cleanup ( #12322 )
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
6 years ago
42f8b6c530
Make M125 work with SDSUPPORT ( #12289 )
6 years ago
b5d7f69b51
Followup to #12249
6 years ago
66d44c72c3
Add fast binary file transfer to SD card option ( #12249 )
6 years ago
f9b80e7217
Make getfilename_sorted standard for listings
6 years ago
1a00d1bdaf
Add pullup to USB interrupt line
- A pullup on the INT pin is required when the pin is level-active
6 years ago
44369d536a
Use millis_t where needed ( #12152 )
6 years ago
1fb9b299d4
Add M524 to abort SD printing ( #12155 )
6 years ago
d26d9d5b81
Tweak IS_SD_INSERTED
6 years ago
c6a5c74208
Add parentheses to SD macros
6 years ago
71e19baf69
Fix kill => disable_all_heaters => print_job_timer.stop ( #12146 )
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
6 years ago
5b7dd553d3
Fix sd_mmc_spi_mem capacity; clean up USB code ( #12134 )
- Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card.
- Clean up the USB flashdrive code and add better debugging.
6 years ago
9bf5d4331c
Clear up some compiler warnings
6 years ago
2067619a26
Add USB_FLASH_DRIVE_SUPPORT
6 years ago
3019713402
Reorganize some enums
6 years ago
065e9c3d66
Add card.longest_filename method
6 years ago
d05e832f29
Add STM32F1 support for SD-based EEPROM
6 years ago
8c0ec81a19
Followup to #11187
6 years ago
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY ( #11187 )
6 years ago
4b2af6ab48
Minor patches to POWER_LOSS_RECOVERY
6 years ago
fbf1c9b496
Fix and tweak POWER_LOSS_RECOVERY ( #11151 )
6 years ago
e970e429b6
[2.0.x] Fix null check in lsDive ( #10978 )
6 years ago
c2bdbdffaa
Prevent a buffer overflow in diveToFile
Co-Authored-By: akunt
6 years ago
8b44745bc7
Clean up and consolidate SD-related code ( #10831 )
6 years ago
a11eb50a3e
Refactor and optimize Stepper/Planner
Better encapsulation and considerably reduce stepper jitter
6 years ago
306f0f2135
Move Stepper::synchronize to Planner ( #10713 )
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
6 years ago
d1b619be52
Standardize some hexadecimals
6 years ago
05fca752d6
Clean up autostart handling
6 years ago
11ab017dd0
Creality3D Power-Loss Recovery
6 years ago
2efc072fdb
Clear progress bar on completion ( #10333 )
Fix #10330
6 years ago
902c885782
Switch to TMC2130 compatible hardware SPI & misc ( #10299 )
6 years ago
97e8a6ebd9
Various fixes for DUE... ( #10152 )
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
6 years ago
2e43438e0c
Add C parameter to M27 to include the long filename
In answer to #10001
Add an option to retrieve the currently open file name (long filename if possible).
6 years ago
2168d6ac25
Allow NULL prepend in lsDive
6 years ago
22a017a856
Rebuild SD file sort array on Stop SD Print ( #9976 )
Thanks Chuck Hellebuyck.
6 years ago
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
* SD Status auto-report feature
Feature Request #9751
6 years ago
02474a321a
Fix SDSUPPORT (and indentation)
Based on https://github.com/MarlinFirmware/Marlin/issues/8746#issuecomment-368471901 by @benlye
6 years ago
jmz52
Marcio Teixeira
Scott Lahteine
Scott Lahteine
Ludy
Chris Pepper
TheSFReader
Giuliano
etagle
Bob-the-Kuhn