andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Move temp errors calling kill() out of ISR (#21832)

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
parent
06e965e29c
commit
ffcbe68570
2 changed files with 94 additions and 91 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 165
      Marlin/src/module/temperature.cpp
  2. 12
      Marlin/src/module/temperature.h

165
Marlin/src/module/temperature.cpp
View File

@ -576,8 +576,7 @@ volatile bool Temperature::raw_temps_ready = false;
const millis_t ms = millis();
if (raw_temps_ready) { // temp sample ready
updateTemperaturesFromRawValues();
if (updateTemperaturesIfReady()) { // temp sample ready
// Get the current temperature and constrain it
current_temp = GHV(degChamber(), degBed(), degHotend(heater_id));
@ -1212,9 +1211,7 @@ void Temperature::manage_heater() {
}
#endif
if (!raw_temps_ready) return;
updateTemperaturesFromRawValues(); // also resets the watchdog
if (!updateTemperaturesIfReady()) return; // Will also reset the watchdog if temperatures are ready
#if DISABLED(IGNORE_THERMOCOUPLE_ERRORS)
#if TEMP_SENSOR_0_IS_MAX_TC
@ -1890,29 +1887,88 @@ void Temperature::manage_heater() {
#endif // HAS_TEMP_PROBE
/**
* Get the raw values into the actual temperatures.
* The raw values are created in interrupt context,
* and this function is called from normal context
* as it would block the stepper routine.
* Convert the raw sensor readings into actual Celsius temperatures and
* validate raw temperatures. Bad readings generate min/maxtemp errors.
*
* The raw values are generated entirely in interrupt context, and this
* method is called from normal context once 'raw_temps_ready' has been
* set by update_raw_temperatures().
*
* The watchdog is dependent on this method. If 'raw_temps_ready' stops
* being set by the interrupt so that this method is not called for over
* 4 seconds then something has gone afoul and the machine will be reset.
*/
void Temperature::updateTemperaturesFromRawValues() {
watchdog_refresh(); // Reset because raw_temps_ready was set by the interrupt
TERN_(TEMP_SENSOR_0_IS_MAX_TC, temp_hotend[0].raw = READ_MAX_TC(0));
TERN_(TEMP_SENSOR_1_IS_MAX_TC, TERN(TEMP_SENSOR_1_AS_REDUNDANT, temp_redundant, temp_hotend[1]).raw = READ_MAX_TC(1));
#if HAS_HOTEND
HOTEND_LOOP() temp_hotend[e].celsius = analog_to_celsius_hotend(temp_hotend[e].raw, e);
#endif
TERN_(TEMP_SENSOR_1_AS_REDUNDANT, temp_redundant.celsius = analog_to_celsius_hotend(temp_redundant.raw, 1));
TERN_(HAS_HEATED_BED, temp_bed.celsius = analog_to_celsius_bed(temp_bed.raw));
TERN_(HAS_TEMP_CHAMBER, temp_chamber.celsius = analog_to_celsius_chamber(temp_chamber.raw));
TERN_(HAS_TEMP_COOLER, temp_cooler.celsius = analog_to_celsius_cooler(temp_cooler.raw));
TERN_(HAS_TEMP_PROBE, temp_probe.celsius = analog_to_celsius_probe(temp_probe.raw));
TERN_(FILAMENT_WIDTH_SENSOR, filwidth.update_measured_mm());
TERN_(HAS_POWER_MONITOR, power_monitor.capture_values());
// Reset the watchdog on good temperature measurement
watchdog_refresh();
#if HAS_HOTEND
static constexpr int8_t temp_dir[] = {
TERN(TEMP_SENSOR_0_IS_MAX_TC, 0, TEMPDIR(0))
#if HAS_MULTI_HOTEND
, TERN(TEMP_SENSOR_1_IS_MAX_TC, 0, TEMPDIR(1))
#if HOTENDS > 2
#define _TEMPDIR(N) , TEMPDIR(N)
REPEAT_S(2, HOTENDS, _TEMPDIR)
#endif
#endif
};
LOOP_L_N(e, COUNT(temp_dir)) {
const int8_t tdir = temp_dir[e];
if (tdir) {
const int16_t rawtemp = temp_hotend[e].raw * tdir; // normal direction, +rawtemp, else -rawtemp
if (rawtemp > temp_range[e].raw_max * tdir) max_temp_error((heater_id_t)e);
const bool heater_on = temp_hotend[e].target > 0;
if (heater_on && rawtemp < temp_range[e].raw_min * tdir && !is_preheating(e)) {
#if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1
if (++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED)
#endif
min_temp_error((heater_id_t)e);
}
#if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1
else
consecutive_low_temperature_error[e] = 0;
#endif
}
}
#endif // HAS_HOTEND
#if ENABLED(THERMAL_PROTECTION_BED)
#define BEDCMP(A,B) (TEMPDIR(BED) < 0 ? ((A)<(B)) : ((A)>(B)))
if (BEDCMP(temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED);
if (temp_bed.target > 0 && BEDCMP(mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED);
#endif
#if BOTH(HAS_HEATED_CHAMBER, THERMAL_PROTECTION_CHAMBER)
#define CHAMBERCMP(A,B) (TEMPDIR(CHAMBER) < 0 ? ((A)<(B)) : ((A)>(B)))
if (CHAMBERCMP(temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER);
if (temp_chamber.target > 0 && CHAMBERCMP(mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER);
#endif
raw_temps_ready = false;
#if BOTH(HAS_COOLER, THERMAL_PROTECTION_COOLER)
#define COOLERCMP(A,B) (TEMPDIR(COOLER) < 0 ? ((A)<(B)) : ((A)>(B)))
if (cutter.unitPower > 0 && COOLERCMP(temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER);
if (COOLERCMP(mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER);
#endif
}
#if THERMO_SEPARATE_SPI
@ -2657,6 +2713,9 @@ void Temperature::disable_all_heaters() {
/**
* Update raw temperatures
*
* Called by ISR => readings_ready when new temperatures have been set by updateTemperaturesFromRawValues.
* Applies all the accumulators to the current raw temperatures.
*/
void Temperature::update_raw_temperatures() {
@ -2686,14 +2745,19 @@ void Temperature::update_raw_temperatures() {
TERN_(HAS_JOY_ADC_X, joystick.x.update());
TERN_(HAS_JOY_ADC_Y, joystick.y.update());
TERN_(HAS_JOY_ADC_Z, joystick.z.update());
raw_temps_ready = true;
}
/**
* Called by the Temperature ISR when all the ADCs have been processed.
* Reset all the ADC accumulators for another round of updates.
*/
void Temperature::readings_ready() {
// Update the raw values if they've been read. Else we could be updating them during reading.
if (!raw_temps_ready) update_raw_temperatures();
// Update raw values only if they're not already set.
if (!raw_temps_ready) {
update_raw_temperatures();
raw_temps_ready = true;
}
// Filament Sensor - can be read any time since IIR filtering is used
TERN_(FILAMENT_WIDTH_SENSOR, filwidth.reading_ready());
@ -2711,75 +2775,6 @@ void Temperature::readings_ready() {
TERN_(HAS_JOY_ADC_X, joystick.x.reset());
TERN_(HAS_JOY_ADC_Y, joystick.y.reset());
TERN_(HAS_JOY_ADC_Z, joystick.z.reset());
#if HAS_HOTEND
static constexpr int8_t temp_dir[] = {
TERN(TEMP_SENSOR_0_IS_MAX_TC, 0, TEMPDIR(0))
#if HAS_MULTI_HOTEND
, TERN(TEMP_SENSOR_1_IS_MAX_TC, 0, TEMPDIR(1))
#if HOTENDS > 2
#define _TEMPDIR(N) , TEMPDIR(N)
REPEAT_S(2, HOTENDS, _TEMPDIR)
#endif
#endif
};
LOOP_L_N(e, COUNT(temp_dir)) {
const int8_t tdir = temp_dir[e];
if (tdir) {
const int16_t rawtemp = temp_hotend[e].raw * tdir; // normal direction, +rawtemp, else -rawtemp
if (rawtemp > temp_range[e].raw_max * tdir) max_temp_error((heater_id_t)e);
const bool heater_on = (temp_hotend[e].target > 0 || TERN0(PIDTEMP, temp_hotend[e].soft_pwm_amount > 0));
if (heater_on && rawtemp < temp_range[e].raw_min * tdir && !is_preheating(e)) {
#if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1
if (++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED)
#endif
min_temp_error((heater_id_t)e);
}
#if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1
else
consecutive_low_temperature_error[e] = 0;
#endif
}
}
#endif // HAS_HOTEND
#if ENABLED(THERMAL_PROTECTION_BED)
#if TEMPDIR(BED) < 0
#define BEDCMP(A,B) ((A)<(B))
#else
#define BEDCMP(A,B) ((A)>(B))
#endif
const bool bed_on = (temp_bed.target > 0) || TERN0(PIDTEMPBED, temp_bed.soft_pwm_amount > 0);
if (BEDCMP(temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED);
if (bed_on && BEDCMP(mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED);
#endif
#if BOTH(HAS_HEATED_CHAMBER, THERMAL_PROTECTION_CHAMBER)
#if TEMPDIR(CHAMBER) < 0
#define CHAMBERCMP(A,B) ((A)<(B))
#else
#define CHAMBERCMP(A,B) ((A)>(B))
#endif
const bool chamber_on = (temp_chamber.target > 0);
if (CHAMBERCMP(temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER);
if (chamber_on && CHAMBERCMP(mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER);
#endif
#if BOTH(HAS_COOLER, THERMAL_PROTECTION_COOLER)
#if TEMPDIR(COOLER) < 0
#define COOLERCMP(A,B) ((A)<(B))
#else
#define COOLERCMP(A,B) ((A)>(B))
#endif
if (cutter.unitPower > 0) {
if (COOLERCMP(temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER);
}
if (COOLERCMP(mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER);
#endif
}
/**

12
Marlin/src/module/temperature.h
View File

@ -419,8 +419,6 @@ class Temperature {
private:
static volatile bool raw_temps_ready;
#if ENABLED(WATCH_HOTENDS)
static hotend_watch_t watch_hotend[HOTENDS];
#endif
@ -880,9 +878,19 @@ class Temperature {
#endif
private:
// Reading raw temperatures and converting to Celsius when ready
static volatile bool raw_temps_ready;
static void update_raw_temperatures();
static void updateTemperaturesFromRawValues();
static inline bool updateTemperaturesIfReady() {
if (!raw_temps_ready) return false;
updateTemperaturesFromRawValues();
raw_temps_ready = false;
return true;
}
// MAX Thermocouples
#if HAS_MAX_TC
#define MAX_TC_COUNT 1 + BOTH(TEMP_SENSOR_0_IS_MAX_TC, TEMP_SENSOR_1_IS_MAX_TC)
#if MAX_TC_COUNT > 1

Write Preview
Loading…
Cancel
Save